Wraps by car

Fiat Multipla wrap

The Fiat Multipla wrap page covers the 1998–2010 minivan in its single generation. A full vinyl wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. The page explains how the sliding doors, length, and restyling affect film use and cost.

1generations19 mof film for a full wrap

Fiat Multipla, first generation, factory photo
Fiat Multipla, first generation. Factory color shown.

Fiat Multipla wrap colors and ideas

  • Multipla black wrap
  • Multipla white wrap
  • Multipla gray wrap
  • Multipla silver wrap
  • Multipla red wrap
  • Multipla blue wrap
  • Multipla green wrap
  • Multipla yellow wrap
  • Multipla orange wrap
  • Multipla purple wrap
  • Multipla pink wrap
  • Multipla teal wrap
  • Multipla brown wrap
  • Multipla gold wrap
  • Multipla chrome wrap
  • Multipla color shift wrap
  • Multipla carbon fiber wrap
  • Multipla camo and patterned wrap

How much vinyl to wrap a Fiat Multipla

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2010van (5 doors)157.1 in (3,990 mm) to 161.0 in (4,090 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Multipla wrap cost factors

Multipla wrap cost depends on the size of the van and the amount of film, about 62 ft (19 m) for a full wrap. The sliding door tracks add labor because the film is cut along them and the tracks are left bare. A color change with chrome or patterned film needs about 72 ft (22 m) and more fitting time.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: van (5 doors).
  • Sliding side doors: the door tracks stay bare, and the film is cut along them.
  • Restyled in 2004: bumpers and lights differ between the versions, and so do the film cuts.

Multipla wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat Multipla, first generation, factory photo
Factory color shown

1998–2010 Multipla van (first generation)

1998–2010van (5 doors)157.1 in (3,990 mm) to 161.0 in (4,090 mm)

The first generation Fiat Multipla, built from 1998 to 2010, has sliding side doors. The door tracks stay bare on a wrap, and the film is cut along them, so the track line remains visible. The body was restyled in 2004, but the sliding door design stayed the same.

Sliding side doors: the door tracks stay bare, and the film is cut along them.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Multipla

A partial wrap on a Multipla can cover the roof, hood, or mirror caps without wrapping the whole van. Multipla chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film fitted on the front end to guard against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Fiat Multipla: body, cut-outs and film

A Fiat Multipla vinyl wrap must follow the van body and its 157.1 in (3,990 mm) to 161.0 in (4,090 mm) length. The five-door body has large flat panels that are straightforward to cover. The tall roof and deep bumpers add surface area compared with a small hatchback.

Multipla wrap ideas should account for the sliding side doors. The door tracks stay bare, so the film is cut along them and the track area remains visible. Around the front end, the headlights, grille, and fog lights are cut out rather than covered.

To know how much vinyl to wrap a Multipla, compare the two lengths of 3,990 mm and 4,090 mm after the 2004 restyling. The longer body needs slightly more film on the sides and bumpers. A shop will measure the actual car before cutting the vinyl.

Questions about wrapping a Fiat Multipla

How much vinyl does it take to wrap a Fiat Multipla?

A full wrap takes about 62 ft (19 m) of 60-inch (1.52 m) cast film. This estimate covers the newest Multipla body, from 2004 to 2010. Chrome or patterned film needs about 72 ft (22 m) because of pattern matching and extra material.

Are the sliding doors of a Multipla wrapped?

No, the sliding door tracks of a Multipla are not wrapped. The film is cut along the tracks, and the track area stays bare. This keeps the door mechanism clear and gives a clean edge.

Which years of the Multipla take the same film cuts?

The same film cuts fit the Multipla from 1998 to 2004, before the restyling. From 2004 to 2010, after the restyling, the cuts differ. The sliding door tracks stayed the same, but the front and rear ends changed.

Can I wrap only the hood or the roof of a Multipla?

Yes, you can wrap only the hood or the roof of a Multipla. Shops also offer partial wraps that cover the hood, roof, and mirror caps together. These smaller jobs use less film than a full wrap.