Wraps by car

Alfa Romeo 33 wrap

The Alfa Romeo 33 wrap page covers the first and second generation of this compact car. A full vinyl wrap of the newest body takes about 48 ft (14.5 m) for the hatchback to 51 ft (15.5 m) for the wagon. Both generations share the same overall length range, from 160.4 in (4,075 mm) to 165.4 in (4,200 mm).

2generations15.5 mof film for a full wrap

Alfa Romeo 33, second generation, factory photo
Alfa Romeo 33, second generation. Factory color shown.

Alfa Romeo 33 wrap colors and ideas

  • Alfa Romeo 33 black wrap
  • Alfa Romeo 33 white wrap
  • Alfa Romeo 33 gray wrap
  • Alfa Romeo 33 silver wrap
  • Alfa Romeo 33 red wrap
  • Alfa Romeo 33 blue wrap
  • Alfa Romeo 33 green wrap
  • Alfa Romeo 33 yellow wrap
  • Alfa Romeo 33 orange wrap
  • Alfa Romeo 33 purple wrap
  • Alfa Romeo 33 pink wrap
  • Alfa Romeo 33 teal wrap
  • Alfa Romeo 33 brown wrap
  • Alfa Romeo 33 gold wrap
  • Alfa Romeo 33 chrome wrap
  • Alfa Romeo 33 color shift wrap
  • Alfa Romeo 33 carbon fiber wrap
  • Alfa Romeo 33 camo and patterned wrap

How much vinyl to wrap an Alfa Romeo 33

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1990–1994hatchback, wagon (5 doors)160.4 in (4,075 mm) to 165.4 in (4,200 mm)about 48 ft (14.5 m) for the hatchback to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)
1983–1989sedan, wagon (4 or 5 doors)160.4 in (4,075 mm) to 165.3 in (4,199 mm)about 46 ft (14 m) for the sedan to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m)

Alfa Romeo 33 wrap cost factors

Alfa Romeo 33 wrap cost depends on the body style, the film amount and the condition of the paint. The wagon needs more film than the hatchback or sedan, so material cost is higher on that body. Paint that is original on a car from 1983 to 1994 may be fragile, and a repainted panel can react differently to the adhesive. The final cost also changes with the number of cut-outs around the tailgate glass and the removal of trim.

  • Film for a full wrap: about 48 ft (14.5 m) for the hatchback to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).
  • Body: hatchback, wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Alfa Romeo 33 wraps by generation

Swipe sideways. Tap a card for the full description.

Alfa Romeo 33, second generation, factory photo
Factory color shown

1990–1994 Alfa Romeo 33 hatchback, wagon (second generation)

1990–1994hatchback, wagon (5 doors)160.4 in (4,075 mm) to 165.4 in (4,200 mm)

The second generation Alfa Romeo 33 came as a hatchback or a wagon with five doors. The wagon uses about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, and the hatchback uses about 48 ft (14.5 m). The body style decides the panel plan, because the wagon has a longer roof and extra glass on the rear sides.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the hatchback to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Alfa Romeo 33, first generation, factory photo
Factory color shown

1983–1989 Alfa Romeo 33 sedan, wagon (first generation)

1983–1989sedan, wagon (4 or 5 doors)160.4 in (4,075 mm) to 165.3 in (4,199 mm)

The first generation Alfa Romeo 33 was built from 1983 to 1989 as a sedan or a wagon with four or five doors. Paint age matters on a car of these years because panels may be original or repainted, and a test spot comes before a full wrap. A sedan from this generation starts at about 46 ft (14 m) of 60-inch (1.52 m) cast film, while the wagon takes about 51 ft (15.5 m).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) for the sedan to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on an Alfa Romeo 33

An Alfa Romeo 33 chrome delete covers the window trim and badges with black film. A partial wrap can be the roof, the hood or the mirror caps on either body style. Paint protection film (PPF) is clear film installed on the front end to guard against stone chips. These smaller jobs use less material than a full wrap and can be done in stages.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Alfa Romeo 33: body, cut-outs and film

An Alfa Romeo 33 vinyl wrap is sized by the body style you have. The second generation was built as a hatchback or a five-door wagon, and the wagon needs more film than the hatchback. The first generation offered a sedan or a wagon with four or five doors, so the door count also affects the panel plan. All bodies stay within a length range of 160.4 in (4,075 mm) to 165.4 in (4,200 mm), so extra material comes mostly from the roof and tailgate.

Alfa Romeo 33 wrap ideas start with the tailgate because the rear glass is set into it. The film ends at the edge of the glass on every 33, so the installer trims around that shape. Emblems and door handles are removed for a clean edge, and the side moldings can stay on if they are sound. The wrap around the tailgate takes extra time because the glass does not come out of the panel.

To know how much vinyl to wrap an Alfa Romeo 33, you look at the generation and the body. The second generation hatchback uses about 48 ft (14.5 m) of 60-inch (1.52 m) cast film, while the first generation sedan uses about 46 ft (14 m). A wagon from either generation takes about 51 ft (15.5 m), so the roof and rear pillars add the difference. If the film is chrome or has a pattern, order up to about 64 ft (19.5 m) to allow for matching.

Questions about wrapping an Alfa Romeo 33

How much vinyl does it take to wrap an Alfa Romeo 33?

A full wrap of an Alfa Romeo 33 takes about 48 ft (14.5 m) to 51 ft (15.5 m) of 60-inch (1.52 m) cast film, depending on the body. The hatchback uses the lower amount, and the wagon uses the higher amount. If you choose chrome or patterned film, you may need up to about 64 ft (19.5 m) to match the pattern.

Which Alfa Romeo 33 body takes more film?

The wagon body of the Alfa Romeo 33 takes more film than the hatchback or the sedan. A wagon from either generation needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film, while the hatchback uses about 48 ft (14.5 m) and the sedan about 46 ft (14 m). The extra roof area and the rear side glass add to the film amount.

Can I wrap only the hood or the roof of an Alfa Romeo 33?

You can wrap only the hood or the roof of an Alfa Romeo 33 as a partial wrap. The roof and the hood are separate panels with clear edges, so they are good candidates for a color change without a full wrap. Mirror caps are another small job that changes the look for less film.

Is an Alfa Romeo 33 hard to wrap?

An Alfa Romeo 33 is not especially hard to wrap, but the tailgate adds work because the rear glass is set into it. The film must end at the edge of the glass, so the installer trims a precise line around that shape. The car is compact at 160.4 in (4,075 mm) to 165.4 in (4,200 mm) long, which makes most panels easy to reach.