Wraps by car

Fiat 130 wrap

The Fiat 130 wrap covers the one generation of this mid-size car produced from 1969 to 1978. A full vinyl wrap of the coupe body takes about 56 ft (17 m) of 60-inch cast film, while the sedan uses roughly 57 ft (17.5 m). The wrap film amount changes little between the coupe and the sedan.

1generations17 mof film for a full wrap

Fiat 130, first generation, factory photo
Fiat 130, first generation. Factory color shown.

Fiat 130 wrap colors and ideas

  • Fiat 130 black wrap
  • Fiat 130 white wrap
  • Fiat 130 gray wrap
  • Fiat 130 silver wrap
  • Fiat 130 red wrap
  • Fiat 130 blue wrap
  • Fiat 130 green wrap
  • Fiat 130 yellow wrap
  • Fiat 130 orange wrap
  • Fiat 130 purple wrap
  • Fiat 130 pink wrap
  • Fiat 130 teal wrap
  • Fiat 130 brown wrap
  • Fiat 130 gold wrap
  • Fiat 130 chrome wrap
  • Fiat 130 color shift wrap
  • Fiat 130 carbon fiber wrap
  • Fiat 130 camo and patterned wrap

How much vinyl to wrap a Fiat 130

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1969–1978coupe, sedan (2 or 4 doors)185.8 in (4,720 mm) to 187.0 in (4,750 mm)about 56 ft (17 m) for the coupe to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m)

Fiat 130 wrap cost factors

The Fiat 130 wrap cost depends on the body style, the film type, and the labor to handle the brightwork and the front end. A full wrap of the coupe uses about 56 ft (17 m) of film, while the sedan uses 57 ft (17.5 m), so the material cost is nearly identical. The final cost rises if the wrap includes chrome delete on the window trim or paint protection film on the front clip.

  • Film for a full wrap: about 56 ft (17 m) for the coupe to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).
  • Body: coupe, sedan (2 or 4 doors).

Fiat 130 wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat 130, first generation, factory photo
Factory color shown

1969–1978 Fiat 130 coupe, sedan (first generation)

1969–1978coupe, sedan (2 or 4 doors)185.8 in (4,720 mm) to 187.0 in (4,750 mm)

The first generation Fiat 130 came as a 2-door coupe and a 4-door sedan, and the body style decides the panel plan and the film amount. The coupe has long doors, no window frames on the side glass and a short rear deck, so the wrap has fewer seams around the body. The sedan has four doors and framed windows, which adds more cuts around the handles and the B-pillar. Both bodies are about 187 inches long, so the main difference is the number of doors and the roof line.

Film: about 56 ft (17 m) for the coupe to 57 ft (17.5 m) for the sedan, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Fiat 130

Partial wrap choices for the Fiat 130 include the roof, hood, and mirror caps without covering the whole car. A chrome delete on the window trim and badges is a separate job that uses black film on the bright metal parts. Paint protection film (PPF) in clear film on the front end shields the leading edge of the hood, fenders and bumper from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Fiat 130: body, cut-outs and film

A Fiat 130 vinyl wrap has to follow the long roof, flat sides and the separate front and rear bumpers of this car. The coupe has a lower, sleeker roofline that leaves less sheet metal on the roof but adds more on the rear pillars. The sedan has four doors and a taller greenhouse, which means more film around the window frames and door handles. Both body styles measure between 185.8 in (4,720 mm) and 187.0 in (4,750 mm), so the total film amount stays close.

Fiat 130 wrap ideas work best when the installer removes the door handles, mirrors, and the chrome trim along the beltline and the grille before the film goes on. The wrap then needs cut-outs for the door locks, fuel filler, side marker lights and the windshield washer nozzles. The bumpers on this car are separate metal parts, and many owners wrap or paint them to match the body.

How much vinyl to wrap a Fiat 130 is a fixed figure because the car had only one generation, built from 1969 to 1978. The body styles are the same length, so the film amount does not change by model year. Buyers of the coupe order about 56 ft (17 m), and buyers of the sedan order about 57 ft (17.5 m) of 60-inch film.

Questions about wrapping a Fiat 130

How much vinyl does it take to wrap a Fiat 130?

How much vinyl does it take to wrap a Fiat 130? About 56 ft (17 m) for the coupe and 57 ft (17.5 m) for the sedan, using 60-inch cast film. The figures cover the full body, including film tucked into the door jambs and under the edges. The coupe needs slightly less film because it has two doors and a smaller roof panel.

Which Fiat 130 body takes more film?

Which Fiat 130 body takes more film? The sedan takes more film: about 57 ft (17.5 m) against 56 ft (17 m) for the coupe. The extra door and larger rear side windows add surface area that must be covered. The difference is small, but shopping for the sedan means ordering one more running foot of film.

Can I wrap only the hood or the roof of a Fiat 130?

Can I wrap only the hood or the roof of a Fiat 130? Yes, a partial wrap can cover just the roof, the hood, or the mirror caps. The roof of this car is a single large panel from the windshield to the rear window, so it is one of the easier pieces to wrap alone. A hood wrap can stop at the front edge or fold under to the underside, depending on the look you want.

Is a Fiat 130 hard to wrap?

Is a Fiat 130 hard to wrap? The Fiat 130 is hard to wrap because of its separate chrome bumpers, door handles, and the trim along the side windows. The flat panels are easy, but the front grille and the rear light surrounds need careful cuts and heat. A coupe is easier than the sedan because it has fewer doors and no window frames to work around.