Wraps by car

Fiat Croma wrap

The Fiat Croma wrap guide covers both generations of this full-size car. The newest body is the second generation, produced from 2005 to 2010. A full vinyl wrap of that body takes about 64 ft (19.5 m) of 60-inch cast film. The first generation, from 1985 to 1996, takes about 52 ft (16 m).

2generations19.5 mof film for a full wrap

Fiat Croma, second generation, factory photo
Fiat Croma, second generation. Factory color shown.

Fiat Croma wrap colors and ideas

  • Croma black wrap
  • Croma white wrap
  • Croma gray wrap
  • Croma silver wrap
  • Croma red wrap
  • Croma blue wrap
  • Croma green wrap
  • Croma yellow wrap
  • Croma orange wrap
  • Croma purple wrap
  • Croma pink wrap
  • Croma teal wrap
  • Croma brown wrap
  • Croma gold wrap
  • Croma chrome wrap
  • Croma color shift wrap
  • Croma carbon fiber wrap
  • Croma camo and patterned wrap

How much vinyl to wrap a Fiat Croma

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2005–2010wagon (5 doors)187.2 in (4,756 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)
1985–1996liftback (5 doors)178.0 in (4,520 mm)about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m)

Croma wrap cost factors

The Croma wrap cost depends on the film area and the amount of cut-out work. The second generation needs about 64 ft (19.5 m) of film and has more possible cut-outs. The first generation needs about 52 ft (16 m) and has a simpler body. Chrome or patterned film adds about 10 ft (3 m) to the estimate of each generation.

  • Film for a full wrap: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2008: bumpers and lights differ between the versions, and so do the film cuts.

Croma wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat Croma, second generation, factory photo
Factory color shown

2005–2010 Croma wagon (second generation)

2005–2010wagon (5 doors)187.2 in (4,756 mm)

The second generation Fiat Croma was restyled in 2008. Bumpers and lights changed, so film cut for one version does not fit the other. A wrap installer counts the film from the bumper and light shapes. The body length stays 187.2 in (4,756 mm) through the generation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Fiat Croma, first generation, factory photo
Factory color shown

1985–1996 Croma liftback (first generation)

1985–1996liftback (5 doors)178.0 in (4,520 mm)

The first generation Fiat Croma ran from 1985 to 1996. On a car of these years panels may be original or repainted, so a test spot comes before a full wrap. The film estimate of 52 ft (16 m) assumes a standard body without extra trim. This liftback has no sunroof or fog lamp cut-outs to worry about.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 52 ft (16 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 67 ft (20.5 m).

Roof, hood, chrome delete and PPF on a Croma

A partial wrap on the Fiat Croma can cover the roof, hood, or mirror caps. A chrome delete covers window trim and badges with black film. Paint protection film (PPF) is a clear film for the front end. These jobs use less film than a full wrap and leave the rest of the paint visible.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Fiat Croma: body, cut-outs and film

A Fiat Croma vinyl wrap has to follow the shape of its large five-door body. The second generation is a wagon with a length of 187.2 in (4,756 mm). The first generation is a liftback with a length of 178.0 in (4,520 mm). Both bodies need careful work around the tailgate and roof.

Croma wrap ideas often start with the tailgate because its rear glass is set into it. The film ends at the edge of that glass on both generations. Some trims of the second generation have a sunroof, so the roof film is cut around its opening. Fog lamps in the front bumper of some trims require cut-outs in the bumper film.

To know how much vinyl to wrap a Croma, compare the two generations. The second generation needs about 64 ft (19.5 m) of 60-inch film. The first generation needs about 52 ft (16 m) because it is shorter. The restyling in 2008 means early and late second-generation cars have different bumper shapes.

Questions about wrapping a Fiat Croma

How much vinyl does it take to wrap a Fiat Croma?

It takes about 64 ft (19.5 m) of 60-inch cast film to wrap a second generation Fiat Croma. That figure covers the whole body including the roof and tailgate. The first generation takes about 52 ft (16 m) of the same film. Chrome or patterned film needs about 74 ft (22.5 m) for the second generation.

Can the roof of a Croma be wrapped?

Yes, the roof of a Fiat Croma can be wrapped on its own. On the second generation some trims have a sunroof, so the film is cut around its opening. On the first generation the roof is plain and the film goes edge to edge. A roof wrap is a common partial job on both generations.

Which years of the Croma take the same film cuts?

The same film cuts fit a Fiat Croma only within the same version. For the second generation, 2005–2007 cars take one set of cuts and 2008–2010 cars take another because of the restyling. For the first generation, all years from 1985 to 1996 share the same basic body. The restyling changed bumpers and lights, so film for one version does not fit the other.

Can I wrap only the hood or the roof of a Croma?

Yes, you can wrap only the hood or the roof of a Fiat Croma. A partial wrap covers the roof, hood, or mirror caps. A chrome delete covers window trim and badges with black film. Paint protection film is a clear film for the front end, including the hood.