Wraps by car

Alfa Romeo 6C wrap

The Alfa Romeo 6C wrap page covers the 1927–1933 first generation sports car, offered as a convertible with two doors. A full vinyl wrap of this body takes about 39 ft (12 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan for about 44 ft (13.5 m). The page also covers wrap ideas, partial jobs, and common questions.

1generations12 mof film for a full wrap

Alfa Romeo 6C, first generation, factory photo
Alfa Romeo 6C, first generation. Factory color shown.

Alfa Romeo 6C wrap colors and ideas

  • Alfa Romeo 6C black wrap
  • Alfa Romeo 6C white wrap
  • Alfa Romeo 6C gray wrap
  • Alfa Romeo 6C silver wrap
  • Alfa Romeo 6C red wrap
  • Alfa Romeo 6C blue wrap
  • Alfa Romeo 6C green wrap
  • Alfa Romeo 6C yellow wrap
  • Alfa Romeo 6C orange wrap
  • Alfa Romeo 6C purple wrap
  • Alfa Romeo 6C pink wrap
  • Alfa Romeo 6C teal wrap
  • Alfa Romeo 6C brown wrap
  • Alfa Romeo 6C gold wrap
  • Alfa Romeo 6C chrome wrap
  • Alfa Romeo 6C color shift wrap
  • Alfa Romeo 6C carbon fiber wrap
  • Alfa Romeo 6C camo and patterned wrap

How much vinyl to wrap an Alfa Romeo 6C

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1927–1933convertible (2 doors)177.2 in (4,500 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m)

Alfa Romeo 6C wrap cost factors

Alfa Romeo 6C wrap cost is driven by the size of the car, the film type, and the labor for the body's details. A full wrap uses about 39 ft (12 m) of cast film, or about 44 ft (13.5 m) for chrome or patterned film. The convertible top is not wrapped, which reduces material, but the curved fenders and tight grille area add installation time. The cost also depends on how much disassembly is needed for the trim and lights.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Alfa Romeo 6C wraps by generation

Swipe sideways. Tap a card for the full description.

Alfa Romeo 6C, first generation, factory photo
Factory color shown

1927–1933 Alfa Romeo 6C convertible (first generation)

1927–1933convertible (2 doors)177.2 in (4,500 mm)

The open top of the first generation Alfa Romeo 6C from 1927–1933 is not wrapped with vinyl. The film ends where the fabric top begins, along the beltline and around the rear deck. A folding hard top, if fitted, is wrapped as its own panels. Installers cut the film neatly at the top edge and tuck it under any trim or weather seals.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m).

Roof, hood, chrome delete and PPF on an Alfa Romeo 6C

An Alfa Romeo 6C chrome delete covers the window trim and badges with black film, leaving the paint unchanged. A partial wrap can include the hood, mirror caps, and rear deck for a two-tone look. Paint protection film is a clear option for the front end, guarding against stone chips on the fenders and grille surround. These smaller jobs use less film than a full wrap and focus on specific areas.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Alfa Romeo 6C: body, cut-outs and film

An Alfa Romeo 6C vinyl wrap has to follow the compact convertible body, which is 177.2 in (4,500 mm) long with two doors. The curved fenders and long hood need careful stretching of the film, so a full wrap uses about 39 ft (12 m) of material. Because there are no rear doors or large roof panel, the main surfaces are the hood, doors, rear deck, and lower body. The fabric top is not wrapped, so the film stops cleanly where the top begins.

For Alfa Romeo 6C wrap ideas, the main work is cutting around the headlights, grille, door handles, and badges. The fabric top is left unwrapped, and the film ends at its edge. The windshield frame and side windows need precise trimming, and the bumpers may be removed for a cleaner install. If the car has a folding hard top, that top is wrapped as separate panels.

How much vinyl to wrap an Alfa Romeo 6C depends on the body, and this car has one generation from 1927–1933. The convertible body calls for about 39 ft (12 m) of 60-inch (1.52 m) cast film for a full color change. If you choose chrome or patterned film, allow about 44 ft (13.5 m). There are no later generations to compare, so the estimate stays the same across all years of the 6C.

Questions about wrapping an Alfa Romeo 6C

How much vinyl does it take to wrap an Alfa Romeo 6C?

It takes about 39 ft (12 m) of 60-inch (1.52 m) cast film to wrap an Alfa Romeo 6C. For chrome or patterned film, the estimate is about 44 ft (13.5 m). These figures cover the full convertible body, excluding the fabric top.

Is the top of an Alfa Romeo 6C wrapped?

No, the top of an Alfa Romeo 6C is not wrapped if it is a fabric top. The film ends where the fabric begins, and only the body panels are covered. A folding hard top, if present, is wrapped as separate panels.

Can I wrap only the hood or the roof of an Alfa Romeo 6C?

Yes, you can wrap only the hood or the roof of an Alfa Romeo 6C as a partial wrap. Common choices include the hood, mirror caps, and rear deck. Since the 6C has no fixed roof, a roof wrap would apply only to a folding hard top model.

Is an Alfa Romeo 6C hard to wrap?

Yes, an Alfa Romeo 6C has some challenging areas for wrapping, mainly the curved fenders and the small details around the grille and lights. The convertible body is 177.2 in (4,500 mm) long, and the fabric top means the film must be trimmed precisely along its edge. The long hood and rear deck need large, smooth pieces, but the rounded fenders require stretching and relief cuts. Overall, it is a manageable car for an experienced installer.