Wraps by car

Fiat 132 wrap

The Fiat 132 wrap page covers the single generation of this mid-size sedan, produced from 1972 to 1982. A full vinyl wrap of the four-door body takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Fiat 132, first generation, factory photo
Fiat 132, first generation. Factory color shown.

Fiat 132 wrap colors and ideas

  • Fiat 132 black wrap
  • Fiat 132 white wrap
  • Fiat 132 gray wrap
  • Fiat 132 silver wrap
  • Fiat 132 red wrap
  • Fiat 132 blue wrap
  • Fiat 132 green wrap
  • Fiat 132 yellow wrap
  • Fiat 132 orange wrap
  • Fiat 132 purple wrap
  • Fiat 132 pink wrap
  • Fiat 132 teal wrap
  • Fiat 132 brown wrap
  • Fiat 132 gold wrap
  • Fiat 132 chrome wrap
  • Fiat 132 color shift wrap
  • Fiat 132 carbon fiber wrap
  • Fiat 132 camo and patterned wrap

How much vinyl to wrap a Fiat 132

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1972–1982sedan (4 doors)173.4 in (4,405 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Fiat 132 wrap cost factors

Fiat 132 wrap cost depends on film type, paint condition, and the number of parts removed. This 173.4 in (4,405 mm) sedan takes about 49 ft (15 m) of standard cast film. Chrome or patterned film adds material, with about 61 ft (18.5 m) needed. A car of these years often needs more prep for old or repainted panels.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: sedan (4 doors).

Fiat 132 wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat 132, first generation, factory photo
Factory color shown

1972–1982 Fiat 132 sedan (first generation)

1972–1982sedan (4 doors)173.4 in (4,405 mm)

The first-generation Fiat 132 from 1972–1982 may have original or repainted panels after decades. A test spot on the paint shows whether the surface is sound before a full wrap. Old paint can lift when film is removed, so a panel-by-panel check is wise.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Fiat 132

Partial wrap options for the Fiat 132 include the roof, hood, and mirror caps. A chrome delete covers the window trim and badges with black film. Clear paint protection film (PPF) on the front end shields the nose from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Fiat 132: body, cut-outs and film

A Fiat 132 vinyl wrap covers one body style, a four-door sedan measuring 173.4 in (4,405 mm) long. The mid-size shape has large, fairly flat side panels, which makes film layout straightforward. The sedan roof and the trunk lid are easy to wrap as single pieces.

Fiat 132 wrap ideas start with door handles, mirrors, and the trunk lock that need cut-outs. The chrome window trim and the front grille come off for a clean edge. The bumpers are best wrapped off the car because of their curves.

For how much vinyl to wrap a Fiat 132, you only count one generation, since the catalog lists the 1972–1982 body. A color change wrap of the whole sedan needs about 49 ft (15 m) of 60-inch (1.52 m) cast film. Chrome or patterned film requires about 61 ft (18.5 m) because the pattern has to be matched.

Questions about wrapping a Fiat 132

How much vinyl does it take to wrap a Fiat 132?

Yes, a Fiat 132 takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap.

Can I wrap only the hood or the roof of a Fiat 132?

Yes, the Fiat 132 hood and roof can be wrapped alone, along with mirror caps as smaller jobs.

Is a Fiat 132 hard to wrap?

The Fiat 132 is not hard to wrap, but old paint and chrome trim add work.

How many generations of the Fiat 132 does this page cover?

This page covers one generation of the Fiat 132, produced from 1972 to 1982.