Wraps by car

Aston Martin Virage wrap

The Aston Martin Virage wrap page covers both generations of this sports car. A vinyl wrap on the second generation takes about 49 ft (15 m) for the convertible to 52 ft (16 m) for the coupe with 60-inch (1.52 m) cast film. The first generation ranges from about 49 ft (15 m) for the convertible to 61 ft (18.5 m) for the wagon. The newest body is the second generation from 2011–2012.

2generations15 mof film for a full wrap

Aston Martin Virage, second generation, factory photo
Aston Martin Virage, second generation. Factory color shown.

Aston Martin Virage wrap colors and ideas

  • Virage black wrap
  • Virage white wrap
  • Virage gray wrap
  • Virage silver wrap
  • Virage red wrap
  • Virage blue wrap
  • Virage green wrap
  • Virage yellow wrap
  • Virage orange wrap
  • Virage purple wrap
  • Virage pink wrap
  • Virage teal wrap
  • Virage brown wrap
  • Virage gold wrap
  • Virage chrome wrap
  • Virage color shift wrap
  • Virage carbon fiber wrap
  • Virage camo and patterned wrap

How much vinyl to wrap an Aston Martin Virage

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2012convertible, coupe (2 doors)185.8 in (4,720 mm)about 49 ft (15 m) for the convertible to 52 ft (16 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m)
1988–2000convertible, coupe, sedan, wagon (2 or 3 or 4 doors)186.5 in (4,737 mm) to 198.3 in (5,037 mm)about 49 ft (15 m) for the convertible to 61 ft (18.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m)

Virage wrap cost factors

Virage wrap cost depends on the size of the body and the film type. The first generation wagon at 198.3 in (5,037 mm) long takes more material than the second generation convertible at 185.8 in (4,720 mm). Chrome or patterned film adds up to 77 ft (23.5 m) on the first generation, while standard cast film on the second generation is about 49-52 ft (15-16 m). Installation time also changes with the number of sensors and body panels.

  • Film for a full wrap: about 49 ft (15 m) for the convertible to 52 ft (16 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Virage wraps by generation

Swipe sideways. Tap a card for the full description.

Aston Martin Virage, second generation, factory photo
Factory color shown

2011–2012 Virage convertible, coupe (second generation)

2011–2012convertible, coupe (2 doors)185.8 in (4,720 mm)

The open top of the 2011–2012 Aston Martin Virage is left unwrapped. The film ends where the fabric top begins, so the wrap stops at the base of the roof. A folding hard top, if present, is wrapped as its own panels. This keeps the top functional and the wrap edge clean.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Film: about 49 ft (15 m) for the convertible to 52 ft (16 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 59 ft (18 m).

Aston Martin Virage, first generation, factory photo
Factory color shown

1988–2000 Virage convertible, coupe, sedan, wagon (first generation)

1988–2000convertible, coupe, sedan, wagon (2 or 3 or 4 doors)186.5 in (4,737 mm) to 198.3 in (5,037 mm)

Paint age matters on a first generation Aston Martin Virage from 1988–2000. Panels may be original or repainted, so a test spot is done before a full wrap. That test checks how the film adheres to the paint. The installer can then decide if any panel needs more preparation.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) for the convertible to 61 ft (18.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on a Virage

The Aston Martin Virage can get a partial wrap on the roof, hood, or mirror caps. A Virage chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film on the front end to guard against stone chips. These jobs use less film and cost less than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Aston Martin Virage: body, cut-outs and film

An Aston Martin Virage vinyl wrap changes with body style and size. The second generation offers convertible and coupe bodies at 185.8 in (4,720 mm) long. The first generation includes convertible, coupe, sedan, and wagon from 186.5 in (4,737 mm) to 198.3 in (5,037 mm) long. Longer bodies and more panels mean more film and more labor.

Virage wrap ideas must account for parts that need cut-outs. Every trim of the second generation has parking sensors in the bumpers, so the film is cut around each sensor. Convertible bodies have a fabric top that is not wrapped, and the film ends where the top begins. Two long side doors on the second generation are each wrapped as one large piece of film.

How much vinyl to wrap a Virage depends on the generation and body style. The second generation coupe takes up to 52 ft (16 m) of 60-inch (1.52 m) cast film, while the first generation wagon takes up to 61 ft (18.5 m). If you choose chrome or patterned film, the second generation may need up to 59 ft (18 m) and the first generation up to 77 ft (23.5 m). The convertible bodies use the least film at about 49 ft (15 m).

Questions about wrapping an Aston Martin Virage

How much vinyl does it take to wrap an Aston Martin Virage?

About 49 ft (15 m) for the convertible to 52 ft (16 m) for the coupe of the newest Aston Martin Virage. The second generation body uses these amounts with 60-inch (1.52 m) cast film. Chrome or patterned film may need up to 59 ft (18 m). The exact amount depends on the body style.

Is the top of a Virage wrapped?

No, the fabric top of a Virage convertible is not wrapped. The film ends where the fabric top begins. A folding hard top, if fitted, is wrapped as panels of its own. This applies to both generations.

Which Virage body takes more film?

The first generation wagon takes more film, up to 61 ft (18.5 m) of cast film. The second generation coupe takes up to 52 ft (16 m), and the convertibles of both generations take about 49 ft (15 m). With chrome or patterned film, the first generation wagon can take up to 77 ft (23.5 m). Body length and extra panels like a tailgate increase the amount.

Can I wrap only the hood or the roof of a Virage?

Yes, you can wrap only the hood or the roof of a Virage. A partial wrap can cover the roof, hood, or mirror caps. The film is cut to fit each panel and edges are wrapped where possible. This is a smaller job than a full vinyl wrap.