Wraps by car

Fiat 127 wrap

The Fiat 127 wrap page covers the first generation of this subcompact car, built from 1971 to 1987. A full vinyl wrap of one takes about 43 ft (13 m) for the hatchback to 44 ft (13.5 m) for the wagon, using 60-inch (1.52 m) cast film. The car was offered as a hatchback and a three-door wagon.

1generations13.5 mof film for a full wrap

Fiat 127, first generation, factory photo
Fiat 127, first generation. Factory color shown.

Fiat 127 wrap colors and ideas

  • Fiat 127 black wrap
  • Fiat 127 white wrap
  • Fiat 127 gray wrap
  • Fiat 127 silver wrap
  • Fiat 127 red wrap
  • Fiat 127 blue wrap
  • Fiat 127 green wrap
  • Fiat 127 yellow wrap
  • Fiat 127 orange wrap
  • Fiat 127 purple wrap
  • Fiat 127 pink wrap
  • Fiat 127 teal wrap
  • Fiat 127 brown wrap
  • Fiat 127 gold wrap
  • Fiat 127 chrome wrap
  • Fiat 127 color shift wrap
  • Fiat 127 carbon fiber wrap
  • Fiat 127 camo and patterned wrap

How much vinyl to wrap a Fiat 127

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1971–1987hatchback, wagon (3 doors)141.5 in (3,594 mm) to 143.7 in (3,650 mm)about 43 ft (13 m) for the hatchback to 44 ft (13.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m)

Fiat 127 wrap cost factors

Fiat 127 wrap cost depends mainly on the body style, the film type and the amount of trim work. The wagon uses about 1 ft (0.3 m) more film than the hatchback, and a chrome or patterned film can take up to about 57 ft (17.5 m). Shop labor also changes with the number of parts that must come off the car.

  • Film for a full wrap: about 43 ft (13 m) for the hatchback to 44 ft (13.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).
  • Body: hatchback, wagon (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.

Fiat 127 wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat 127, first generation, factory photo
Factory color shown

1971–1987 Fiat 127 hatchback, wagon (first generation)

1971–1987hatchback, wagon (3 doors)141.5 in (3,594 mm) to 143.7 in (3,650 mm)

The first generation Fiat 127 was built from 1971 to 1987 and came as a hatchback or a three-door wagon. The body style decides the panel plan and the film amount, since the wagon has a longer roof and different rear side windows. Length ranges from 141.5 in (3,594 mm) to 143.7 in (3,650 mm) across the range.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 43 ft (13 m) for the hatchback to 44 ft (13.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Fiat 127

Partial wrap is an option for the Fiat 127 if you want to cover only the roof, hood or mirror caps. Chrome delete can be done on the window trim and badges, using black film to change the look. Paint protection film (PPF) can be applied as clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Fiat 127: body, cut-outs and film

The Fiat 127 vinyl wrap job is shaped by its small body and long two-door sides. The car measures between 141.5 in (3,594 mm) and 143.7 in (3,650 mm), so each side door becomes one large piece of film. Its short overhangs and flat panels also make the film easier to lay down without excess stretching.

Fiat 127 wrap ideas start with the two main areas that need extra work. The tailgate has rear glass in it, so the film ends at the edge of the glass. The two long side doors are each one large piece, which calls for careful positioning and a second pair of hands.

To know how much vinyl to wrap a Fiat 127, you only need to compare the two body styles. The hatchback takes about 43 ft (13 m) of 60-inch (1.52 m) film, and the wagon takes about 44 ft (13.5 m). If you choose chrome or patterned film, plan for up to about 57 ft (17.5 m).

Questions about wrapping a Fiat 127

How much vinyl does it take to wrap a Fiat 127?

It takes about 43 ft (13 m) of film to wrap a Fiat 127 hatchback and about 44 ft (13.5 m) for the wagon, using 60-inch (1.52 m) cast film. With a chrome or patterned film, plan for up to about 57 ft (17.5 m).

Which Fiat 127 body takes more film?

The Fiat 127 wagon takes more film than the hatchback. The wagon needs about 44 ft (13.5 m) and the hatchback about 43 ft (13 m) of 60-inch (1.52 m) cast film. The difference comes from the wagon's taller and longer rear section.

Can I wrap only the hood or the roof of a Fiat 127?

Yes, you can wrap only the hood or the roof of a Fiat 127. A partial wrap can cover the roof, hood or mirror caps, and it uses less film than a full wrap. This is a good way to change the look without covering the whole car.

Is a Fiat 127 hard to wrap?

A Fiat 127 is not hard to wrap, but its two long side doors and the tailgate glass add work. Each door is one large piece of film that needs careful handling, and the film must be cut around the rear glass. The small size of the car, from 141.5 in (3,594 mm) to 143.7 in (3,650 mm), makes the job quicker overall.