Wraps by car

Fiat Duna wrap

Fiat Duna wrap work covers one generation of this subcompact, made from 1987 to 1991. A vinyl wrap changes the color of the sedan or wagon without paint. The sedan is 167.7 in (4,260 mm) long and the wagon reaches 168.9 in (4,290 mm). A full wrap of the newest body takes about 48 ft (14.5 m) for the sedan to 52 ft (16 m) for the wagon of 60-inch (1.52 m) cast film.

1generations14.5 mof film for a full wrap

Fiat Duna, first generation, factory photo
Fiat Duna, first generation. Factory color shown.

Fiat Duna wrap colors and ideas

  • Duna black wrap
  • Duna white wrap
  • Duna gray wrap
  • Duna silver wrap
  • Duna red wrap
  • Duna blue wrap
  • Duna green wrap
  • Duna yellow wrap
  • Duna orange wrap
  • Duna purple wrap
  • Duna pink wrap
  • Duna teal wrap
  • Duna brown wrap
  • Duna gold wrap
  • Duna chrome wrap
  • Duna color shift wrap
  • Duna carbon fiber wrap
  • Duna camo and patterned wrap

How much vinyl to wrap a Fiat Duna

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1987–1991sedan, wagon (4 or 5 doors)167.7 in (4,260 mm) to 168.9 in (4,290 mm)about 48 ft (14.5 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

Duna wrap cost factors

Duna wrap cost depends on the body style, the film, and the prep work. The wagon has a larger tailgate and more surface area than the sedan, so it takes more film. A chrome or patterned film can raise the amount to about 66 ft (20 m), which adds to the material. The condition of the paint and any rust repair also affect the final cost.

  • Film for a full wrap: about 48 ft (14.5 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Duna wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat Duna, first generation, factory photo
Factory color shown

1987–1991 Duna sedan, wagon (first generation)

1987–1991sedan, wagon (4 or 5 doors)167.7 in (4,260 mm) to 168.9 in (4,290 mm)

The first generation Fiat Duna comes as a sedan or a wagon with four or five doors. The sedan has a separate trunk while the wagon has a tall tailgate. That difference changes the panel plan and the amount of film you need. The wagon takes about 52 ft (16 m) of 60-inch (1.52 m) cast film, and the sedan takes about 48 ft (14.5 m).

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the sedan to 52 ft (16 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Duna

A partial wrap on a Duna can cover just the roof, hood, or mirror caps. A Duna chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film that guards the front end from stone chips. These smaller jobs use less film and cost less than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Fiat Duna: body, cut-outs and film

Fiat Duna vinyl wrap depends on the body style you have. The four-door sedan has a separate trunk, so the rear panel is one piece. The wagon is a four- or five-door with a tall tailgate that adds surface area. That is why the wagon takes more film than the sedan.

Duna wrap ideas start with the tailgate of the wagon. The rear glass sits inside the tailgate, so the film ends at the edge of the glass. For the sedan, the trunk lid wraps past the edges before the cut line. Door handles and mirrors also need cut-outs.

How much vinyl to wrap a Duna changes with the body length. The sedan uses about 48 ft (14.5 m) and the wagon about 52 ft (16 m) of 60-inch (1.52 m) cast film. A color change wrap adds little, but a chrome or patterned film can raise the total to about 66 ft (20 m).

Questions about wrapping a Fiat Duna

How much vinyl does it take to wrap a Fiat Duna?

About 48 ft (14.5 m) for the sedan to 52 ft (16 m) for the wagon of 60-inch (1.52 m) cast film is what a full wrap of a Fiat Duna takes. The wagon needs more because of its tall tailgate. A chrome or patterned film can raise the amount to about 66 ft (20 m).

Which Duna body takes more film?

The wagon takes more film than the sedan. The wagon is longer at 168.9 in (4,290 mm) and has a tall tailgate. The sedan is 167.7 in (4,260 mm) and has a separate trunk. So the wagon needs about 52 ft (16 m) of 60-inch (1.52 m) film, while the sedan needs about 48 ft (14.5 m).

Can I wrap only the hood or the roof of a Duna?

Yes, a partial wrap can cover only the hood or the roof of a Duna. You can also wrap the mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film that protects the front end.

Is a Duna hard to wrap?

A Duna is not hard to wrap, but the wagon adds a step. The tailgate has the rear glass in it, so the film ends at the edge of the glass. The small size of this subcompact keeps panel work simple. The sedan and wagon are both short, so you have less film to handle.