Wraps by car

Aston Martin V12 Zagato wrap

The Aston Martin V12 Zagato wrap page covers the first generation of this limited sports car, produced from 2011 to 2012. A full vinyl wrap on a V12 Zagato takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, plan for about 54 ft (16.5 m).

1generations14.5 mof film for a full wrap

Aston Martin V12 Zagato, first generation, factory photo
Aston Martin V12 Zagato, first generation. Factory color shown.

Aston Martin V12 Zagato wrap colors and ideas

  • V12 Zagato black wrap
  • V12 Zagato white wrap
  • V12 Zagato gray wrap
  • V12 Zagato silver wrap
  • V12 Zagato red wrap
  • V12 Zagato blue wrap
  • V12 Zagato green wrap
  • V12 Zagato yellow wrap
  • V12 Zagato orange wrap
  • V12 Zagato purple wrap
  • V12 Zagato pink wrap
  • V12 Zagato teal wrap
  • V12 Zagato brown wrap
  • V12 Zagato gold wrap
  • V12 Zagato chrome wrap
  • V12 Zagato color shift wrap
  • V12 Zagato carbon fiber wrap
  • V12 Zagato camo and patterned wrap

How much vinyl to wrap an Aston Martin V12 Zagato

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2012coupe (2 doors)172.6 in (4,385 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

V12 Zagato wrap cost factors

V12 Zagato wrap cost depends on the film type, the condition of the paint, and the amount of disassembly needed. A car from 2011–2012 may have original or repainted panels, so a test spot before the full wrap adds a step. The two long doors are each one large piece, which can increase labor time for a flawless finish. The size of the car, 172.6 in (4,385 mm), also affects how much film is used.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

V12 Zagato wraps by generation

Swipe sideways. Tap a card for the full description.

Aston Martin V12 Zagato, first generation, factory photo
Factory color shown

2011–2012 V12 Zagato coupe (first generation)

2011–2012coupe (2 doors)172.6 in (4,385 mm)

The first-generation Aston Martin V12 Zagato was built from 2011 to 2012 as a two-door coupe, and its paint condition can vary after more than a decade. Some panels may be original while others have been repainted, so a test spot on a small area is the safe way to check adhesion before a full wrap. If the paint is weak or lifting, the wrap installer may need to do more preparation before laying film.

Two long side doors: each door is one large piece of film.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a V12 Zagato

A partial wrap on an Aston Martin V12 Zagato can cover the roof, hood, or mirror caps, and a chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is another option: a clear film applied to the front end to guard against stone chips. These smaller jobs use less film than a full wrap and can be done in stages.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Aston Martin V12 Zagato: body, cut-outs and film

The Aston Martin V12 Zagato vinyl wrap is shaped by the coupe body and its two long side doors. The car measures 172.6 in (4,385 mm) in overall length, and each door is one large piece of film. The roof flows into the rear haunches, so the installer works with long, continuous panels instead of many small pieces.

V12 Zagato wrap ideas start with the two long side doors, which are each wrapped as one large piece of film. A clean install requires the mirrors, door handles, and badges to be removed or worked around carefully. The double-bubble roof and the front grille surround are areas that need precise trimming and heat forming.

How much vinyl to wrap a V12 Zagato depends on which generation you have, but only one generation exists for this model. The 2011–2012 coupe takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for a standard color change. If you choose a chrome or patterned film, the estimate rises to about 54 ft (16.5 m) because pattern matching uses more material.

Questions about wrapping an Aston Martin V12 Zagato

How much vinyl does it take to wrap an Aston Martin V12 Zagato?

It takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film to wrap an Aston Martin V12 Zagato. For chrome or patterned film, the amount rises to about 54 ft (16.5 m) because the pattern must be matched. These numbers are for a full color change wrap on the 2011–2012 coupe.

Can I wrap only the hood or the roof of a V12 Zagato?

Yes, you can wrap only the hood or the roof of a V12 Zagato. A partial wrap on this car often covers the roof, hood, or mirror caps. These smaller sections still need careful work around the double-bubble roof and the front grille.

Is a V12 Zagato hard to wrap?

A V12 Zagato is not the easiest car to wrap because its two long side doors are each one large piece of film. The overall size of 172.6 in (4,385 mm) means the installer handles big panels that need to be laid without wrinkles. The double-bubble roof adds extra shaping time with heat.

How many generations of the V12 Zagato does this page cover?

This page covers one generation of the V12 Zagato. The Aston Martin V12 Zagato was produced only from 2011 to 2012 as a coupe. All information here refers to that first and only generation.