Wraps by car

Fiat 128 wrap

The Fiat 128 wrap page covers the first generation built from 1969 to 1985. This subcompact came as a coupe, sedan, or wagon with two, three, or four doors. A full vinyl wrap of the newest body takes about 41 to 48 feet of 60-inch cast film, depending on the style.

1generations12.5 mof film for a full wrap

Fiat 128, first generation, factory photo
Fiat 128, first generation. Factory color shown.

Fiat 128 wrap colors and ideas

  • Fiat 128 black wrap
  • Fiat 128 white wrap
  • Fiat 128 gray wrap
  • Fiat 128 silver wrap
  • Fiat 128 red wrap
  • Fiat 128 blue wrap
  • Fiat 128 green wrap
  • Fiat 128 yellow wrap
  • Fiat 128 orange wrap
  • Fiat 128 purple wrap
  • Fiat 128 pink wrap
  • Fiat 128 teal wrap
  • Fiat 128 brown wrap
  • Fiat 128 gold wrap
  • Fiat 128 chrome wrap
  • Fiat 128 color shift wrap
  • Fiat 128 carbon fiber wrap
  • Fiat 128 camo and patterned wrap

How much vinyl to wrap a Fiat 128

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1969–1985coupe, sedan, wagon (2 or 3 or 4 doors)151.1 in (3,837 mm) to 152.0 in (3,860 mm)about 41 ft (12.5 m) for the coupe to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m)

Fiat 128 wrap cost factors

Fiat 128 wrap cost depends on the size of the area, the film type, and the amount of labor. A full wrap uses about 41 to 48 feet of 60-inch cast film, and chrome or patterned film can bring that to 61 feet. Disassembly and prep work add time to the job. The condition of the paint also affects how much preparation is needed.

  • Film for a full wrap: about 41 ft (12.5 m) for the coupe to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).
  • Body: coupe, sedan, wagon (2 or 3 or 4 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Fiat 128 wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat 128, first generation, factory photo
Factory color shown

1969–1985 Fiat 128 coupe, sedan, wagon (first generation)

1969–1985coupe, sedan, wagon (2 or 3 or 4 doors)151.1 in (3,837 mm) to 152.0 in (3,860 mm)

The first generation Fiat 128 was built from 1969 to 1985 in coupe, sedan, and wagon styles. The style you own decides the panel plan and the film amount. A coupe has fewer panels and less surface area than a wagon, so it uses less vinyl. The wagon's tall roof and rear hatch add material and working time.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 41 ft (12.5 m) for the coupe to 48 ft (14.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Fiat 128

A partial wrap on a Fiat 128 can cover the roof, hood, or mirror caps. Chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less vinyl than a full wrap and can change the look or protection level.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Fiat 128: body, cut-outs and film

The Fiat 128 vinyl wrap amount depends on body style and dimensions. The wagon is the longest at up to 152.0 inches and needs about 48 feet of film. The coupe is shorter and wraps with roughly 41 feet. The sedan sits between them, so the panel plan changes with the silhouette.

Fiat 128 wrap ideas can focus on specific areas instead of the whole car. The wagon has a tailgate with the rear glass in it, so the film ends at the edge of the glass. Side mirrors and door handles need careful cut-outs for a clean look. You can also wrap the pillars between the windows for a different finish.

How much vinyl to wrap a Fiat 128 depends on the body style you count. The coupe needs about 41 feet of 60-inch cast film, measured at 12.5 meters. The wagon takes about 48 feet, or 14.5 meters, because of its extra panels. If you plan chrome or patterned film, allow up to 61 feet for waste and matching.

Questions about wrapping a Fiat 128

How much vinyl does it take to wrap a Fiat 128?

A full wrap of a Fiat 128 takes about 41 to 48 feet (12.5 to 14.5 m) of 60-inch (1.52 m) cast vinyl film. The lower figure fits the coupe and the higher figure fits the wagon. Chrome or patterned film can require up to 61 feet (18.5 m) because of extra layout work.

Which Fiat 128 body takes more film?

The wagon takes more film than the coupe or sedan of the Fiat 128. The wagon needs about 48 feet (14.5 m) of 60-inch cast vinyl, while the coupe needs about 41 feet (12.5 m). The sedan falls between the two because of its intermediate size.

Can I wrap only the hood or the roof of a Fiat 128?

Yes, you can wrap only the hood or the roof of a Fiat 128. These partial wraps are smaller jobs that use less vinyl than a full wrap. Mirror caps are another option for a quick change. Paint protection film on the front end is also a standalone service.

Is a Fiat 128 hard to wrap?

A Fiat 128 is a manageable wrap, but the wagon tailgate with its rear glass adds work. The film must end neatly at the edge of the glass, which takes precise trimming. The subcompact size means fewer large flat panels than a bigger car, so curves need more stretching. Proper cleaning and prep are still required for good adhesion.