Wraps by car

Fiat 508 wrap

This page covers the Fiat 508 wrap in vinyl. The Fiat 508 is a compact sedan with two doors. The car was built from 1932 to 1939 in one generation. A full wrap of the body takes about 39 ft (12 m) of 60-inch (1.52 m) cast film.

1generations12 mof film for a full wrap

Fiat 508, first generation, factory photo
Fiat 508, first generation. Factory color shown.

Fiat 508 wrap colors and ideas

  • Fiat 508 black wrap
  • Fiat 508 white wrap
  • Fiat 508 gray wrap
  • Fiat 508 silver wrap
  • Fiat 508 red wrap
  • Fiat 508 blue wrap
  • Fiat 508 green wrap
  • Fiat 508 yellow wrap
  • Fiat 508 orange wrap
  • Fiat 508 purple wrap
  • Fiat 508 pink wrap
  • Fiat 508 teal wrap
  • Fiat 508 brown wrap
  • Fiat 508 gold wrap
  • Fiat 508 chrome wrap
  • Fiat 508 color shift wrap
  • Fiat 508 carbon fiber wrap
  • Fiat 508 camo and patterned wrap

How much vinyl to wrap a Fiat 508

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1932–1939sedan (2 doors)123.6 in (3,140 mm)about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m)

Fiat 508 wrap cost factors

Fiat 508 wrap cost depends on film type, surface preparation, and the number of panels covered. A full wrap uses about 39 ft (12 m) of cast film, or 46 ft (14 m) for chrome or patterned film. Older paint may need more prep work before the wrap. The car's small size and two doors keep the panel count low.

  • Film for a full wrap: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).
  • Body: sedan (2 doors).
  • Two long side doors: each door is one large piece of film.

Fiat 508 wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat 508, first generation, factory photo
Factory color shown

1932–1939 Fiat 508 sedan (first generation)

1932–1939sedan (2 doors)123.6 in (3,140 mm)

The first generation Fiat 508 was built from 1932 to 1939 as a two-door sedan. Paint age on a car of these years varies, so panels may be original or repainted. A test spot on the paint comes before a full wrap to check adhesion. The body is 123.6 in (3,140 mm) long and needs about 39 ft (12 m) of cast film.

Two long side doors: each door is one large piece of film.

Film: about 39 ft (12 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).

Roof, hood, chrome delete and PPF on a Fiat 508

Partial wrap choices for the Fiat 508 include the roof, hood, and mirror caps. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end. These smaller jobs use less film than a full wrap and take less time.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Fiat 508: body, cut-outs and film

The Fiat 508 vinyl wrap suits a small two-door sedan body. The car measures 123.6 in (3,140 mm) long, so panels are short and use less film. A single body style means every wrap follows the same panel layout. The two side doors are long, and each door is one large piece of film.

Fiat 508 wrap ideas start with the long side doors, which become one large film panel each. The body has few complex curves, but the roof and hood are simple panels to cover. For a clean result, remove badges and handles before film goes on. Window trim and badges can be covered separately with chrome delete film.

How much vinyl to wrap a Fiat 508 depends on the film choice and the car's condition. The body needs about 39 ft (12 m) of cast film in a 60-inch (1.52 m) width. A chrome or patterned film takes about 46 ft (14 m) because of extra trimming and matching. This car has one generation, so the estimate stays the same for all years.

Questions about wrapping a Fiat 508

How much vinyl does it take to wrap a Fiat 508?

A Fiat 508 full wrap takes about 39 ft (12 m) of 60-inch (1.52 m) cast film. This figure is for the two-door sedan body from 1932 to 1939. Chrome or patterned film increases the amount to about 46 ft (14 m).

Can I wrap only the hood or the roof of a Fiat 508?

Yes, you can wrap only the hood or the roof of a Fiat 508. These are part of the partial wrap options along with mirror caps. The hood and roof are simple panels and use less film than a full wrap.

Is a Fiat 508 hard to wrap?

A Fiat 508 wrap adds work on the long side doors, because each door is one large piece of film. The car is small, with a length of 123.6 in (3,140 mm), so panels are short and easy to reach. The wrap is not hard for a practiced installer, but the old paint may need extra prep.

How many generations of the Fiat 508 does this page cover?

This page covers one generation of the Fiat 508. The model was built from 1932 to 1939 as a two-door sedan. The film estimate is the same for all years of that generation.