Wraps by car

Fiat Tempra wrap

The Fiat Tempra wrap page covers the 1990–1999 compact in its single generation, sedan and wagon. A full vinyl wrap of the newest body takes about 54 ft (16.5 m) for the sedan or 61 ft (18.5 m) for the wagon using 60-inch cast film. Chrome or patterned film can go up to about 69 ft (21 m).

1generations16.5 mof film for a full wrap

Fiat Tempra, first generation, factory photo
Fiat Tempra, first generation. Factory color shown.

Fiat Tempra wrap colors and ideas

  • Tempra black wrap
  • Tempra white wrap
  • Tempra gray wrap
  • Tempra silver wrap
  • Tempra red wrap
  • Tempra blue wrap
  • Tempra green wrap
  • Tempra yellow wrap
  • Tempra orange wrap
  • Tempra purple wrap
  • Tempra pink wrap
  • Tempra teal wrap
  • Tempra brown wrap
  • Tempra gold wrap
  • Tempra chrome wrap
  • Tempra color shift wrap
  • Tempra carbon fiber wrap
  • Tempra camo and patterned wrap

How much vinyl to wrap a Fiat Tempra

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1990–1999sedan, wagon (4 or 5 doors)171.4 in (4,354 mm) to 176.1 in (4,472 mm)about 54 ft (16.5 m) for the sedan to 61 ft (18.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m)

Tempra wrap cost factors

Tempra wrap cost depends on the body style, film type, and how many parts come off. The wagon needs about 61 ft (18.5 m) of film compared to 54 ft (16.5 m) for the sedan. A chrome or patterned film uses up to about 69 ft (21 m), which adds material and labor.

  • Film for a full wrap: about 54 ft (16.5 m) for the sedan to 61 ft (18.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).
  • Body: sedan, wagon (4 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Tempra wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat Tempra, first generation, factory photo
Factory color shown

1990–1999 Tempra sedan, wagon (first generation)

1990–1999sedan, wagon (4 or 5 doors)171.4 in (4,354 mm) to 176.1 in (4,472 mm)

The first generation Fiat Tempra came as a sedan or a wagon from 1990 to 1999. The style decides the panel plan and the film amount, with the wagon needing more vinyl. The sedan is shorter and simpler, while the wagon adds rear side panels and a tailgate.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 54 ft (16.5 m) for the sedan to 61 ft (18.5 m) for the wagon, 60-inch (1.52 m) cast film; chrome or patterned film: up to about 69 ft (21 m).

Roof, hood, chrome delete and PPF on a Tempra

A partial wrap on a Fiat Tempra can cover just the roof, hood, or mirror caps. Chrome delete on the window trim and badges is another option with black film. Paint protection film (PPF) as a clear film on the front end guards against stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Fiat Tempra: body, cut-outs and film

A Fiat Tempra vinyl wrap must fit two body styles with different panel sizes. The sedan measures 171.4 in (4,354 mm) and the wagon reaches 176.1 in (4,472 mm), so the wagon uses more film. Door count does not change the main panels, but the wagon's longer roof and rear quarters add surface area.

Tempra wrap ideas should account for the tailgate with the rear glass in it. The film ends at the edge of the glass, so the installer cuts around the window and leaves no film on the glass itself. This adds a clean edge but takes extra time for trimming.

How much vinyl to wrap a Tempra changes between the sedan and wagon. The sedan needs about 54 ft (16.5 m) and the wagon about 61 ft (18.5 m) with 60-inch cast film. There is only one generation, so the two body styles are the only difference for film amount.

Questions about wrapping a Fiat Tempra

How much vinyl does it take to wrap a Fiat Tempra?

A Fiat Tempra needs about 54 ft (16.5 m) for the sedan or 61 ft (18.5 m) for the wagon with 60-inch cast film. Chrome or patterned film can take up to about 69 ft (21 m).

Which Tempra body takes more film?

The Tempra wagon takes more film than the sedan. It needs about 61 ft (18.5 m) compared to 54 ft (16.5 m) for the sedan.

Can I wrap only the hood or the roof of a Tempra?

Yes, you can wrap only the hood or the roof of a Tempra. A partial wrap covers the roof, hood, or mirror caps as separate jobs.

Is a Tempra hard to wrap?

A Tempra is not very hard to wrap, but the tailgate with the rear glass in it adds work. The film ends at the edge of the glass, so cutting around it takes care. The wagon's length of 176.1 in (4,472 mm) also means more film to handle.