Wraps by car

Aston Martin Cygnet wrap

The Aston Martin Cygnet wrap page covers the 2011–2013 hatchback, the only generation of this mini car. A full vinyl wrap on this body takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film the estimate is about 49 ft (15 m). The page explains the body, the wrap film, and the jobs smaller than a full wrap.

1generations12.5 mof film for a full wrap

Aston Martin Cygnet, first generation, factory photo
Aston Martin Cygnet, first generation. Factory color shown.

Aston Martin Cygnet wrap colors and ideas

  • Cygnet black wrap
  • Cygnet white wrap
  • Cygnet gray wrap
  • Cygnet silver wrap
  • Cygnet red wrap
  • Cygnet blue wrap
  • Cygnet green wrap
  • Cygnet yellow wrap
  • Cygnet orange wrap
  • Cygnet purple wrap
  • Cygnet pink wrap
  • Cygnet teal wrap
  • Cygnet brown wrap
  • Cygnet gold wrap
  • Cygnet chrome wrap
  • Cygnet color shift wrap
  • Cygnet carbon fiber wrap
  • Cygnet camo and patterned wrap

How much vinyl to wrap an Aston Martin Cygnet

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2013hatchback (3 doors)121.2 in (3,078 mm)about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Cygnet wrap cost factors

The Cygnet wrap cost depends on the size of the car, the film and the work on the panels. The body is 121.2 in (3,078 mm) long, so a mini car like this uses less material than a full-size model. The wrap shop charges for the film, the hours and the preparation of the surfaces. A chrome or patterned film needs more film and more care than a plain color.

  • Film for a full wrap: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Cygnet wraps by generation

Swipe sideways. Tap a card for the full description.

Aston Martin Cygnet, first generation, factory photo
Factory color shown

2011–2013 Cygnet hatchback (first generation)

2011–2013hatchback (3 doors)121.2 in (3,078 mm)

The first-generation Cygnet from 2011–2013 is a short hatchback that can hide old paint under wrap film. On a car of these years panels may be original or repainted, and a test spot comes before a full wrap. The wrap does not fix peeling paint, so the installer checks every panel first. Prep work on a mini car is still the same as on a larger one.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 41 ft (12.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Cygnet

A partial wrap on the Cygnet covers the roof, the hood, or the mirror caps, and leaves the rest of the body in its paint color. A Cygnet chrome delete covers the window trim and the badges with black film. Paint protection film (PPF) is a clear film put on the front end to guard the paint. These jobs use less film than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Aston Martin Cygnet: body, cut-outs and film

The Aston Martin Cygnet vinyl wrap follows the small three-door hatchback body of the car. Its 121.2 in (3,078 mm) length is short, so a wrap uses less film than a larger Aston Martin. The high roof and tall sides are the main surfaces to cover. The tailgate and the two long doors are flat enough for one large piece each.

The Cygnet wrap ideas on this car start with the tailgate, which holds the rear glass and needs the film cut around the edge. The two long side doors are each wrapped as one large piece of film, so the installer has to manage a wide sheet. No other parts on this body require extra cut-outs. The mirrors, trim and badges come off for a clean install.

How much vinyl to wrap a Cygnet is fixed because the catalog lists one generation of the car. The 2011–2013 hatchback body is the only size, so film use does not change between years. A full wrap of this body calls for about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. If the film is chrome or patterned, the figure goes up to about 49 ft (15 m).

Questions about wrapping an Aston Martin Cygnet

How much vinyl does it take to wrap an Aston Martin Cygnet?

A full wrap of an Aston Martin Cygnet takes about 41 ft (12.5 m) of 60-inch (1.52 m) cast film. If the film is chrome or patterned, the number is about 49 ft (15 m). The estimate is for the 2011–2013 hatchback body, the only generation in the catalog.

Can I wrap only the hood or the roof of a Cygnet?

Yes, the roof, the hood, or the mirror caps can be wrapped as a partial job on a Cygnet. A chrome delete covers the window trim and the badges with black film. Paint protection film (PPF) is a clear film put on the front end. These options use less film than a full wrap.

Is a Cygnet hard to wrap?

A Cygnet is not hard to wrap, but its tailgate adds work because the rear glass is in it. The installer cuts the film at the edge of the glass and wraps the metal around it. The two long side doors are each one large piece of film, which takes care to lay down flat. The car is small, so the job is shorter than on a large car.

How many generations of the Cygnet does this page cover?

This page covers one generation of the Aston Martin Cygnet. The first generation was produced from 2011 to 2013 as a three-door hatchback. No other generation of this model is in the catalog.