Wraps by car

Aston Martin Rapide wrap

The Aston Martin Rapide wrap page covers both generations of this four-door luxury liftback, from 2010 to 2018. A full vinyl wrap of the newest body uses about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film on the same car takes about 80 ft (24.5 m). The first generation, from 2010 to 2013, needs slightly less film.

2generations18.5 mof film for a full wrap

Aston Martin Rapide, second generation, factory photo
Aston Martin Rapide, second generation. Factory color shown.

Aston Martin Rapide wrap colors and ideas

  • Rapide black wrap
  • Rapide white wrap
  • Rapide gray wrap
  • Rapide silver wrap
  • Rapide red wrap
  • Rapide blue wrap
  • Rapide green wrap
  • Rapide yellow wrap
  • Rapide orange wrap
  • Rapide purple wrap
  • Rapide pink wrap
  • Rapide teal wrap
  • Rapide brown wrap
  • Rapide gold wrap
  • Rapide chrome wrap
  • Rapide color shift wrap
  • Rapide carbon fiber wrap
  • Rapide camo and patterned wrap

How much vinyl to wrap an Aston Martin Rapide

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–2018liftback (5 doors)197.6 in (5,020 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m)
2010–2013liftback (5 doors)197.6 in (5,019 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Rapide wrap cost factors

The Rapide wrap cost depends on the size of the car, the film chosen, and the amount of cut-out work. A full wrap of the second generation needs about 61 ft (18.5 m) of 60-inch cast film, or about 80 ft (24.5 m) for chrome or patterned film. The first generation needs slightly less film. The installer's time for trimming around parking sensors and the tailgate glass also affects the total.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).
  • Body: liftback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Rapide wraps by generation

Swipe sideways. Tap a card for the full description.

Aston Martin Rapide, second generation, factory photo
Factory color shown

2013–2018 Rapide liftback (second generation)

2013–2018liftback (5 doors)197.6 in (5,020 mm)

The second-generation Aston Martin Rapide, built from 2013 to 2018, has a length of 197.6 in (5,020 mm) and a five-door liftback body. Its large size means a full wrap uses about 61 ft (18.5 m) of 60-inch cast film. The long roof and tailgate are the biggest single panels. The wrap is split into many pieces, including four doors and the tailgate.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Plug-in and electric versions: the charge port door is wrapped as a small piece of its own.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 80 ft (24.5 m).

Aston Martin Rapide, first generation, factory photo
Factory color shown

2010–2013 Rapide liftback (first generation)

2010–2013liftback (5 doors)197.6 in (5,019 mm)

The first-generation Aston Martin Rapide, from 2010 to 2013, is also 197.6 in (5,019 mm) long, but its wrap film amount is slightly less at about 59 ft (18 m). Because these cars are older, the paint may be original or repainted, and a test spot before a full wrap shows how the film will stick to the surface. Panels with older paint may need different preparation. The five-door body style and the tailgate with rear glass are the same as on the second generation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on a Rapide

A partial wrap on the Rapide can cover the roof, hood, or mirror caps, while an Aston Martin Rapide chrome delete changes the window trim and badges to black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use less film and are quicker than a full color change wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Aston Martin Rapide: body, cut-outs and film

The Aston Martin Rapide vinyl wrap is a full-body job on a large five-door liftback with a length of 197.6 in (5,020 mm) on the second generation and 197.6 in (5,019 mm) on the first. The long roof and tailgate add film area compared with smaller sedans. The four doors and the liftgate mean more panels to wrap, so the installer works with several separate pieces of film. The wrap covers the entire exterior, but the glass areas are not wrapped.

Rapide wrap ideas include cut-outs for parking sensors, which are present on every trim of both generations. The film is cut around each sensor in the bumpers, so the sensors keep working normally. The tailgate has the rear glass in it, and the film ends at the edge of the glass. On the second generation, the charge port door on plug-in and electric versions is wrapped as a small piece of its own.

To know how much vinyl to wrap a Rapide, compare the two generations: the second-generation body from 2013 to 2018 uses about 61 ft (18.5 m) of cast film, while the first-generation body from 2010 to 2013 uses about 59 ft (18 m). For chrome or patterned film, the second generation takes about 80 ft (24.5 m) and the first about 74 ft (22.5 m). The difference comes from slightly changed panel shapes, not from overall length. The body style stays the same across both generations.

Questions about wrapping an Aston Martin Rapide

How much vinyl does it take to wrap an Aston Martin Rapide?

An Aston Martin Rapide needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for the newest body, which is the second generation from 2013 to 2018. For chrome or patterned film, the same car takes about 80 ft (24.5 m). The first generation from 2010 to 2013 uses about 59 ft (18 m) of cast film, or about 74 ft (22.5 m) for chrome or patterned film.

Can I wrap only the hood or the roof of a Rapide?

Yes, you can wrap only the hood or the roof of a Rapide. A partial wrap can cover the roof, hood, or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film is another option for the front end.

Is a Rapide hard to wrap?

A Rapide is not especially hard to wrap, but its size and some details add work. The car is 197.6 in (5,020 mm) long on the second generation, so the film pieces are large. Parking sensors on every trim require cut-outs in the bumper film. The tailgate has rear glass set into it, so the film must end cleanly at the glass edge.

How many generations of the Rapide does this page cover?

This page covers two generations of the Aston Martin Rapide. The second generation was built from 2013 to 2018, and the first generation was built from 2010 to 2013.