Wraps by car

Fiat 600 Multipla wrap

The Fiat 600 Multipla wrap page covers the 1956–1967 first generation van. This catalog lists one generation, and a full vinyl wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

1generations15.5 mof film for a full wrap

Fiat 600 Multipla, first generation, factory photo
Fiat 600 Multipla, first generation. Factory color shown.

Fiat 600 Multipla wrap colors and ideas

  • Fiat 600 Multipla black wrap
  • Fiat 600 Multipla white wrap
  • Fiat 600 Multipla gray wrap
  • Fiat 600 Multipla silver wrap
  • Fiat 600 Multipla red wrap
  • Fiat 600 Multipla blue wrap
  • Fiat 600 Multipla green wrap
  • Fiat 600 Multipla yellow wrap
  • Fiat 600 Multipla orange wrap
  • Fiat 600 Multipla purple wrap
  • Fiat 600 Multipla pink wrap
  • Fiat 600 Multipla teal wrap
  • Fiat 600 Multipla brown wrap
  • Fiat 600 Multipla gold wrap
  • Fiat 600 Multipla chrome wrap
  • Fiat 600 Multipla color shift wrap
  • Fiat 600 Multipla carbon fiber wrap
  • Fiat 600 Multipla camo and patterned wrap

How much vinyl to wrap a Fiat 600 Multipla

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1956–1967van (4 doors)139.0 in (3,531 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Fiat 600 Multipla wrap cost factors

Fiat 600 Multipla wrap cost depends on the film area, the film type, and the labor to work around the sliding doors. The van needs about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap, and chrome or patterned film raises the amount to about 59 ft (18 m). Surface preparation and cut-outs add time, but a single-generation body means no surprises between model years.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: van (4 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.

Fiat 600 Multipla wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat 600 Multipla, first generation, factory photo
Factory color shown

1956–1967 Fiat 600 Multipla van (first generation)

1956–1967van (4 doors)139.0 in (3,531 mm)

The first generation Fiat 600 Multipla, built from 1956 to 1967, has sliding side doors, and the tracks stay bare, so the film is cut along them. The installer must keep the film edge clean where it meets the track, because the door movement would catch a folded edge. This cut line becomes a visible seam when the doors are closed, so it is planned with the color breaks of the design.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Fiat 600 Multipla

A partial wrap on a Fiat 600 Multipla can cover the roof, hood, or mirror caps with a manageable amount of film. A chrome delete covers the window trim and badges with black film, which suits the van's brightwork. Paint protection film (PPF) is clear film applied to the front end to protect the paint from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Fiat 600 Multipla: body, cut-outs and film

A Fiat 600 Multipla vinyl wrap has to deal with the van's 139.0 in (3,531 mm) length and four sliding doors. The body is a single generation, so one set of measurements covers every example. The short overall length keeps the job manageable, but the tall sides add surface area.

Fiat 600 Multipla wrap ideas often start with the long, flat side panels that suit a full color change. The sliding door tracks stay bare, so the film is cut along them and those lines become part of the design. Installers remove badges and trim around the windows to keep edges hidden.

How much vinyl to wrap a Fiat 600 Multipla depends on the film type, because chrome or patterned film needs about 59 ft (18 m). A standard cast film takes about 51 ft (15.5 m) of 60-inch (1.52 m) material. Since the catalog covers only the 1956–1967 generation, these figures apply to every van of this model.

Questions about wrapping a Fiat 600 Multipla

How much vinyl does it take to wrap a Fiat 600 Multipla?

A Fiat 600 Multipla takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film for a full wrap. If the wrap uses chrome or patterned film, plan for about 59 ft (18 m). These figures come from the catalog estimate for the newest body.

Are the sliding doors of a Fiat 600 Multipla wrapped?

No, the sliding doors of a Fiat 600 Multipla are not fully wrapped because the tracks stay bare, and the film is cut along them. The installer leaves the track area uncovered so the door can slide without catching the film edge.

Can I wrap only the hood or the roof of a Fiat 600 Multipla?

Yes, you can wrap only the hood or the roof of a Fiat 600 Multipla as a partial job. The roof, hood, and mirror caps are listed as smaller projects for this van. A partial wrap uses less film and targets the areas you want to change or protect.

Is a Fiat 600 Multipla hard to wrap?

A Fiat 600 Multipla is not especially hard to wrap for an installer, but the sliding door tracks add work because the film must be cut along them. The van's 139.0 in (3,531 mm) length means long panels that need careful handling. The single generation means the installer knows the body shape before starting.