Wraps by car

Alfa Romeo GTA Coupe wrap

This page covers the Alfa Romeo GTA Coupe wrap, one generation built from 1965 to 1975. A full vinyl wrap of the newest body uses about 46 ft (14 m) of 60-inch (1.52 m) cast film. Chrome or patterned film takes about 57 ft (17.5 m). The car is a two-door sports car coupe.

1generations14 mof film for a full wrap

Alfa Romeo GTA Coupe, first generation, factory photo
Alfa Romeo GTA Coupe, first generation. Factory color shown.

Alfa Romeo GTA Coupe wrap colors and ideas

  • GTA Coupe black wrap
  • GTA Coupe white wrap
  • GTA Coupe gray wrap
  • GTA Coupe silver wrap
  • GTA Coupe red wrap
  • GTA Coupe blue wrap
  • GTA Coupe green wrap
  • GTA Coupe yellow wrap
  • GTA Coupe orange wrap
  • GTA Coupe purple wrap
  • GTA Coupe pink wrap
  • GTA Coupe teal wrap
  • GTA Coupe brown wrap
  • GTA Coupe gold wrap
  • GTA Coupe chrome wrap
  • GTA Coupe color shift wrap
  • GTA Coupe carbon fiber wrap
  • GTA Coupe camo and patterned wrap

How much vinyl to wrap an Alfa Romeo GTA Coupe

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1965–1975coupe (2 doors)166.6 in (4,232 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

GTA Coupe wrap cost factors

The GTA Coupe wrap cost depends on the body area and the film type you choose. A full color change on the 166.6 in (4,232 mm) coupe needs about 46 ft (14 m) of 60-inch (1.52 m) film. Chrome or patterned film raises the film amount to about 57 ft (17.5 m). Paint condition and the amount of trim removal also affect the labor.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

GTA Coupe wraps by generation

Swipe sideways. Tap a card for the full description.

Alfa Romeo GTA Coupe, first generation, factory photo
Factory color shown

1965–1975 GTA Coupe coupe (first generation)

1965–1975coupe (2 doors)166.6 in (4,232 mm)

The first generation Alfa Romeo GTA Coupe ran from 1965 to 1975 as a two-door coupe. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The body is 166.6 in (4,232 mm) long. Installing film on such an older body requires checking surface condition first.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a GTA Coupe

For smaller jobs than a full wrap, the GTA Coupe can receive a partial wrap on the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These options let you change the look or protect the paint without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Alfa Romeo GTA Coupe: body, cut-outs and film

The Alfa Romeo GTA Coupe vinyl wrap deals with a short two-door coupe body measuring 166.6 in (4,232 mm) in length. The two long side doors are each one large piece of film. The simple coupe shape has no complex rear doors or long roof sections. The small size keeps the total film use low.

These GTA Coupe wrap ideas start with the two long side doors, each wrapped as one large piece of film. The door handles and mirrors need cut-outs or removal for a clean finish. The front bumper and grille surround are also areas where film must be trimmed carefully. Working slowly around the badges keeps the wrap neat.

If you count film by generation, the first generation of the GTA Coupe is the only one in this catalog. It ran from 1965 to 1975 in a single coupe body style. There is no earlier or later body to compare. All film estimates on this page refer to that one body.

Questions about wrapping an Alfa Romeo GTA Coupe

How much vinyl does it take to wrap an Alfa Romeo GTA Coupe?

It takes about 46 ft (14 m) of 60-inch (1.52 m) cast film to wrap an Alfa Romeo GTA Coupe in a solid color. For chrome or patterned film the amount rises to about 57 ft (17.5 m). The car is a two-door coupe with a body length of 166.6 in (4,232 mm). These figures cover the first generation built from 1965 to 1975.

Can I wrap only the hood or the roof of a GTA Coupe?

Yes, you can wrap only the hood or the roof of a GTA Coupe. A partial wrap of the roof, hood, or mirror caps is a smaller job than a full wrap. You can also do a chrome delete on the window trim and badges. Paint protection film (PPF) on the front end is another partial option.

Is a GTA Coupe hard to wrap?

The GTA Coupe has two long side doors, each requiring one large piece of film, which adds work. The body is 166.6 in (4,232 mm) long, a compact size that helps with handling film. Chrome and patterned film use more material, about 57 ft (17.5 m). On a car of these years paint condition may vary, so a test spot is wise before a full wrap.

How many generations of the GTA Coupe does this page cover?

This page covers one generation of the Alfa Romeo GTA Coupe, built from 1965 to 1975. It is the first generation and the only body style in this catalog. The car is a two-door sports car coupe. All film estimates refer to that generation.