Wraps by car

Fiat X 1/9 wrap

The Fiat X 1/9 wrap covers one generation of this targa sports car, produced from 1972 to 1985. A full vinyl wrap of the newest body takes about 36 ft (11 m) of 60-inch (1.52 m) cast film. The X 1/9 is a small car with a targa top, so the wrap area is modest for a sports car.

1generations11 mof film for a full wrap

Fiat X 1/9, first generation, factory photo
Fiat X 1/9, first generation. Factory color shown.

Fiat X 1/9 wrap colors and ideas

  • X 1/9 black wrap
  • X 1/9 white wrap
  • X 1/9 gray wrap
  • X 1/9 silver wrap
  • X 1/9 red wrap
  • X 1/9 blue wrap
  • X 1/9 green wrap
  • X 1/9 yellow wrap
  • X 1/9 orange wrap
  • X 1/9 purple wrap
  • X 1/9 pink wrap
  • X 1/9 teal wrap
  • X 1/9 brown wrap
  • X 1/9 gold wrap
  • X 1/9 chrome wrap
  • X 1/9 color shift wrap
  • X 1/9 carbon fiber wrap
  • X 1/9 camo and patterned wrap

How much vinyl to wrap a Fiat X 1/9

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
1972–1985targa (2 doors)156.3 in (3,970 mm)about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m)

X 1/9 wrap cost factors

The X 1/9 wrap cost depends on the size of the car and the film finish, not on a fixed price list. A full wrap of the 156.3 in (3,970 mm) body needs about 36 ft (11 m) of 60-inch (1.52 m) cast film, while chrome or patterned film adds about 10 ft (3 m) more. The targa top reduces labor compared to a fixed roof car because the fabric top is not wrapped.

  • Film for a full wrap: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).
  • Body: targa (2 doors).
  • Targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

X 1/9 wraps by generation

Swipe sideways. Tap a card for the full description.

Fiat X 1/9, first generation, factory photo
Factory color shown

1972–1985 X 1/9 targa (first generation)

1972–1985targa (2 doors)156.3 in (3,970 mm)

The first generation Fiat X 1/9 has a targa top that stays unwrapped when the panel is fabric. The film ends where the fabric begins, leaving a clean edge along the roof opening. A folding hard top is wrapped as panels of its own, so it can match the body or contrast with it. This keeps the open-top function unchanged while the rest of the car is fully covered.

Targa body: a fabric top is not wrapped and the film ends where it begins; a folding hard top is wrapped as panels of its own.

Film: about 36 ft (11 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 46 ft (14 m).

Roof, hood, chrome delete and PPF on an X 1/9

An X 1/9 chrome delete covers the window trim and badges with black film, leaving the paint untouched. A partial wrap on the hood, mirror caps, and rear deck changes the look without a full body wrap. Paint protection film (PPF) on the front end is a clear option that adds no color but shields the nose from stone chips.

  • Partial wrap: hood, mirror caps, rear deck.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Fiat X 1/9: body, cut-outs and film

The Fiat X 1/9 vinyl wrap follows the single body style of this targa two-door. The car measures 156.3 in (3,970 mm) in length, and the film estimate is based on that size. A targa body means the roof section is removable, so the vinyl wrap stops where the top begins. The small dimensions keep the total film area lower than for many larger cars.

X 1/9 wrap ideas start with the targa body, where a fabric top is not wrapped and the film ends where it begins. A folding hard top is wrapped as panels of its own, so it can be covered in the same film or left unwrapped. The small doors and rear deck need careful trimming around handles and badges. Removing the top before wrapping gives cleaner edges along the roof line.

How much vinyl to wrap an X 1/9 stays the same across the only generation, from 1972 to 1985. The body length of 156.3 in (3,970 mm) sets the starting point for a full wrap, which takes about 36 ft (11 m) of 60-inch (1.52 m) cast film. If the film has a chrome or pattern finish, the estimate rises to about 46 ft (14 m) because of the need to match design elements.

Questions about wrapping a Fiat X 1/9

How much vinyl does it take to wrap a Fiat X 1/9?

A full wrap of a Fiat X 1/9 takes about 36 ft (11 m) of 60-inch (1.52 m) cast film. That figure applies to the newest body, which is the only generation from 1972 to 1985. If you choose a chrome or patterned film, the amount rises to about 46 ft (14 m).

Is the top of an X 1/9 wrapped?

No, the top of an X 1/9 is not wrapped when it is the standard fabric targa panel. The film ends where the fabric begins, so the open top stays uncovered. A folding hard top is wrapped as panels of its own, so that version can be covered.

Can I wrap only the hood or the roof of an X 1/9?

Yes, you can wrap only the hood, the mirror caps, or the rear deck of an X 1/9. A partial wrap of these areas is a common smaller job. You can also add a chrome delete on the window trim and badges or clear paint protection film on the front end.

Is an X 1/9 hard to wrap?

The X 1/9 adds some work because of its targa body and small size. The fabric top is not wrapped, so the film ends cleanly where the top begins, which takes careful trimming. A folding hard top is wrapped as panels of its own, adding more edges to finish. The 156.3 in (3,970 mm) length means tight curves around a compact sports car body.