Wraps by car

Fiat Coupe wrap

The Fiat Coupe wrap guide covers the one-generation sports car built from 1993 to 2001. A full vinyl wrap of the coupe body takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. Patterned or chrome film needs about 57 ft (17.5 m) because of extra material for alignment.

1generations14 mof film for a full wrap

Fiat Coupe, first generation, factory photo
Fiat Coupe, first generation. Factory color shown.

Fiat Coupe wrap colors and ideas

  • Coupe black wrap
  • Coupe white wrap
  • Coupe gray wrap
  • Coupe silver wrap
  • Coupe red wrap
  • Coupe blue wrap
  • Coupe green wrap
  • Coupe yellow wrap
  • Coupe orange wrap
  • Coupe purple wrap
  • Coupe pink wrap
  • Coupe teal wrap
  • Coupe brown wrap
  • Coupe gold wrap
  • Coupe chrome wrap
  • Coupe color shift wrap
  • Coupe carbon fiber wrap
  • Coupe camo and patterned wrap

How much vinyl to wrap a Fiat Coupe

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1993–2001coupe (2 doors)167.3 in (4,250 mm)about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Coupe wrap cost factors

Coupe wrap cost depends mainly on the film amount and the condition of the paint on a car from 1993–2001. A full wrap uses about 46 ft (14 m) of film, and shops may charge more for extra prep if the paint is cracked or faded. Chrome or patterned film adds about 57 ft (17.5 m) of material, which raises the cost. The car has only one body style, a two-door coupe, so there is no cost difference between trims.

  • Film for a full wrap: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: coupe (2 doors).
  • Two long side doors: each door is one large piece of film.

Coupe wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat Coupe, first generation, factory photo
Factory color shown

1993–2001 Coupe coupe (first generation)

1993–2001coupe (2 doors)167.3 in (4,250 mm)

The first generation Fiat Coupe from 1993–2001 looks the same outside across all years, so the wrap coverage is identical. The coupe is 167.3 in (4,250 mm) long, and a full wrap takes about 46 ft (14 m) of 60-inch (1.52 m) cast film. Before wrapping, check the paint on a car of these years: panels may be original or repainted, and a test spot comes before a full wrap. The two long doors are one large piece each, which makes the side wrap simple.

Two long side doors: each door is one large piece of film.

Film: about 46 ft (14 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Coupe

A partial wrap on a Fiat Coupe can cover the roof, hood, or mirror caps as separate jobs. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs use less material than a full wrap of about 46 ft (14 m).

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Fiat Coupe: body, cut-outs and film

A Fiat Coupe vinyl wrap deals with one body style: a two-door coupe with long side doors. The car is 167.3 in (4,250 mm) long, so the roof, hood, and side panels are sized for a compact sports car. Each door is a single large piece of film, which makes the side wrap cleaner but requires careful handling. The coupe shape has few complex curves, so standard cast film works well.

Coupe wrap ideas start with the two long side doors, since each door is wrapped as one large film piece. The door handles and mirrors need cut-outs, and the front and rear bumpers come off for a clean wrap. Badges are removed before the wrap and can be reinstalled after the film sets. The side skirts should be removed to wrap them properly.

How much vinyl to wrap a Coupe depends on the film type, not the generation, because only one generation exists. A standard color change wrap on the 1993–2001 body uses about 46 ft (14 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds about 11 ft (3.5 m) for matching the pattern. The coupe body style does not change between years, so the estimate is the same for all Coupes.

Questions about wrapping a Fiat Coupe

How much vinyl does it take to wrap a Fiat Coupe?

About 46 ft (14 m) of 60-inch (1.52 m) cast film is needed to wrap a Fiat Coupe. For chrome or patterned film, the estimate is about 57 ft (17.5 m). The coupe body is 167.3 in (4,250 mm) long, and both figures come from the film estimate for the 1993–2001 body.

Can I wrap only the hood or the roof of a Coupe?

Yes, you can wrap only the hood or the roof of a Coupe. A partial wrap on the roof, hood, or mirror caps is a common smaller job. You can also do a chrome delete on the window trim and badges, or apply paint protection film (PPF) to the front end.

Is a Coupe hard to wrap?

A Coupe is not especially hard to wrap, but the two long side doors add some work because each door is one large piece of film. The car is 167.3 in (4,250 mm) long, so you need a helper or a steady hand to position the door film. The coupe shape is fairly simple, so a standard cast film works well.

How many generations of the Coupe does this page cover?

This page covers one generation of the Fiat Coupe. The catalog includes only the first generation, produced from 1993 to 2001. The body style is a coupe with two doors, and all years share the same dimensions and wrap estimate.