Wraps by car

Aston Martin Vulcan wrap

The Aston Martin Vulcan wrap is a full vinyl wrap for a low, track-focused coupe built in one generation from 2015 to 2016. The newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film for a standard color change. A chrome or patterned film needs about 61 ft (18.5 m) of the same material.

1generations16.5 mof film for a full wrap

Aston Martin Vulcan, first generation, factory photo
Aston Martin Vulcan, first generation. Factory color shown.

Aston Martin Vulcan wrap colors and ideas

  • Vulcan black wrap
  • Vulcan white wrap
  • Vulcan gray wrap
  • Vulcan silver wrap
  • Vulcan red wrap
  • Vulcan blue wrap
  • Vulcan green wrap
  • Vulcan yellow wrap
  • Vulcan orange wrap
  • Vulcan purple wrap
  • Vulcan pink wrap
  • Vulcan teal wrap
  • Vulcan brown wrap
  • Vulcan gold wrap
  • Vulcan chrome wrap
  • Vulcan color shift wrap
  • Vulcan carbon fiber wrap
  • Vulcan camo and patterned wrap

How much vinyl to wrap an Aston Martin Vulcan

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2015–2016coupe (2 doors)189.3 in (4,807 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Vulcan wrap cost factors

Vulcan wrap cost depends on the size of the car, the film chosen, and the labor needed for the two large door panels. The full wrap takes about 54 ft (16.5 m) of cast film, while chrome or patterned film takes about 61 ft (18.5 m). The low body and long doors add time for careful positioning and trimming.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Vulcan wraps by generation

Swipe sideways. Tap a card for the full description.

Aston Martin Vulcan, first generation, factory photo
Factory color shown

2015–2016 Vulcan coupe (first generation)

2015–2016coupe (2 doors)189.3 in (4,807 mm)

The first generation Aston Martin Vulcan is a two-door coupe produced from 2015 to 2016. It measures 189.3 in (4,807 mm) long, which means a wrap installer can use fewer, larger film sheets. The two long side doors are each wrapped as one large piece, reducing the number of separate panels to cut.

Two long side doors: each door is one large piece of film.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Vulcan

A partial wrap on a Vulcan can cover the roof, hood, or mirror caps if you want to change only part of the body. Vulcan chrome delete means covering the window trim and badges with black film for a darker look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips on track days.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Aston Martin Vulcan: body, cut-outs and film

An Aston Martin Vulcan vinyl wrap covers a long, low coupe body that is 189.3 in (4,807 mm) long. The size and smooth, flowing surfaces mean installers can use large panels with fewer visible seams. The two doors are long side pieces that are each wrapped as one large sheet of film.

Vulcan wrap ideas often start with the simple body shape, which has no complex grille or many trim pieces to remove. The wrap installer will cut out openings for lights, vents, and the fuel filler. The side mirrors and badges may come off for a cleaner edge and are then reinstalled.

To know how much vinyl to wrap a Vulcan, you only need to know one generation, since the car existed for two years with no major body changes. The coupe body style and the same dimensions across all cars mean the film estimate stays constant. A wrap shop can measure the car once and use the same panel sizes for every Vulcan.

Questions about wrapping an Aston Martin Vulcan

How much vinyl does it take to wrap an Aston Martin Vulcan?

It takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film to wrap an Aston Martin Vulcan in a standard color change film. If you choose chrome or patterned film, the estimate is about 61 ft (18.5 m). These figures cover the full body of the only generation built from 2015 to 2016.

Can I wrap only the hood or the roof of a Vulcan?

Yes, you can wrap only the hood or the roof of a Vulcan as a partial wrap. Mirror caps are another small area that can be covered separately. A partial wrap uses less film than a full wrap and is a way to change one part of the car.

Is a Vulcan hard to wrap?

Yes, a Vulcan is somewhat hard to wrap because of its long, low body and the two large door panels that each need one big sheet of film. The car is 189.3 in (4,807 mm) long, so careful positioning and trimming take more time. Installers also need to cut out openings for lights and vents without leaving gaps.

How many generations of the Vulcan does this page cover?

This page covers one generation of the Aston Martin Vulcan. The car was produced from 2015 to 2016 with no major body changes, so the film estimates are the same for all cars.