Wraps by car

Fiat Marea wrap

The Fiat Marea wrap page covers this compact sedan and wagon from its single cataloged generation, produced from 1996 to 2002. A full vinyl wrap on the newest body takes about 49 ft (15 m) for the sedan and up to 61 ft (18.5 m) for the wagon when using 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Fiat Marea, first generation, factory photo
Fiat Marea, first generation. Factory color shown.

Fiat Marea wrap colors and ideas

  • Marea black wrap
  • Marea white wrap
  • Marea gray wrap
  • Marea silver wrap
  • Marea red wrap
  • Marea blue wrap
  • Marea green wrap
  • Marea yellow wrap
  • Marea orange wrap
  • Marea purple wrap
  • Marea pink wrap
  • Marea teal wrap
  • Marea brown wrap
  • Marea gold wrap
  • Marea chrome wrap
  • Marea color shift wrap
  • Marea carbon fiber wrap
  • Marea camo and patterned wrap

How much vinyl to wrap a Fiat Marea

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1996–2002sedan, wagon (4 or 5 doors)172.8 in (4,390 mm) to 176.8 in (4,490 mm)about 49 ft (15 m) for the sedan to 61 ft (18.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)

Marea wrap cost factors

The Marea wrap cost depends on the film amount and the labor for the body style you have. The sedan uses about 49 ft (15 m) of film, while the wagon uses up to 61 ft (18.5 m), so the wagon carries a higher material quantity. The tailgate glass and extra doors on the wagon add cutting and tucking time.

  • Film for a full wrap: about 49 ft (15 m) for the sedan to 61 ft (18.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Marea wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat Marea, first generation, factory photo
Factory color shown

1996–2002 Marea sedan, wagon (first generation)

1996–2002sedan, wagon (4 or 5 doors)172.8 in (4,390 mm) to 176.8 in (4,490 mm)

The first generation Fiat Marea, sold from 1996 to 2002, comes as a sedan or a wagon. The style you choose decides the panel plan and the film amount, with the wagon being longer at up to 176.8 in (4,490 mm). The wagon has five doors including the tailgate, which adds one more panel to wrap than the four-door sedan.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) for the sedan to 61 ft (18.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Marea

A partial wrap on a Fiat Marea can cover the roof, hood, or mirror caps without wrapping the whole car. A Marea chrome delete covers the window trim and badges with black film for a darker look. Paint protection film (PPF) is also an option, applied as a clear film on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Fiat Marea: body, cut-outs and film

The Fiat Marea vinyl wrap job depends on the body style, as the sedan is shorter at 172.8 in (4,390 mm) and the wagon reaches 176.8 in (4,490 mm). These dimensions mean the wagon needs more film to cover its longer rear section and larger roof area. Both body styles have four or five doors, so the wrap plan includes all door edges and handles.

Marea wrap ideas often start with the tailgate, since the rear glass is set into it and the film must end at the edge of that glass. This requires careful cutting around the glass and tucking the film along its border. The door handles, mirrors, and roof rails on the wagon also need cut-outs or removal for a clean result.

For someone counting how much vinyl to wrap a Marea, the one generation in the catalog means the amount stays the same across all production years. The film estimate ranges from 49 ft (15 m) on the sedan to 61 ft (18.5 m) on the wagon. A chrome or patterned film might require up to about 69 ft (21 m), so measure twice before ordering.

Questions about wrapping a Fiat Marea

How much vinyl does it take to wrap a Fiat Marea?

It takes about 49 ft (15 m) of vinyl to wrap a Fiat Marea sedan and up to 61 ft (18.5 m) for the wagon. These figures assume 60-inch (1.52 m) cast film and no chrome or patterned film, which can raise the amount to about 69 ft (21 m).

Which Marea body takes more film?

The Marea wagon takes more film than the sedan, needing up to 61 ft (18.5 m) compared to about 49 ft (15 m). The wagon is longer and has a taller roof and tailgate, which add surface area to cover.

Can I wrap only the hood or the roof of a Marea?

You can wrap only the hood or the roof of a Marea as a partial wrap, which is a smaller job than a full wrap. Mirror caps are another common partial wrap area, and a chrome delete on the window trim and badges is also possible.

Is a Marea hard to wrap?

A Marea is not especially hard to wrap, but the tailgate adds work because the rear glass is set into it and the film must end at the edge of that glass. The wagon's extra length and additional door also mean more panels to cover compared to the sedan.