Wraps by car

Fiat Regata wrap

The Fiat Regata wrap page covers this compact sedan and wagon, produced in one generation from 1983 to 1990. A full vinyl wrap of the newest body takes about 48 ft (14.5 m) for the sedan or 51 ft (15.5 m) for the wagon, using 60-inch (1.52 m) cast film. The film estimate rises to about 66 ft (20 m) if you choose chrome or patterned vinyl.

1generations14.5 mof film for a full wrap

Fiat Regata, first generation, factory photo
Fiat Regata, first generation. Factory color shown.

Fiat Regata wrap colors and ideas

  • Regata black wrap
  • Regata white wrap
  • Regata gray wrap
  • Regata silver wrap
  • Regata red wrap
  • Regata blue wrap
  • Regata green wrap
  • Regata yellow wrap
  • Regata orange wrap
  • Regata purple wrap
  • Regata pink wrap
  • Regata teal wrap
  • Regata brown wrap
  • Regata gold wrap
  • Regata chrome wrap
  • Regata color shift wrap
  • Regata carbon fiber wrap
  • Regata camo and patterned wrap

How much vinyl to wrap a Fiat Regata

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1983–1990sedan, wagon (4 or 5 doors)167.7 in (4,260 mm) to 168.0 in (4,267 mm)about 48 ft (14.5 m) for the sedan to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m)

Regata wrap cost factors

Regata wrap cost depends mainly on the body style, the film type, and the labor for the tailgate and trim, not on the car's market value. The sedan needs about 48 ft (14.5 m) of 60-inch (1.52 m) film, while the wagon needs about 51 ft (15.5 m), so the wagon uses more material. A chrome or patterned film raises the amount to about 66 ft (20 m) and often costs more per foot than a solid color. The compact size keeps the panel count lower than on a large wagon, but the tailgate glass still adds cutting time.

  • Film for a full wrap: about 48 ft (14.5 m) for the sedan to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Regata wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat Regata, first generation, factory photo
Factory color shown

1983–1990 Regata sedan, wagon (first generation)

1983–1990sedan, wagon (4 or 5 doors)167.7 in (4,260 mm) to 168.0 in (4,267 mm)

The first generation Fiat Regata was produced from 1983 to 1990 as a sedan and a wagon, with four or five doors depending on the style. These body styles decide the panel plan and the film amount for a wrap. The sedan and wagon share the same front end and wheelbase, so only the rear section changes the layout. A wrap shop measures the roof, the tailgate, and the rear quarters differently for each style.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 48 ft (14.5 m) for the sedan to 51 ft (15.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 66 ft (20 m).

Roof, hood, chrome delete and PPF on a Regata

A partial wrap on a Regata can cover the roof, the hood, or the mirror caps, using less film than a full color change. A Regata chrome delete turns the bright trim into black film, focusing on the window trim and badges. Paint protection film (PPF) suits the front end with a clear film that guards the hood and bumper from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Fiat Regata: body, cut-outs and film

A Fiat Regata vinyl wrap deals with a compact body offered as a sedan and a wagon, with four or five doors depending on the style. The length stays between 167.7 in (4,260 mm) and 168.0 in (4,267 mm), so the panel plan is similar for both styles. The wagon adds a taller rear section and more glass area than the sedan, which increases the film amount to about 51 ft (15.5 m).

Regata wrap ideas should account for the tailgate, where the rear glass sits in the moving metal panel and the film ends at the edge of the glass. This means the tailgate is wrapped as a frame around the glass rather than as one flat sheet. The door handles, mirrors, and bumpers can stay on the car if you cut around them carefully. Removing the mirrors gives a cleaner edge on the front doors.

To work out how much vinyl to wrap a Regata, you compare the body styles rather than generations, because the catalog lists only the first generation from 1983 to 1990. The sedan takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast film for a full color change. The wagon takes about 51 ft (15.5 m) of the same film for a full wrap. Any chrome or patterned film pushes the estimate to about 66 ft (20 m).

Questions about wrapping a Fiat Regata

How much vinyl does it take to wrap a Fiat Regata?

A full Fiat Regata wrap takes about 48 ft (14.5 m) of 60-inch (1.52 m) cast vinyl for the sedan, or about 51 ft (15.5 m) for the wagon. If you pick a chrome or patterned film, the estimate goes up to about 66 ft (20 m) for either body style.

Which Regata body takes more film?

The Regata wagon takes more film than the sedan, about 51 ft (15.5 m) against about 48 ft (14.5 m) of 60-inch (1.52 m) cast vinyl. The wagon's taller rear and larger glass area add the extra material.

Can I wrap only the hood or the roof of a Regata?

Yes, you can wrap only the hood or the roof of a Regata as a partial wrap, and the mirror caps work as a smaller job too. A chrome delete covers the window trim and badges in black film, which is another partial option.

Is a Regata hard to wrap?

A Regata is not hard to wrap for a shop with experience, but the tailgate adds work because the rear glass sits in the moving panel and the film ends at the edge of the glass. The compact body length of about 168.0 in (4,267 mm) keeps the panels small, yet the window trim and door handles still need careful cut-outs.