Wraps by car

Alfa Romeo Arna wrap

The Alfa Romeo Arna wrap page covers the first generation compact hatchback built from 1983 to 1987. A full vinyl wrap of this five-door body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 57 ft (17.5 m).

1generations14 mof film for a full wrap

Alfa Romeo Arna, first generation, factory photo
Alfa Romeo Arna, first generation. Factory color shown.

Alfa Romeo Arna wrap colors and ideas

  • Arna black wrap
  • Arna white wrap
  • Arna gray wrap
  • Arna silver wrap
  • Arna red wrap
  • Arna blue wrap
  • Arna green wrap
  • Arna yellow wrap
  • Arna orange wrap
  • Arna purple wrap
  • Arna pink wrap
  • Arna teal wrap
  • Arna brown wrap
  • Arna gold wrap
  • Arna chrome wrap
  • Arna color shift wrap
  • Arna carbon fiber wrap
  • Arna camo and patterned wrap

How much vinyl to wrap an Alfa Romeo Arna

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1983–1987hatchback (5 doors)157.5 in (4,000 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Arna wrap cost factors

Arna wrap cost depends on the size of the car, the film chosen, and the condition of the paint. The Arna is 157.5 in (4,000 mm) long, so a full wrap needs about 46 ft (14 m) of cast film, or about 57 ft (17.5 m) of chrome or patterned film. A color change wrap with a textured film costs more than a solid cast film. Removing parts like badges and mirrors adds labor time to the job.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Arna wraps by generation

Swipe sideways. Tap a card for the full description.

Alfa Romeo Arna, first generation, factory photo
Factory color shown

1983–1987 Arna hatchback (first generation)

1983–1987hatchback (5 doors)157.5 in (4,000 mm)

On a car of these years, panels may be original or repainted, so a test spot comes before a full wrap. The paint on a 1983–1987 Alfa Romeo Arna can hide filler or old repairs that affect adhesion. A professional will check a small area first to see how the film behaves. If the paint is too weak, the wrap may pull it off when removed.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on an Arna

Partial wrap jobs on the Arna include the roof, the hood, and the mirror caps. Arna chrome delete covers the window trim and the badges with black film. Paint protection film (PPF) is clear film applied to the front end. These smaller jobs cost less than a full wrap and use less film.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Alfa Romeo Arna: body, cut-outs and film

The Alfa Romeo Arna vinyl wrap is a single five-door hatchback body that measures 157.5 in (4,000 mm) long. The roofline is low and the panels are straightforward, so there are no long side stretches to fight. A small car like this uses less film than a large sedan, but the tall tailgate still needs a full sheet. The rear bumper is short, which helps when you trim the film around the license plate area.

Arna wrap ideas begin with the tailgate, which has the rear glass set into it, so the film ends at the edge of the glass. The door handles, mirror caps, and badges can be removed for a cleaner wrap. You will need to cut around the side repeaters and the front indicators. The roof gutter trim is narrow, so take care when tucking the film there.

How much vinyl to wrap an Arna does not change between generations, because this page covers one generation only. The first generation from 1983 to 1987 is the only body style, a five-door hatchback. If you count film for a full wrap, the estimate stays about 46 ft (14 m) of 60-inch cast film. There were no long-wheelbase or three-door versions to alter the panel sizes.

Questions about wrapping an Alfa Romeo Arna

How much vinyl does it take to wrap an Alfa Romeo Arna?

A full wrap of an Alfa Romeo Arna takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the amount rises to about 57 ft (17.5 m). These figures are for the five-door hatchback body from 1983 to 1987.

Can I wrap only the hood or the roof of an Arna?

Yes, you can wrap only the hood or the roof of an Arna. The partial wrap options for this car include the roof, hood, and mirror caps. You can also do a chrome delete on the window trim and badges, or apply paint protection film to the front end.

Is an Arna hard to wrap?

An Arna is not hard to wrap, but the tailgate with the rear glass in it adds work because the film ends at the edge of the glass. The car is compact at 157.5 in (4,000 mm), so panels are small and easy to handle. The main care point is the old paint, which may need a test spot before a full wrap.

How many generations of the Arna does this page cover?

This page covers one generation of the Alfa Romeo Arna. The first generation was produced from 1983 to 1987 as a five-door hatchback.