Wraps by car

Fiat Seicento wrap

The Fiat Seicento wrap page covers the first-generation Fiat Seicento (1998–2005) and the vinyl wrap it needs. This subcompact hatchback has one generation in this catalog. A full wrap of the newest body takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film.

1generations11.5 mof film for a full wrap

Fiat Seicento, first generation, factory photo
Fiat Seicento, first generation. Factory color shown.

Fiat Seicento wrap colors and ideas

  • Seicento black wrap
  • Seicento white wrap
  • Seicento gray wrap
  • Seicento silver wrap
  • Seicento red wrap
  • Seicento blue wrap
  • Seicento green wrap
  • Seicento yellow wrap
  • Seicento orange wrap
  • Seicento purple wrap
  • Seicento pink wrap
  • Seicento teal wrap
  • Seicento brown wrap
  • Seicento gold wrap
  • Seicento chrome wrap
  • Seicento color shift wrap
  • Seicento carbon fiber wrap
  • Seicento camo and patterned wrap

How much vinyl to wrap a Fiat Seicento

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1998–2005hatchback (3 doors)131.4 in (3,337 mm) to 131.4 in (3,338 mm)about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m)

Seicento wrap cost factors

Seicento wrap cost depends on the film you choose and the size of the job. The car needs about 38 ft (11.5 m) of cast film for a full wrap, but chrome or patterned film requires about 49 ft (15 m). Partial wraps on the roof, hood, or mirror caps use less film and less labor.

  • Film for a full wrap: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).
  • Body: hatchback (3 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Two long side doors: each door is one large piece of film.
  • Restyled in 2000: bumpers and lights differ between the versions, and so do the film cuts.

Seicento wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat Seicento, first generation, factory photo
Factory color shown

1998–2005 Seicento hatchback (first generation)

1998–2005hatchback (3 doors)131.4 in (3,337 mm) to 131.4 in (3,338 mm)

The first-generation Fiat Seicento was made from 1998 to 2005 and restyled in 2000. The restyling changed the bumpers and lights, so film cut for one version does not fit the other. If you order pre-cut film, pick the version that matches your car.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Two long side doors: each door is one large piece of film.

Film: about 38 ft (11.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 49 ft (15 m).

Roof, hood, chrome delete and PPF on a Seicento

Partial wrap on a Seicento includes the roof, hood, and mirror caps. For chrome delete, the window trim and badges are covered with black film. Paint protection film (PPF) is clear film placed on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Fiat Seicento: body, cut-outs and film

A Fiat Seicento vinyl wrap works with a small three-door hatchback body. The car is 131.4 in (3,337 mm) long, so every panel is short and easy to handle. Its square shape and flat sides make cutting and fitting film straightforward.

Seicento wrap ideas include covering the two long side doors, each of which is one large piece of film. The tailgate has the rear glass in it, so the film ends at the edge of the glass. You can also wrap the roof, hood, and mirror caps for smaller jobs.

To know how much vinyl to wrap a Seicento, use about 38 ft (11.5 m) of 60-inch (1.52 m) cast film for a full body. If you choose chrome or patterned film, plan for about 49 ft (15 m). The car's size does not change between versions, so the same amount works for all years of this generation.

Questions about wrapping a Fiat Seicento

How much vinyl does it take to wrap a Fiat Seicento?

It takes about 38 ft (11.5 m) of 60-inch (1.52 m) cast film to wrap a Fiat Seicento. That amount covers the full body of the newest first-generation version. For chrome or patterned film, you need about 49 ft (15 m).

Which years of the Seicento take the same film cuts?

The Seicento was made from 1998 to 2005. The car was restyled in 2000, changing bumpers and lights. Therefore, 1998–2000 cars take the same film cuts, and 2000–2005 cars take the same film cuts.

Can I wrap only the hood or the roof of a Seicento?

You can wrap only the hood or the roof of a Seicento. Partial wraps on the roof, hood, and mirror caps are standard jobs. A hood-only wrap uses less film and is a good way to test a color.

Is a Seicento hard to wrap?

A Seicento is not hard to wrap because of its small size and flat panels. The two long side doors are each one large piece of film, which takes care to install. The tailgate with the rear glass in it means the film must end at the edge of the glass.