Wraps by car

Alfa Romeo MiTo wrap

The Alfa Romeo MiTo wrap page covers the single generation produced from 2008 to 2018 as a three-door hatchback. A full vinyl wrap of this subcompact car uses about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. The estimate rises to about 59 ft (18 m) when the wrap includes chrome or patterned film.

1generations14.5 mof film for a full wrap

Alfa Romeo MiTo, first generation, factory photo
Alfa Romeo MiTo, first generation. Factory color shown.

Alfa Romeo MiTo wrap colors and ideas

  • MiTo black wrap
  • MiTo white wrap
  • MiTo gray wrap
  • MiTo silver wrap
  • MiTo red wrap
  • MiTo blue wrap
  • MiTo green wrap
  • MiTo yellow wrap
  • MiTo orange wrap
  • MiTo purple wrap
  • MiTo pink wrap
  • MiTo teal wrap
  • MiTo brown wrap
  • MiTo gold wrap
  • MiTo chrome wrap
  • MiTo color shift wrap
  • MiTo carbon fiber wrap
  • MiTo camo and patterned wrap

How much vinyl to wrap an Alfa Romeo MiTo

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2018hatchback (3 doors)160.0 in (4,063 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

MiTo wrap cost factors

MiTo wrap cost depends on the amount of film, the number of cut-outs, and how many panels are done. The subcompact body needs about 48 ft (14.5 m) for a full wrap, which sets a clear film quantity. Cut-outs for sensors, cameras, or fog lamps on some trims add time and care to the job. The two long doors and the tailgate are large pieces, while the glass areas are never wrapped.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2013, 2016: bumpers and lights differ between the versions, and so do the film cuts.

MiTo wraps by generation

Swipe sideways. Tap a card for the full description.

Alfa Romeo MiTo, first generation, factory photo
Factory color shown

2008–2018 MiTo hatchback (first generation)

2008–2018hatchback (3 doors)160.0 in (4,063 mm)

The first generation Alfa Romeo MiTo was built from 2008 to 2018 as a three-door hatchback. On the roof, the glass panel is not wrapped, so the roof stays dark whatever the color of the film. The film ends at the roof rails on cars with the panoramic glass roof.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a MiTo

A partial wrap on a MiTo can cover the hood, mirror caps, or the roof on cars without the glass panel. MiTo chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is offered as clear film on the front end.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Alfa Romeo MiTo: body, cut-outs and film

The Alfa Romeo MiTo vinyl wrap is shaped by its short 160.0 in (4,063 mm) body and two long side doors. Each door is wrapped as one large piece, which makes the sides of this hatchback quicker to cover than a four-door car. The tailgate holds the rear glass, so the film ends neatly at the edge of the glass.

MiTo wrap ideas must account for the parts that need cut-outs or are removed during installation. Some trims have parking sensors in the bumpers, and the film is cut around each sensor. Some trims have cameras in the body, so each lens needs its own cut-out. Fog lamps on some trims also require cut-outs in the front bumper film.

To calculate how much vinyl to wrap a MiTo, the single generation keeps the film estimate steady at about 48 ft (14.5 m) of 60-inch film. The body was restyled in 2013 and 2016, but those changes do not alter the amount of film needed. Counting film for this car is therefore a fixed figure across all production years.

Questions about wrapping an Alfa Romeo MiTo

How much vinyl does it take to wrap an Alfa Romeo MiTo?

A full wrap of an Alfa Romeo MiTo takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. If the wrap includes chrome or patterned film, the estimate rises to about 59 ft (18 m).

Can the roof of a MiTo be wrapped?

Yes, the roof of a MiTo can be wrapped, but the panoramic glass roof on some trims is not wrapped. On cars with the glass panel, the film ends at the roof rails and the glass stays dark.

Which years of the MiTo take the same film cuts?

All years of the MiTo, from 2008 to 2018, take the same film cuts because the body style never changed. The restylings in 2013 and 2016 did not change the outer dimensions or the wrap-relevant parts.

Can I wrap only the hood or the roof of a MiTo?

Yes, you can wrap only the hood or the roof of a MiTo. The hood and the roof on cars without the glass panel are part of the listed partial wrap options, along with mirror caps.