Wraps by car

Great Wall C10 wrap

A Great Wall C10 wrap changes the look of this subcompact hatchback from the single generation built between 2010 and 2014. The five-door body is 150.0 in (3,810 mm) long and takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full vinyl wrap. A wrap with chrome or patterned film will need about 57 ft (17.5 m) of material. This page covers the body details, material quantities, and wrap ideas for the C10.

1generations15 mof film for a full wrap

Great Wall C10, first generation, factory photo
Great Wall C10, first generation. Factory color shown.

Great Wall C10 wrap colors and ideas

  • Great Wall C10 black wrap
  • Great Wall C10 white wrap
  • Great Wall C10 gray wrap
  • Great Wall C10 silver wrap
  • Great Wall C10 red wrap
  • Great Wall C10 blue wrap
  • Great Wall C10 green wrap
  • Great Wall C10 yellow wrap
  • Great Wall C10 orange wrap
  • Great Wall C10 purple wrap
  • Great Wall C10 pink wrap
  • Great Wall C10 teal wrap
  • Great Wall C10 brown wrap
  • Great Wall C10 gold wrap
  • Great Wall C10 chrome wrap
  • Great Wall C10 color shift wrap
  • Great Wall C10 carbon fiber wrap
  • Great Wall C10 camo and patterned wrap

How much vinyl to wrap a Great Wall C10

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–2014hatchback (5 doors)150.0 in (3,810 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Great Wall C10 wrap cost factors

A Great Wall C10 wrap cost is set by the amount of film, the film type, and the labor for the body details, not by a fixed price. The car is 150.0 in (3,810 mm) long and needs about 49 ft (15 m) of standard cast film, or about 57 ft (17.5 m) for chrome or patterned film. The tailgate with integrated glass, the sunroof opening, and the fog lamp cut-outs all add trimming time. A partial job on the roof or hood uses less material and less labor than a full wrap.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a sunroof: the roof film is cut around its opening.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Great Wall C10 wraps by generation

Swipe sideways. Tap a card for the full description.

Great Wall C10, first generation, factory photo
Factory color shown

2010–2014 Great Wall C10 hatchback (first generation)

2010–2014hatchback (5 doors)150.0 in (3,810 mm)

The first generation Great Wall C10 from 2010–2014 is the only body style in the catalog, a five-door hatchback. The car is 150.0 in (3,810 mm) long and takes about 49 ft (15 m) of 60-inch (1.52 m) cast film for a full wrap. Paint age matters on a car of these years: panels may be original or repainted, and a test spot comes before a full wrap to check adhesion. Every trim level includes a sunroof and fog lamps, which add cut-outs to the roof and bumper film.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a sunroof: the roof film is cut around its opening.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Great Wall C10

Partial wrap options for the Great Wall C10 include the roof, hood, and mirror caps for a smaller color change. A chrome delete covers the window trim and badges with black film for a cleaner look. Paint protection film (PPF) can be applied as clear film on the front end to guard against stone chips. These jobs use less film than a full wrap and focus on high-impact or high-visibility areas.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Great Wall C10: body, cut-outs and film

A Great Wall C10 vinyl wrap works with one body style: a five-door hatchback measuring 150.0 in (3,810 mm) in length. The small footprint keeps the wrap area compact, but the tall hatch opening and rear pillars still require careful film planning. The five doors mean more door handles and shut lines to work around than on a three-door car. A full wrap on this subcompact body uses about 49 ft (15 m) of standard 60-inch (1.52 m) cast film.

Great Wall C10 wrap ideas start with the details that make this hatchback different to wrap. The tailgate has the rear glass set into it, so the film must end cleanly at the glass edge. Every trim level has a sunroof, and the roof film is cut around its opening rather than laid over the panel. The front bumper carries fog lamps on every trim, so the installer cuts openings in the bumper film for these lights.

How much vinyl to wrap a Great Wall C10 depends on the film type and the installer's waste factor, but the catalog lists one generation: 2010–2014. The hatchback body is 150.0 in (3,810 mm) long, and a full wrap takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. If the wrap uses chrome or patterned film, the estimate rises to about 57 ft (17.5 m) because pattern matching and directional material create more offcuts. There are no other generations to compare, so these figures stay the same for every C10 from this period.

Questions about wrapping a Great Wall C10

How much vinyl does it take to wrap a Great Wall C10?

A full wrap of a Great Wall C10 takes about 49 ft (15 m) of 60-inch (1.52 m) cast film. If the wrap uses chrome or patterned film, the estimate is about 57 ft (17.5 m) because of extra trimming and pattern matching. These figures come from the film estimate for the newest body, the 2010–2014 hatchback. The amount can vary slightly with the installer's cutting plan and waste factor.

Can the roof of a Great Wall C10 be wrapped?

Yes, the roof of a Great Wall C10 can be wrapped, and it is a common partial job. Every trim has a sunroof, so the roof film must be cut precisely around the sunroof opening. The roof panel is part of the 150.0 in (3,810 mm) long hatchback body and uses less film than a full wrap. A roof wrap can be done in a contrasting color or gloss black as a standalone change.

Can I wrap only the hood or the roof of a Great Wall C10?

Yes, you can wrap only the hood or the roof of a Great Wall C10; these are listed as partial wrap options. The partial jobs on this car include the roof, hood, and mirror caps, as well as chrome delete and paint protection film. Wrapping only the hood or roof uses a fraction of the material needed for a full wrap. The sunroof opening on every trim means the roof film needs a clean cut-out around the glass.

Is a Great Wall C10 hard to wrap?

A Great Wall C10 is not hard to wrap because of its size, but some details add labor: the tailgate with integrated rear glass, the sunroof cut-out, and the fog lamp openings. The car is 150.0 in (3,810 mm) long, so the panels are small and manageable for one installer. The rear glass inside the tailgate means the film edge must be trimmed to the glass line, which takes time. The sunroof and fog lamps require precise cut-outs, but they are standard details for an experienced installer.