Wraps by car

Aston Martin DB7 wrap

The Aston Martin DB7 wrap page covers the first generation sports car built from 1994 to 2003. A full vinyl wrap of a DB7 takes about 43 ft (13 m) of 60-inch (1.52 m) cast film for the convertible body and about 51 ft (15.5 m) for the coupe. The catalog shows the car in both convertible and coupe body styles with two doors.

1generations13 mof film for a full wrap

Aston Martin DB7, first generation, factory photo
Aston Martin DB7, first generation. Factory color shown.

Aston Martin DB7 wrap colors and ideas

  • Aston Martin DB7 black wrap
  • Aston Martin DB7 white wrap
  • Aston Martin DB7 gray wrap
  • Aston Martin DB7 silver wrap
  • Aston Martin DB7 red wrap
  • Aston Martin DB7 blue wrap
  • Aston Martin DB7 green wrap
  • Aston Martin DB7 yellow wrap
  • Aston Martin DB7 orange wrap
  • Aston Martin DB7 purple wrap
  • Aston Martin DB7 pink wrap
  • Aston Martin DB7 teal wrap
  • Aston Martin DB7 brown wrap
  • Aston Martin DB7 gold wrap
  • Aston Martin DB7 chrome wrap
  • Aston Martin DB7 color shift wrap
  • Aston Martin DB7 carbon fiber wrap
  • Aston Martin DB7 camo and patterned wrap

How much vinyl to wrap an Aston Martin DB7

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1994–2003convertible, coupe (2 doors)182.9 in (4,645 mm) to 183.8 in (4,668 mm)about 43 ft (13 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)

Aston Martin DB7 wrap cost factors

Aston Martin DB7 wrap cost depends on the body style, because the coupe needs about 51 ft (15.5 m) of film while the convertible needs about 43 ft (13 m). The type of film also changes the cost, since chrome or patterned film can take up to about 57 ft (17.5 m) on this car. The shape of the DB7 adds labor time, with its long hood and two large doors requiring careful installation. Extra work like a chrome delete or paint protection film also affects the total.

  • Film for a full wrap: about 43 ft (13 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).
  • Body: convertible, coupe (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.
  • Two long side doors: each door is one large piece of film.
  • Restyled in 1999: bumpers and lights differ between the versions, and so do the film cuts.

Aston Martin DB7 wraps by generation

Swipe sideways. Tap a card for the full description.

Aston Martin DB7, first generation, factory photo
Factory color shown

1994–2003 Aston Martin DB7 convertible, coupe (first generation)

1994–2003convertible, coupe (2 doors)182.9 in (4,645 mm) to 183.8 in (4,668 mm)

The first generation Aston Martin DB7 convertible has a fabric top that is not wrapped, and the vinyl wrap ends where the fabric top begins. Installers run the film to the edge of the top well and trim it cleanly around the base of the soft top. If the car has a folding hard top instead of fabric, that hard top is wrapped as panels of its own, but the DB7 catalog shows a fabric convertible.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Two long side doors: each door is one large piece of film.

Film: about 43 ft (13 m) for the convertible to 51 ft (15.5 m) for the coupe, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on an Aston Martin DB7

An Aston Martin DB7 chrome delete covers the window trim and badges with black film, leaving the paint color unchanged. A partial wrap on a DB7 can include the roof, hood, or mirror caps as individual pieces. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips without changing the color. These smaller jobs use less film than a full wrap and can be matched to the car's lines.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Aston Martin DB7: body, cut-outs and film

An Aston Martin DB7 vinyl wrap follows the long body of either style, which measures from 182.9 in (4,645 mm) to 183.8 in (4,668 mm). The coupe needs more film because its roof is a fixed metal panel, while the convertible has a fabric top that is not wrapped. Each two-door body has two long side doors that are each wrapped as one large piece of film. The 60-inch (1.52 m) film width suits the DB7 panels without excessive waste.

Aston Martin DB7 wrap ideas start with the long hood and front bumper, which need careful fitting around the grille and headlights. The door handles, side mirrors, and badges are removed or cut out for a clean finish. On the convertible body the film ends where the fabric top begins, so there is no wrap material on the soft top itself. The rear bumper and trunk lid are wrapped as separate panels.

To figure out how much vinyl to wrap an Aston Martin DB7, note that only one generation exists in the catalog, built from 1994 to 2003 with a restyle in 1999. The restyle did not change the body dimensions or panel shapes enough to alter the film estimate. The film estimate stays at about 43 ft (13 m) for the convertible and about 51 ft (15.5 m) for the coupe. The overall length listed is from 182.9 in (4,645 mm) to 183.8 in (4,668 mm), so the differences are small.

Questions about wrapping an Aston Martin DB7

How much vinyl does it take to wrap an Aston Martin DB7?

A full wrap of an Aston Martin DB7 takes about 43 ft (13 m) of film for the convertible to 51 ft (15.5 m) for the coupe, using 60-inch (1.52 m) cast film. The figures come from the newest body style in the catalog, which is the only generation of the DB7. The coupe needs more film because its fixed roof is wrapped, while the convertible's fabric top is not.

Is the top of an Aston Martin DB7 wrapped?

No, the fabric top of an Aston Martin DB7 convertible is not wrapped. The vinyl wrap ends where the fabric top begins, so the soft top keeps its original material. If a DB7 has a folding hard top, that top would be wrapped as panels of its own, but the catalog lists a fabric convertible.

Which years of the Aston Martin DB7 take the same film cuts?

All years of the Aston Martin DB7, from 1994 to 2003, take the same film cuts. The car was restyled in 1999, but the restyle did not change the body dimensions or panel shapes in a way that affects the film patterns. The catalog has one generation, so the film estimate applies to every production year.

Which Aston Martin DB7 body takes more film?

The coupe body of the Aston Martin DB7 takes more film than the convertible. The coupe needs about 51 ft (15.5 m) of 60-inch (1.52 m) film, while the convertible needs about 43 ft (13 m). The difference is the metal roof on the coupe, which is wrapped, whereas the convertible's fabric top is not wrapped.