Wraps by car

Fiat 125 wrap

The Fiat 125 wrap page covers the single generation produced from 1967 to 1982. It describes the sedan body and the vinyl wrap needed for a full color change. A full wrap of this four-door sedan takes about 48 ft (14.5 m) of 60-inch cast film.

1generations14.5 mof film for a full wrap

Fiat 125, first generation, factory photo
Fiat 125, first generation. Factory color shown.

Fiat 125 wrap colors and ideas

  • Fiat 125 black wrap
  • Fiat 125 white wrap
  • Fiat 125 gray wrap
  • Fiat 125 silver wrap
  • Fiat 125 red wrap
  • Fiat 125 blue wrap
  • Fiat 125 green wrap
  • Fiat 125 yellow wrap
  • Fiat 125 orange wrap
  • Fiat 125 purple wrap
  • Fiat 125 pink wrap
  • Fiat 125 teal wrap
  • Fiat 125 brown wrap
  • Fiat 125 gold wrap
  • Fiat 125 chrome wrap
  • Fiat 125 color shift wrap
  • Fiat 125 carbon fiber wrap
  • Fiat 125 camo and patterned wrap

How much vinyl to wrap a Fiat 125

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1967–1982sedan (4 doors)166.3 in (4,223 mm)about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Fiat 125 wrap cost factors

Fiat 125 wrap cost depends on the film type, the amount of surface area, and the condition of the original paint. The full body takes about 48 ft (14.5 m) of 60-inch cast film, or about 61 ft (18.5 m) if you use chrome or patterned film. Additional work such as removing trim pieces or repairing paint before wrapping increases the labor involved. Since this car is a single generation built from 1967 to 1982, the cost remains based on the same sedan body.

  • Film for a full wrap: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: sedan (4 doors).

Fiat 125 wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat 125, first generation, factory photo
Factory color shown

1967–1982 Fiat 125 sedan (first generation)

1967–1982sedan (4 doors)166.3 in (4,223 mm)

The first generation Fiat 125 was produced from 1967 to 1982 as a four-door sedan. Paint on a car of these years may be original or repainted, so a test spot comes before a full wrap. Older paint can have uneven adhesion or hidden rust, and the surface must be stable for the film to hold. A professional installer will check the paint condition before wrapping the Fiat 125.

Film: about 48 ft (14.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Fiat 125

For a partial wrap on the Fiat 125, you can cover the roof, hood, or mirror caps instead of the whole car. A chrome delete replaces the bright window trim and badges with black film for a different look. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. Each of these jobs uses less material than a full Fiat 125 wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Fiat 125: body, cut-outs and film

A Fiat 125 vinyl wrap covers this compact four-door sedan, which measures 166.3 in (4,223 mm) long. The straight body lines and four doors make panel wrapping straightforward, while the roof and hood add area beyond the sides. Because there is only one body style, film estimates stay consistent for every car from these years. The modest size means a full wrap uses less film than many larger sedans.

Fiat 125 wrap ideas start with removing door handles, mirrors, trim, and bumpers before film is applied. The window trim and badges are often wrapped separately for a chrome delete. Cut-outs are needed for door handles and locks, so the film fits cleanly around them. Precise trimming around the grille and tail lights keeps the final look tidy.

How much vinyl to wrap a Fiat 125 depends on the film type you choose. A standard color change uses about 48 ft (14.5 m) of 60-inch cast film for the whole car. If you choose chrome or patterned film for the exterior, plan for about 61 ft (18.5 m). Only one generation exists, so these figures do not change between production years.

Questions about wrapping a Fiat 125

How much vinyl does it take to wrap a Fiat 125?

A Fiat 125 takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for a full wrap with standard color change film. If you use chrome or patterned film, plan for about 61 ft (18.5 m) instead. These numbers are based on the four-door sedan body of the first generation.

Can I wrap only the hood or the roof of a Fiat 125?

Yes, you can wrap only the hood or only the roof of a Fiat 125. Partial wrap options include the roof, hood, and mirror caps, or you can do a chrome delete on the window trim and badges. Paint protection film on the front end is another limited-coverage choice. These smaller jobs use less film than a full wrap.

Is a Fiat 125 hard to wrap?

A Fiat 125 is not the easiest car to wrap because of its age and trim. Door handles, mirrors, window trim, and bumpers need to be removed or cut around, which adds time. The 166.3 in (4,223 mm) length means a full wrap requires careful film alignment on every panel. Older paint may also need preparation before the vinyl can be applied.

How many generations of the Fiat 125 does this page cover?

This page covers one generation of the Fiat 125, produced from 1967 to 1982. There is only a four-door sedan in the catalog for this model. No separate body styles or later generations are listed.