Wraps by car

Aston Martin One-77 wrap

This page covers the Aston Martin One-77 wrap, a single-generation sports car produced from 2009 to 2012. The coupe body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full vinyl wrap. Chrome or patterned film requires about 59 ft (18 m).

1generations15.5 mof film for a full wrap

Aston Martin One-77, first generation, factory photo
Aston Martin One-77, first generation. Factory color shown.

Aston Martin One-77 wrap colors and ideas

  • Aston Martin One-77 black wrap
  • Aston Martin One-77 white wrap
  • Aston Martin One-77 gray wrap
  • Aston Martin One-77 silver wrap
  • Aston Martin One-77 red wrap
  • Aston Martin One-77 blue wrap
  • Aston Martin One-77 green wrap
  • Aston Martin One-77 yellow wrap
  • Aston Martin One-77 orange wrap
  • Aston Martin One-77 purple wrap
  • Aston Martin One-77 pink wrap
  • Aston Martin One-77 teal wrap
  • Aston Martin One-77 brown wrap
  • Aston Martin One-77 gold wrap
  • Aston Martin One-77 chrome wrap
  • Aston Martin One-77 color shift wrap
  • Aston Martin One-77 carbon fiber wrap
  • Aston Martin One-77 camo and patterned wrap

How much vinyl to wrap an Aston Martin One-77

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2009–2012coupe (2 doors)181.1 in (4,601 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Aston Martin One-77 wrap cost factors

Aston Martin One-77 wrap cost depends on the film used and the coverage, not on a fixed price. A full wrap needs about 51 ft (15.5 m) of 60-inch cast film, while chrome or patterned film needs about 59 ft (18 m). The two long doors take large pieces that add labor time. Paint age and any repainted panels may require extra preparation before wrapping.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Aston Martin One-77 wraps by generation

Swipe sideways. Tap a card for the full description.

Aston Martin One-77, first generation, factory photo
Factory color shown

2009–2012 Aston Martin One-77 coupe (first generation)

2009–2012coupe (2 doors)181.1 in (4,601 mm)

The first generation Aston Martin One-77 from 2009 to 2012 has coupe styling with two doors. Paint age matters on these cars because panels may be original or repainted. A test spot on the surface comes before a full wrap. This checks film adhesion on older finishes.

Two long side doors: each door is one large piece of film.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on an Aston Martin One-77

The Aston Martin One-77 chrome delete covers window trim and badges with black film for a subtle change. A partial wrap can include the roof, hood, and mirror caps instead of the whole car. Paint protection film (PPF) as clear film on the front end guards against stone chips. These jobs use less film than a full wrap and can be done separately.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Aston Martin One-77: body, cut-outs and film

The Aston Martin One-77 vinyl wrap is influenced by its coupe body style and 181.1 in (4,601 mm) length. The single body style with two long doors means a full wrap uses large sheets of film. Installers can plan a simpler layout because there are no additional roof or bumper options. The size places it in the expected range for large sports cars.

Aston Martin One-77 wrap ideas often focus on the two long side doors, each covered by one large piece of film. These doors require careful handling to avoid creases and air pockets. The rest of the body is wrapped with standard techniques. A chrome delete on window trim and badges is a smaller complementary job.

How much vinyl to wrap an Aston Martin One-77 depends on the film type, but the production run has one generation from 2009 to 2012. Film usage stays at about 51 ft (15.5 m) of 60-inch cast film for every year. Patterned or chrome film raises the figure to about 59 ft (18 m). There are no body revisions that change the estimate.

Questions about wrapping an Aston Martin One-77

How much vinyl does it take to wrap an Aston Martin One-77?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film to wrap an Aston Martin One-77. This figure is for the full coupe body using standard film. Chrome or patterned film increases the amount to about 59 ft (18 m).

Can I wrap only the hood or the roof of an Aston Martin One-77?

Yes, you can wrap only the hood or the roof of an Aston Martin One-77. These are part of a partial wrap that also includes mirror caps. A chrome delete on window trim and badges is another targeted option. Paint protection film can be applied to the front end alone.

Is an Aston Martin One-77 hard to wrap?

An Aston Martin One-77 is not especially hard to wrap, but the two long side doors add work. Each door is one large piece of film, which requires careful handling. The overall length of 181.1 in (4,601 mm) means generous working space. Paint age on these 2009–2012 cars may need a test spot first.

How many generations of the Aston Martin One-77 does this page cover?

This page covers one generation of the Aston Martin One-77. The model was produced as a single generation from 2009 to 2012. There are no other generations in the catalog.