Wraps by car

Fiat 124 Sport Spider wrap

This page covers the Fiat 124 Sport Spider wrap for the single generation built from 1966 to 1981. A full vinyl wrap of the convertible body uses about 36 ft (11 m) of 60-inch (1.52 m) cast film. For chrome or patterned film the estimate rises to about 48 ft (14.5 m). The car is a two-door convertible with a length of 156.3 in (3,970 mm).

1generations11 mof film for a full wrap

Fiat 124 Sport Spider, first generation, factory photo
Fiat 124 Sport Spider, first generation. Factory color shown.

Fiat 124 Sport Spider wrap colors and ideas

  • Fiat 124 Sport Spider black wrap
  • Fiat 124 Sport Spider white wrap
  • Fiat 124 Sport Spider gray wrap
  • Fiat 124 Sport Spider silver wrap
  • Fiat 124 Sport Spider red wrap
  • Fiat 124 Sport Spider blue wrap
  • Fiat 124 Sport Spider green wrap
  • Fiat 124 Sport Spider yellow wrap
  • Fiat 124 Sport Spider orange wrap
  • Fiat 124 Sport Spider purple wrap
  • Fiat 124 Sport Spider pink wrap
  • Fiat 124 Sport Spider teal wrap
  • Fiat 124 Sport Spider brown wrap
  • Fiat 124 Sport Spider gold wrap
  • Fiat 124 Sport Spider chrome wrap
  • Fiat 124 Sport Spider color shift wrap
  • Fiat 124 Sport Spider carbon fiber wrap
  • Fiat 124 Sport Spider camo and patterned wrap

How much vinyl to wrap a Fiat 124 Sport Spider

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1966–1981convertible (2 doors)156.3 in (3,970 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m)

Fiat 124 Sport Spider wrap cost factors

The Fiat 124 Sport Spider wrap cost depends on the film type, the size of the car, and the amount of disassembly. The car is 156.3 in (3,970 mm) long, which is compact but has a long hood and a large rear deck. A standard color change uses about 36 ft (11 m) of film, while chrome or patterned film needs about 48 ft (14.5 m). The convertible top does not add to the cost because it is not wrapped.

  • Film for a full wrap: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).
  • Body: convertible (2 doors).
  • Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Fiat 124 Sport Spider wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat 124 Sport Spider, first generation, factory photo
Factory color shown

1966–1981 Fiat 124 Sport Spider convertible (first generation)

1966–1981convertible (2 doors)156.3 in (3,970 mm)

The first generation Fiat 124 Sport Spider is a convertible, so the top is not covered with vinyl film. If the car has a fabric top, the film ends where the top begins along the beltline. With a folding hard top, each panel of that top can be wrapped separately. The film never bridges the gap between the body and the open roof.

Convertible body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 48 ft (14.5 m).

Roof, hood, chrome delete and PPF on a Fiat 124 Sport Spider

A partial wrap on a Fiat 124 Sport Spider often covers the hood, mirror caps, and rear deck. A chrome delete uses black film to cover bright trim on the windows and badges. Paint protection film (PPF) is often applied as clear film to the front end only. These jobs use less material than a full vinyl wrap and still change the look of the car.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Fiat 124 Sport Spider: body, cut-outs and film

The Fiat 124 Sport Spider vinyl wrap follows a convertible body that is 156.3 in (3,970 mm) long. This compact sports car body has only two doors and no fixed roof, so there are no door frames or roof pillars to cover. The film estimate is about 36 ft (11 m) of 60-inch (1.52 m) cast film for a standard color change. That accounts for the long hood, the rear deck, and the short side panels.

Fiat 124 Sport Spider wrap ideas start with the convertible top, which is never covered with film. The fabric or folding hard top panels are left as they are, and the vinyl ends at the edge where the roof begins. The bumpers are often removed to wrap behind them and create clean edges. Door handles, mirrors, and emblems are also removed or cut around during the install.

How much vinyl to wrap a Fiat 124 Sport Spider depends mainly on the body style. The first generation was built from 1966 to 1981, and every version is a two-door convertible with nearly the same dimensions. A standard full wrap takes about 36 ft (11 m) of 60-inch (1.52 m) cast film. If you choose a chrome or patterned film, expect to need about 48 ft (14.5 m).

Questions about wrapping a Fiat 124 Sport Spider

How much vinyl does it take to wrap a Fiat 124 Sport Spider?

A full wrap of a Fiat 124 Sport Spider takes about 36 ft (11 m) of 60-inch (1.52 m) cast film. If the wrap uses chrome or patterned film, the amount rises to about 48 ft (14.5 m). This estimate is for the first generation convertible body built from 1966 to 1981.

Is the top of a Fiat 124 Sport Spider wrapped?

No, the top of a Fiat 124 Sport Spider is not wrapped. The car is a convertible, so a fabric top is left uncovered and the film ends where the top begins. A folding hard top can be wrapped as separate panels, but the soft top is never covered.

Can I wrap only the hood or the roof of a Fiat 124 Sport Spider?

Yes, you can wrap only the hood or the rear deck of a Fiat 124 Sport Spider. A partial wrap often includes the hood, mirror caps, and rear deck as separate pieces. This is a common way to change the look without a full vinyl wrap.

Is a Fiat 124 Sport Spider hard to wrap?

A Fiat 124 Sport Spider is not the hardest car to wrap, but it has some specific challenges. The convertible body means the film must end cleanly at the top edge along the beltline. The car is 156.3 in (3,970 mm) long, so the hood and rear deck are large single panels that need careful stretching. The bumpers and trim often need to be removed for a neat finish.