Wraps by car

Alfa Romeo Sprint wrap

The Alfa Romeo Sprint wrap page covers the first-generation Sprint, a compact hatchback produced from 1983 to 1989. A vinyl wrap on this car uses about 46 ft (14 m) of 60-inch (1.52 m) cast film for a standard color change. The page explains the body details, material amounts, and wrap options for this single-generation model.

1generations14 mof film for a full wrap

Alfa Romeo Sprint, first generation, factory photo
Alfa Romeo Sprint, first generation. Factory color shown.

Alfa Romeo Sprint wrap colors and ideas

  • Sprint black wrap
  • Sprint white wrap
  • Sprint gray wrap
  • Sprint silver wrap
  • Sprint red wrap
  • Sprint blue wrap
  • Sprint green wrap
  • Sprint yellow wrap
  • Sprint orange wrap
  • Sprint purple wrap
  • Sprint pink wrap
  • Sprint teal wrap
  • Sprint brown wrap
  • Sprint gold wrap
  • Sprint chrome wrap
  • Sprint color shift wrap
  • Sprint carbon fiber wrap
  • Sprint camo and patterned wrap

How much vinyl to wrap an Alfa Romeo Sprint

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1983–1989hatchback (3 doors)153.5 in (3,900 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m)

Sprint wrap cost factors

Sprint wrap cost depends on the film type and the condition of the body on this 1983–1989 hatchback. A chrome or patterned film needs about 56 ft (17 m), which adds material compared to a standard color wrap at 46 ft (14 m) of 60-inch (1.52 m) cast film. The installer's time also changes with the prep work on a car of this age, such as removing old trim or paint correction.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Sprint wraps by generation

Swipe sideways. Tap a card for the full description.

Alfa Romeo Sprint, first generation, factory photo
Factory color shown

1983–1989 Sprint hatchback (first generation)

1983–1989hatchback (3 doors)153.5 in (3,900 mm)

The first-generation Sprint from 1983 to 1989 may have original or repainted panels, so a test spot of film comes before a full wrap. Paint age affects how the adhesive bonds and how easily the film comes off later. Checking a small area first shows whether the old paint can hold a wrap without damage.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 56 ft (17 m).

Roof, hood, chrome delete and PPF on a Sprint

Sprint chrome delete covers the window trim and badges with black film, and a partial wrap can include the roof, hood, or mirror caps. Paint protection film (PPF) on the front end is a clear film option for this hatchback. These smaller jobs let you change specific areas without wrapping the whole car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping an Alfa Romeo Sprint: body, cut-outs and film

The Alfa Romeo Sprint vinyl wrap suits a compact 3-door hatchback with a length of 153.5 in (3,900 mm). The small body and one-piece tailgate keep the film plan straightforward compared to larger cars. The two long side doors each take one large piece of film, so seams stay off the main panels.

Sprint wrap ideas start with the tailgate, where the film ends at the edge of the rear glass because the glass is built into the tailgate. The two side doors are wrapped as one large piece each, so you avoid a seam running down the middle of the door. You may also remove badges and door handles before wrapping for a cleaner finish.

To figure out how much vinyl to wrap a Sprint, you only need the first-generation hatchback made from 1983 to 1989. This page gives a single estimate because the car did not change body style during its production run. The film amount stays the same for every Sprint from those years, as long as the panels are original.

Questions about wrapping an Alfa Romeo Sprint

How much vinyl does it take to wrap an Alfa Romeo Sprint?

It takes about 46 ft (14 m) of 60-inch (1.52 m) cast film to wrap a standard Alfa Romeo Sprint in one color. If you choose a chrome or patterned film, plan for about 56 ft (17 m) instead. These amounts come from the wrap estimate for this single-generation hatchback.

Can I wrap only the hood or the roof of a Sprint?

Yes, you can wrap only the hood or the roof of a Sprint as a partial wrap, and the same goes for the mirror caps. A chrome delete on the window trim and badges is another smaller option. Paint protection film (PPF) on the front end gives clear coverage without a full color change.

Is a Sprint hard to wrap?

A Sprint is not hard to wrap, but the tailgate with the glass built in adds a step because the film must end at the edge of the glass. The two long side doors are straightforward as one large piece each. The compact size at 153.5 in (3,900 mm) keeps the job manageable for a careful installer.

How many generations of the Sprint does this page cover?

This page covers one generation of the Alfa Romeo Sprint, the first generation produced from 1983 to 1989. There are no other generations in the catalog for this model. The information here applies to that single hatchback body style.