Wraps by car

Aston Martin DB AR1 wrap

The Aston Martin DB AR1 wrap is a full color change for a rare open-top grand tourer. This page covers the first generation produced from 2003 to 2004. A full wrap of the convertible body takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film.

1generations14.5 mof film for a full wrap

Aston Martin DB AR1, first generation, factory photo
Aston Martin DB AR1, first generation. Factory color shown.

Aston Martin DB AR1 wrap colors and ideas

  • DB AR1 black wrap
  • DB AR1 white wrap
  • DB AR1 gray wrap
  • DB AR1 silver wrap
  • DB AR1 red wrap
  • DB AR1 blue wrap
  • DB AR1 green wrap
  • DB AR1 yellow wrap
  • DB AR1 orange wrap
  • DB AR1 purple wrap
  • DB AR1 pink wrap
  • DB AR1 teal wrap
  • DB AR1 brown wrap
  • DB AR1 gold wrap
  • DB AR1 chrome wrap
  • DB AR1 color shift wrap
  • DB AR1 carbon fiber wrap
  • DB AR1 camo and patterned wrap

How much vinyl to wrap an Aston Martin DB AR1

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2003–2004convertible (2 doors)176.4 in (4,481 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m)

DB AR1 wrap cost factors

DB AR1 wrap cost depends on the size of the car, the film choice, and the labor for the convertible body. The length of 176.4 in (4,481 mm) and the two-door layout set the base amount of film. A chrome or patterned film increases the total to about 54 ft (16.5 m). The fabric top adds extra work because the installer must trim the film precisely where it meets the top.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

DB AR1 wraps by generation

Swipe sideways. Tap a card for the full description.

Aston Martin DB AR1, first generation, factory photo
Factory color shown

2003–2004 DB AR1 convertible (first generation)

2003–2004convertible (2 doors)176.4 in (4,481 mm)

The first generation DB AR1 is a two-door convertible from 2003 to 2004. In a wrap, the fabric top is not covered, and the film ends where the top begins. Installers cut the film cleanly along the edge of the top for a neat finish. The wrap follows the body panels only, leaving the top in its original color.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 54 ft (16.5 m).

Roof, hood, chrome delete and PPF on a DB AR1

Partial wrap options for the DB AR1 include the hood, mirror caps, and rear deck. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end of the car. These smaller jobs allow a custom look without a full color change wrap.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Aston Martin DB AR1: body, cut-outs and film

An Aston Martin DB AR1 vinyl wrap is shaped by the convertible body style. The two-door convertible measures 176.4 in (4,481 mm) long, which is a compact footprint for a grand tourer. The fabric top is not wrapped, so film ends where the top begins. Fewer doors and a smaller roof area reduce the amount of film compared to a coupe.

DB AR1 wrap ideas start with the parts that need cut-outs or come off. The door handles, badges, and trim are removed for a clean installation. The front bumper and mirrors are wrapped with separate pieces of film. A chrome delete covers the bright window trim and badges with black film.

How much vinyl to wrap a DB AR1 depends on the generation. The catalog lists only the first generation, produced from 2003 to 2004. For this single body style, the film estimate stays the same across both years. Anyone counting film can plan on about 48 ft (14.5 m) of 60-inch (1.52 m) cast film.

Questions about wrapping an Aston Martin DB AR1

How much vinyl does it take to wrap an Aston Martin DB AR1?

A full wrap of an Aston Martin DB AR1 takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film. The estimate is for the first generation convertible from 2003 to 2004. If you choose chrome or patterned film, plan for about 54 ft (16.5 m).

Is the top of a DB AR1 wrapped?

No, the fabric top of a DB AR1 is not wrapped. The film ends where the top begins, so only the body panels are covered. A folding hard top, if fitted, would be wrapped as separate panels.

Can I wrap only the hood or the roof of a DB AR1?

Yes, you can wrap only the hood or the rear deck of a DB AR1. A partial wrap also includes the mirror caps as an option. The roof of this convertible is a fabric top, so it is not wrapped.

Is a DB AR1 hard to wrap?

A DB AR1 is not the easiest car to wrap because of the convertible body. The fabric top must be avoided, so installers trim the film carefully along its edge. The car is 176.4 in (4,481 mm) long, which is not excessive, but the curves of the body add work. Door handles, badges, and trim are removed for a clean finish.