Wraps by car

Aston Martin DBX wrap

The Aston Martin DBX wrap page covers this five-door SUV from its 2019 launch to today, one generation in the catalog. A full vinyl wrap of the newest body takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film. If you choose chrome or patterned film, plan for about 66 ft (20 m).

1generations17.5 mof film for a full wrap

Aston Martin DBX, first generation, factory photo
Aston Martin DBX, first generation. Factory color shown.

Aston Martin DBX wrap colors and ideas

  • Aston Martin DBX black wrap
  • Aston Martin DBX white wrap
  • Aston Martin DBX gray wrap
  • Aston Martin DBX silver wrap
  • Aston Martin DBX red wrap
  • Aston Martin DBX blue wrap
  • Aston Martin DBX green wrap
  • Aston Martin DBX yellow wrap
  • Aston Martin DBX orange wrap
  • Aston Martin DBX purple wrap
  • Aston Martin DBX pink wrap
  • Aston Martin DBX teal wrap
  • Aston Martin DBX brown wrap
  • Aston Martin DBX gold wrap
  • Aston Martin DBX chrome wrap
  • Aston Martin DBX color shift wrap
  • Aston Martin DBX carbon fiber wrap
  • Aston Martin DBX camo and patterned wrap

How much vinyl to wrap an Aston Martin DBX

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2019–nowSUV (5 doors)198.4 in (5,039 mm)about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m)

Aston Martin DBX wrap cost factors

An Aston Martin DBX wrap cost depends on the film amount and the labor of the installer. A full color change uses about 57 ft (17.5 m) of 60-inch cast film, and chrome or patterned film needs about 66 ft (20 m). Cutting around sensors, cameras, roof rails and the glass roof adds time, so the final cost rises with the number of cut-outs and removed parts.

  • Film for a full wrap: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Restyled in 2024: bumpers and lights differ between the versions, and so do the film cuts.

Aston Martin DBX wraps by generation

Swipe sideways. Tap a card for the full description.

Aston Martin DBX, first generation, factory photo
Factory color shown

2019–now Aston Martin DBX SUV (first generation)

2019–nowSUV (5 doors)198.4 in (5,039 mm)

The first generation Aston Martin DBX has a glass roof that is not wrapped, so the roof stays dark whatever the color of the film. The roof rails sit above the roof line and are removed or cut around before the roof panel can be wrapped. The tailgate glass forms the rear edge of the wrap on the liftgate.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Film: about 57 ft (17.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 66 ft (20 m).

Roof, hood, chrome delete and PPF on an Aston Martin DBX

An Aston Martin DBX chrome delete covers the window trim and badges with black film, leaving the body panels untouched. A partial wrap on this SUV can cover the hood, mirror caps and tailgate without wrapping the doors or roof. Clear paint protection film (PPF) is also an option for the front end only.

  • Partial wrap: hood, mirror caps, tailgate.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Aston Martin DBX: body, cut-outs and film

An Aston Martin DBX vinyl wrap is shaped by the SUV's single body style with five doors and a length of 198.4 in (5,039 mm). The tall sides and large bumper areas call for wide 60-inch (1.52 m) film to avoid extra seams. The tailgate with rear glass lets the film end cleanly at the edge of the glass.

Aston Martin DBX wrap ideas must account for every trim's panoramic glass roof, which is not wrapped, so the film ends at the roof rails. The roof rails themselves come off before wrapping the roof, or the film is cut along them. Parking sensors in the bumpers and cameras in the body each need a cut-out in the film around the sensor or lens.

How much vinyl to wrap an Aston Martin DBX depends on the body years. The first generation runs from 2019 to now and gets a restyle in 2024. The 2024 update can change the size of bumper and trim pieces, so a wrapper counts film per car and checks the 2024 body before cutting.

Questions about wrapping an Aston Martin DBX

How much vinyl does it take to wrap an Aston Martin DBX?

It takes about 57 ft (17.5 m) of 60-inch (1.52 m) cast film to wrap an Aston Martin DBX in a standard color. If you use chrome or patterned film, allow about 66 ft (20 m).

Can the roof of an Aston Martin DBX be wrapped?

No, the roof of an Aston Martin DBX cannot be wrapped because every trim has a panoramic glass roof. The glass is not covered with vinyl, and the film ends at the roof rails.

Which years of the Aston Martin DBX take the same film cuts?

All Aston Martin DBX years from 2019 to now take the same core film cuts, with a restyle in 2024 that may change some bumper or trim pieces. A wrapper checks the 2024 body against earlier examples before cutting film for a specific car.

Can I wrap only the hood or the roof of an Aston Martin DBX?

Yes, you can wrap only the hood or the roof of an Aston Martin DBX, but the roof is glass and cannot be covered. A partial wrap often covers the hood, mirror caps and tailgate, while the roof stays dark from the factory glass. Paint protection film (PPF) on the front end is another way to protect only part of the car.