Wraps by car

Fiat Uno wrap

A Fiat Uno wrap changes the look of this subcompact hatchback with a full sheet of vinyl wrap. The Uno was built from 1983 to 2002 as a first generation that stayed in production for 19 years. A full wrap of the newest body takes about 43 ft (13 m) of 60-inch (1.52 m) cast film.

1generations13 mof film for a full wrap

Fiat Uno, first generation, factory photo
Fiat Uno, first generation. Factory color shown.

Fiat Uno wrap colors and ideas

  • Uno black wrap
  • Uno white wrap
  • Uno gray wrap
  • Uno silver wrap
  • Uno red wrap
  • Uno blue wrap
  • Uno green wrap
  • Uno yellow wrap
  • Uno orange wrap
  • Uno purple wrap
  • Uno pink wrap
  • Uno teal wrap
  • Uno brown wrap
  • Uno gold wrap
  • Uno chrome wrap
  • Uno color shift wrap
  • Uno carbon fiber wrap
  • Uno camo and patterned wrap

How much vinyl to wrap a Fiat Uno

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1983–2002hatchback (3 or 5 doors)143.5 in (3,645 mm)about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m)

Uno wrap cost factors

Uno wrap cost depends on the film type, the number of panels and the surface preparation on this 1983–2002 hatchback. A color change wrap uses one layer over the paint, while a matte or chrome film costs more to lay down smoothly. The 3-door and 5-door bodies have the same panel count, but the small size of the car keeps the material use to about 43 ft (13 m) of 60-inch (1.52 m) film. Labor is the biggest part because the tailgate glass area and the bumper corners need careful hand finishing.

  • Film for a full wrap: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).
  • Body: hatchback (3 or 5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Restyled in 1989: bumpers and lights differ between the versions, and so do the film cuts.

Uno wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat Uno, first generation, factory photo
Factory color shown

1983–2002 Uno hatchback (first generation)

1983–2002hatchback (3 or 5 doors)143.5 in (3,645 mm)

The first generation Fiat Uno ran from 1983 to 2002 and was restyled in 1989. The restyling changed the bumpers and the lights, so film cut for one version does not fit the other. A wrap kit made for a post-1989 Uno will leave gaps on the earlier bumpers and light surrounds. The body shell stayed the same length at 143.5 in (3,645 mm), but the trim differences mean a shop must match the film template to the exact year of the car.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 43 ft (13 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 52 ft (16 m).

Roof, hood, chrome delete and PPF on a Uno

A partial wrap on a Fiat Uno covers the roof, the hood or the mirror caps as single jobs. An Uno chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is clear film applied to the front end to shield the paint from stone chips. These options use less film than a full wrap and can be done without touching the tailgate.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Fiat Uno: body, cut-outs and film

The Fiat Uno vinyl wrap has to cover a small hatchback body offered only with three or five doors. The car is 143.5 in (3,645 mm) long, so the side panels are short and the roof is easy to reach. A wrap shop can film every panel without working around long wheel arches. The hatchback shape keeps the window pillars thin, which makes the wrap lines clean.

Uno wrap ideas need to account for a tailgate with the rear glass in it. The film ends at the edge of the glass and follows the tight radius around the window. The door handles, mirrors and the badges have to be removed before the panels are wrapped. The bumpers on this car wrap as separate pieces because they meet the body at a strong crease.

How much vinyl to wrap a Uno depends on the version of the body. The 1989 restyle kept the same overall length of 143.5 in (3,645 mm) but changed the bumper shapes and the light openings. A full wrap of the car takes about 43 ft (13 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 52 ft (16 m) because the pattern has to be matched across the panels.

Questions about wrapping a Fiat Uno

How much vinyl does it take to wrap a Fiat Uno?

A Fiat Uno takes about 43 ft (13 m) of 60-inch (1.52 m) cast film for a full wrap. This figure is based on the newest body with the 1989 bumpers and lights. A chrome or patterned film needs about 52 ft (16 m) because the pattern has to be matched panel by panel.

Which years of the Uno take the same film cuts?

The same film cuts fit an Uno before or after the 1989 restyling only within each version. Cars built from 1983 to 1989 share one set of bumper and light shapes. Cars built from 1989 to 2002 share another set, so a kit for one will not fit the other.

Can I wrap only the hood or the roof of a Uno?

Yes, you can wrap only the hood or the roof of a Uno. A partial wrap can also cover the mirror caps on their own. These jobs use less film than a full wrap and do not require removing the tailgate trim.

Is a Uno hard to wrap?

A Uno is not especially hard to wrap, but the tailgate with the rear glass in it adds work. The film must end exactly at the edge of the glass and wrap around a tight radius. The small body size of 143.5 in (3,645 mm) makes the roof and hood easier to handle than a larger car.