Wraps by car

Alfa Romeo 90 wrap

The Alfa Romeo 90 wrap page covers the full-size sedan produced from 1984 to 1987. This catalog includes one generation of the Alfa Romeo 90. A full vinyl wrap of the body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Alfa Romeo 90, first generation, factory photo
Alfa Romeo 90, first generation. Factory color shown.

Alfa Romeo 90 wrap colors and ideas

  • Alfa Romeo 90 black wrap
  • Alfa Romeo 90 white wrap
  • Alfa Romeo 90 gray wrap
  • Alfa Romeo 90 silver wrap
  • Alfa Romeo 90 red wrap
  • Alfa Romeo 90 blue wrap
  • Alfa Romeo 90 green wrap
  • Alfa Romeo 90 yellow wrap
  • Alfa Romeo 90 orange wrap
  • Alfa Romeo 90 purple wrap
  • Alfa Romeo 90 pink wrap
  • Alfa Romeo 90 teal wrap
  • Alfa Romeo 90 brown wrap
  • Alfa Romeo 90 gold wrap
  • Alfa Romeo 90 chrome wrap
  • Alfa Romeo 90 color shift wrap
  • Alfa Romeo 90 carbon fiber wrap
  • Alfa Romeo 90 camo and patterned wrap

How much vinyl to wrap an Alfa Romeo 90

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1984–1987sedan (4 doors)172.8 in (4,390 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Alfa Romeo 90 wrap cost factors

Alfa Romeo 90 wrap cost depends on film choice, surface preparation, and the number of panels you wrap. The full-size sedan has four doors and a 172.8 in (4,390 mm) body, which sets the basic material amount. Paint condition on a 1984–1987 car can require extra correction before film is applied. A partial wrap or chrome delete will use less film than a full color change.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: sedan (4 doors).

Alfa Romeo 90 wraps by generation

Swipe sideways. Tap a card for the full description.

Alfa Romeo 90, first generation, factory photo
Factory color shown

1984–1987 Alfa Romeo 90 sedan (first generation)

1984–1987sedan (4 doors)172.8 in (4,390 mm)

The first generation Alfa Romeo 90 from 1984 to 1987 often has aging paint that affects vinyl wrap preparation. Original or repainted panels may react differently to adhesive, so a test spot is recommended before a full wrap. You may need to sand or prime flaking areas before laying film. This extra step adds time but prevents lifting later.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on an Alfa Romeo 90

A partial wrap on an Alfa Romeo 90 can cover the roof, hood, or mirror caps. An Alfa Romeo 90 chrome delete uses black film on the window trim and badges. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These jobs use less material than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Alfa Romeo 90: body, cut-outs and film

An Alfa Romeo 90 vinyl wrap is a straightforward job on a four-door sedan body. The car measures 172.8 in (4,390 mm) long, which makes panel sizes manageable. The square shape of the 1980s design means fewer complex curves for the film to follow. You will still need patience around the door handles and window trim.

Alfa Romeo 90 wrap ideas often start with a full color change or a satin finish. The window trim and badges are the main parts that need cut-outs or removal. Door handles and side mirrors also come off for a cleaner installation. Keeping the chrome bright is an option, but many choose to cover it with black film.

If you want to know how much vinyl to wrap an Alfa Romeo 90, the answer is a single-generation figure. The first generation from 1984 to 1987 uses about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 20% to that amount, or 61 ft (18.5 m). No other body style or length exists for this model.

Questions about wrapping an Alfa Romeo 90

How much vinyl does it take to wrap an Alfa Romeo 90?

Yes, an Alfa Romeo 90 takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap. If you choose chrome or patterned film, plan for 61 ft (18.5 m). The amount covers the sedan body of the single generation, 1984–1987.

Can I wrap only the hood or the roof of an Alfa Romeo 90?

Yes, you can wrap only the hood or the roof of an Alfa Romeo 90. Partial wrap jobs also include mirror caps, and an Alfa Romeo 90 chrome delete covers window trim and badges. Clear paint protection film on the front end is another smaller option.

Is an Alfa Romeo 90 hard to wrap?

An Alfa Romeo 90 is not especially hard to wrap, but the 1980s paint condition can add work. On a car of these years panels may be original or repainted, so a test spot comes before a full wrap. The sedan body is 172.8 in (4,390 mm) long with fairly flat panels, which helps installation.

How many generations of the Alfa Romeo 90 does this page cover?

This page covers one generation of the Alfa Romeo 90. The first generation was produced from 1984 to 1987 as a four-door sedan.