Wraps by car

Fiat 126 wrap

The Fiat 126 wrap page covers the first generation of this classic mini car, built from 1972 to 1996. A full vinyl wrap of this one-generation body takes about 34 ft (10.5 m) of 60-inch (1.52 m) cast film. This page explains what the body style means for installation, which parts need extra care, and what smaller wrap jobs you can choose.

1generations10.5 mof film for a full wrap

Fiat 126, first generation, factory photo
Fiat 126, first generation. Factory color shown.

Fiat 126 wrap colors and ideas

  • Fiat 126 black wrap
  • Fiat 126 white wrap
  • Fiat 126 gray wrap
  • Fiat 126 silver wrap
  • Fiat 126 red wrap
  • Fiat 126 blue wrap
  • Fiat 126 green wrap
  • Fiat 126 yellow wrap
  • Fiat 126 orange wrap
  • Fiat 126 purple wrap
  • Fiat 126 pink wrap
  • Fiat 126 teal wrap
  • Fiat 126 brown wrap
  • Fiat 126 gold wrap
  • Fiat 126 chrome wrap
  • Fiat 126 color shift wrap
  • Fiat 126 carbon fiber wrap
  • Fiat 126 camo and patterned wrap

How much vinyl to wrap a Fiat 126

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1972–1996hatchback (3 doors)120.2 in (3,053 mm)about 34 ft (10.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m)

Fiat 126 wrap cost factors

Fiat 126 wrap cost depends on the amount of film, the chosen finish, and the condition of the body. The car is a small three-door hatchback, so a full wrap uses about 34 ft (10.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 44 ft (13.5 m), which adds cost. The installer also needs extra time to trim around the tailgate glass and work on the two large side doors.

  • Film for a full wrap: about 34 ft (10.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Fiat 126 wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat 126, first generation, factory photo
Factory color shown

1972–1996 Fiat 126 hatchback (first generation)

1972–1996hatchback (3 doors)120.2 in (3,053 mm)

The first generation Fiat 126 was produced from 1972 to 1996, so paint age varies a lot between individual cars. Panels may be original or repainted, and a test spot of the vinyl comes before a full wrap on this body. The car has a small three-door hatchback shape that is 120.2 in (3,053 mm) long. A full wrap of this generation needs about 34 ft (10.5 m) of 60-inch (1.52 m) cast film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 34 ft (10.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 44 ft (13.5 m).

Roof, hood, chrome delete and PPF on a Fiat 126

For a Fiat 126, a partial wrap can cover the roof, hood, or mirror caps. Chrome delete means covering the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These jobs use less film and work well on this small three-door body.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Fiat 126: body, cut-outs and film

A Fiat 126 vinyl wrap covers a small three-door hatchback body that is 120.2 in (3,053 mm) long. The short length and flat panels make the car easier to cover than a larger vehicle. The single body style has a tailgate with the rear glass in it, so the film ends at the edge of the glass. The two long side doors are each one large piece of film, which speeds up the work.

Fiat 126 wrap ideas often work with the simple shape of this car. The tailgate with the rear glass in it needs the film trimmed cleanly along the glass edge. The two long side doors are each one large piece of film, so a single sheet can cover each door without seams. For a color change wrap, you can use one solid color and add a roof stripe or side graphics.

To find how much vinyl to wrap a Fiat 126, you only need the first generation body, as this page covers one generation. The car needs about 34 ft (10.5 m) of 60-inch (1.52 m) cast film for a full wrap. If you choose chrome or patterned film, the amount rises to about 44 ft (13.5 m). A partial wrap of the roof, hood, or mirror caps requires much less film.

Questions about wrapping a Fiat 126

How much vinyl does it take to wrap a Fiat 126?

A full wrap of a Fiat 126 takes about 34 ft (10.5 m) of 60-inch (1.52 m) cast film. If the film is chrome or patterned, the amount rises to about 44 ft (13.5 m). These figures are for the first generation body, the only one this page covers.

Can I wrap only the hood or the roof of a Fiat 126?

Yes, you can wrap only the hood or the roof of a Fiat 126. A partial wrap on this car can also cover the mirror caps. You can add a chrome delete on the window trim and badges, or a paint protection film (PPF) on the front end.

Is a Fiat 126 hard to wrap?

A Fiat 126 is not hard to wrap, but the small size and body details add some work. The tailgate has the rear glass in it, so the film must end exactly at the edge of the glass. The two long side doors are each one large piece of film, which needs careful handling to avoid wrinkles. At 120.2 in (3,053 mm) long, the car is quick to cover overall.

How many generations of the Fiat 126 does this page cover?

This page covers one generation of the Fiat 126. The car was built from 1972 to 1996 as a single first generation body. The page does not list any other generations for this model.