Wraps by car

Alfa Romeo 6 wrap

The Alfa Romeo 6 wrap guide covers the first generation sedan made from 1979 to 1988. A full vinyl wrap of this full-size four-door body takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film work requires about 64 ft (19.5 m). The page has one generation with its body styles, sizes, and wrap planning details.

1generations16 mof film for a full wrap

Alfa Romeo 6, first generation, factory photo
Alfa Romeo 6, first generation. Factory color shown.

Alfa Romeo 6 wrap colors and ideas

  • Alfa Romeo 6 black wrap
  • Alfa Romeo 6 white wrap
  • Alfa Romeo 6 gray wrap
  • Alfa Romeo 6 silver wrap
  • Alfa Romeo 6 red wrap
  • Alfa Romeo 6 blue wrap
  • Alfa Romeo 6 green wrap
  • Alfa Romeo 6 yellow wrap
  • Alfa Romeo 6 orange wrap
  • Alfa Romeo 6 purple wrap
  • Alfa Romeo 6 pink wrap
  • Alfa Romeo 6 teal wrap
  • Alfa Romeo 6 brown wrap
  • Alfa Romeo 6 gold wrap
  • Alfa Romeo 6 chrome wrap
  • Alfa Romeo 6 color shift wrap
  • Alfa Romeo 6 carbon fiber wrap
  • Alfa Romeo 6 camo and patterned wrap

How much vinyl to wrap an Alfa Romeo 6

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1979–1988sedan (4 doors)187.4 in (4,760 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Alfa Romeo 6 wrap cost factors

Alfa Romeo 6 wrap cost is set by the size of the sedan, the film choice, and the condition of the panels. A 187.4 in (4,760 mm) body uses about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome delete adds window trim and badges, which takes more labor. Paint correction before wrapping adds time when the finish is rough.

  • Film for a full wrap: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: sedan (4 doors).

Alfa Romeo 6 wraps by generation

Swipe sideways. Tap a card for the full description.

Alfa Romeo 6, first generation, factory photo
Factory color shown

1979–1988 Alfa Romeo 6 sedan (first generation)

1979–1988sedan (4 doors)187.4 in (4,760 mm)

The first generation Alfa Romeo 6 was built from 1979 to 1988 as a four-door sedan. Paint age on a car of these years means panels may be original or repainted, and a test spot comes before a full wrap. Installers check adhesion on old clear coat and touched-up areas. The full-size body is 187.4 in (4,760 mm) long, which sets the material count.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on an Alfa Romeo 6

Alfa Romeo 6 chrome delete is one of the smaller jobs on this car. The window trim and badges can be covered with black film without wrapping whole panels. A partial wrap takes the roof, hood, or mirror caps and leaves the rest of the paint exposed. Paint protection film (PPF) in clear film is applied to the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Alfa Romeo 6: body, cut-outs and film

An Alfa Romeo 6 vinyl wrap is planned around one sedan body that is 187.4 in (4,760 mm) long. The four doors add seams and long lower rocker panels that use material. A full-size body like this needs wide film pieces on the roof and hood. Installers use cast film for the curves and recessed areas of this body.

Alfa Romeo 6 wrap ideas begin with the parts that need cut-outs or removal. Door handles, mirrors, badges, and trim come off for clean edges. The front and rear bumpers have recesses that take extra time. Window rubbers must be masked so the film tucks without lifting.

How much vinyl to wrap an Alfa Romeo 6 depends on the one generation cataloged. The 1979–1988 sedan is the only body on this page, so film figures stay to that shape. Anyone counting film uses the 52 ft (16 m) estimate for a full color change. Chrome or patterned film adds about 12 ft (3.5 m).

Questions about wrapping an Alfa Romeo 6

How much vinyl does it take to wrap an Alfa Romeo 6?

A full wrap of an Alfa Romeo 6 takes about 52 ft (16 m) of 60-inch (1.52 m) cast film. Chrome or patterned film work needs about 64 ft (19.5 m). These figures are for the first-generation four-door sedan.

Can I wrap only the hood or the roof of an Alfa Romeo 6?

Yes, you can wrap only the hood or the roof of an Alfa Romeo 6. A partial wrap covers the roof, hood, or mirror caps as separate jobs. The rest of the paint stays exposed, and material use drops below the full wrap figure.

Is an Alfa Romeo 6 hard to wrap?

The Alfa Romeo 6 adds work because of its size and trim. The 187.4 in (4,760 mm) sedan has long roof and rocker panels that need wide film pieces. Door handles, badges, and window trim have to come off for clean edges.

How many generations of the Alfa Romeo 6 does this page cover?

This page covers one generation of the Alfa Romeo 6. The first generation was made from 1979 to 1988 as a four-door sedan.