Wraps by car

Great Wall Hover M2 wrap

The Great Wall Hover M2 wrap page covers the five-door wagon sold in 2013 and 2014. This catalog lists one generation of the Hover M2, a compact SUV with a short overall length. A full vinyl wrap of the newest body takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the estimate to about 64 ft (19.5 m).

1generations17 mof film for a full wrap

Great Wall Hover M2, first generation, factory photo
Great Wall Hover M2, first generation. Factory color shown.

Great Wall Hover M2 wrap colors and ideas

  • Hover M2 black wrap
  • Hover M2 white wrap
  • Hover M2 gray wrap
  • Hover M2 silver wrap
  • Hover M2 red wrap
  • Hover M2 blue wrap
  • Hover M2 green wrap
  • Hover M2 yellow wrap
  • Hover M2 orange wrap
  • Hover M2 purple wrap
  • Hover M2 pink wrap
  • Hover M2 teal wrap
  • Hover M2 brown wrap
  • Hover M2 gold wrap
  • Hover M2 chrome wrap
  • Hover M2 color shift wrap
  • Hover M2 carbon fiber wrap
  • Hover M2 camo and patterned wrap

How much vinyl to wrap a Great Wall Hover M2

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–2014wagon (5 doors)157.9 in (4,011 mm)about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m)

Hover M2 wrap cost factors

Hover M2 wrap cost depends on the film chosen, the number of cut-outs, and the body size of 157.9 in (4,011 mm). A full wrap needs about 56 ft (17 m) of cast film, or about 64 ft (19.5 m) of chrome or patterned film. Extra work on the sunroof, roof rails, or parking sensors changes the labor. A partial wrap covers less area and uses less film than the full estimate.

  • Film for a full wrap: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).
  • Body: wagon (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Hover M2 wraps by generation

Swipe sideways. Tap a card for the full description.

Great Wall Hover M2, first generation, factory photo
Factory color shown

2013–2014 Hover M2 wagon (first generation)

2013–2014wagon (5 doors)157.9 in (4,011 mm)

The first generation Great Wall Hover M2 from 2013 and 2014 has roof rails on some trims only. The roof rails come off before the roof is wrapped, or the film is cut along them. Removing the rails gives a cleaner edge, but the installer must account for the mounting points. Cutting around them saves time, yet the film edge sits close to the rail feet.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 56 ft (17 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 64 ft (19.5 m).

Roof, hood, chrome delete and PPF on a Hover M2

Partial wrap options for the Hover M2 include the roof, hood, and mirror caps as separate vinyl jobs. Hover M2 chrome delete covers the window trim, decorative moldings, and badges with black film. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use less film and focus on one area of the car.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Great Wall Hover M2: body, cut-outs and film

The Great Wall Hover M2 vinyl wrap uses the wagon body, length of 157.9 in (4,011 mm), and five doors. The short length means less film for the sides than a longer SUV needs. Five doors add cut lines around each handle and the rear tailgate. A single body style makes film planning straightforward for this car.

Hover M2 wrap ideas begin with the rear tailgate, where the film ends at the edge of the glass. Some trims have a sunroof, and the roof film is cut around its opening. Some trims have roof rails that come off before the roof is wrapped, or the film is cut along them. Bright decorative moldings on some trims stay bright next to the film unless a chrome delete covers them.

How much vinyl to wrap a Hover M2 depends on the film type and the body length of 157.9 in (4,011 mm). Cast film needs about 56 ft (17 m) of 60-inch (1.52 m) width for this one generation. Chrome or patterned film adds around 8 ft (2.5 m) because the pattern must line up. The single body style in the catalog keeps the estimate the same for every year.

Questions about wrapping a Great Wall Hover M2

How much vinyl does it take to wrap a Great Wall Hover M2?

Yes, a full wrap takes about 56 ft (17 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 64 ft (19.5 m) for the newest body of the Great Wall Hover M2.

Can the roof of a Hover M2 be wrapped?

Yes, the roof of a Hover M2 can be wrapped as a single panel. Some trims have a sunroof, so the film is cut around its opening. Some trims have roof rails that come off before the roof is wrapped, or the film is cut along them.

Can I wrap only the hood or the roof of a Hover M2?

Yes, you can wrap only the hood or the roof of a Hover M2. A partial wrap of the roof, hood, and mirror caps is one option, while chrome delete covers the window trim, decorative moldings, and badges.

Is a Hover M2 hard to wrap?

A Hover M2 is not hard to wrap, but some parts add work. Every trim has fog lamps in the front bumper, so cut-outs in the bumper film are required. Some trims have parking sensors in the bumpers, where the film is cut around each sensor. A tailgate with the rear glass in it makes the film end at the edge of the glass.