Wraps by car

Great Wall Florid wrap

A Great Wall Florid wrap covers the 5-door hatchback produced from 2010 to 2012. The catalog has one generation for this subcompact car. A full vinyl wrap of the newest body takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film.

1generations15.5 mof film for a full wrap

Great Wall Florid, first generation, factory photo
Great Wall Florid, first generation. Factory color shown.

Great Wall Florid wrap colors and ideas

  • Florid black wrap
  • Florid white wrap
  • Florid gray wrap
  • Florid silver wrap
  • Florid red wrap
  • Florid blue wrap
  • Florid green wrap
  • Florid yellow wrap
  • Florid orange wrap
  • Florid purple wrap
  • Florid pink wrap
  • Florid teal wrap
  • Florid brown wrap
  • Florid gold wrap
  • Florid chrome wrap
  • Florid color shift wrap
  • Florid carbon fiber wrap
  • Florid camo and patterned wrap

How much vinyl to wrap a Great Wall Florid

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–2012hatchback (5 doors)153.8 in (3,907 mm)about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m)

Florid wrap cost factors

Florid wrap cost depends on the condition of the panels, since this generation is now over a decade old. Repainted areas may need extra preparation before a color change wrap. The compact size and single body style keep the surface area moderate for installers.

  • Film for a full wrap: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).
  • Body: hatchback (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Florid wraps by generation

Swipe sideways. Tap a card for the full description.

Great Wall Florid, first generation, factory photo
Factory color shown

2010–2012 Florid hatchback (first generation)

2010–2012hatchback (5 doors)153.8 in (3,907 mm)

The first generation Great Wall Florid was built from 2010 to 2012. On a car of these years, panels may be original or repainted, so installers test a spot before a full wrap. This step checks whether the film will bond evenly to the existing paint.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 51 ft (15.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 59 ft (18 m).

Roof, hood, chrome delete and PPF on a Florid

A partial wrap on a Florid can cover the roof, hood, or mirror caps. For a Florid chrome delete, the window trim and badges can be covered with black film. Paint protection film (PPF) is also an option for clear film on the front end.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Great Wall Florid: body, cut-outs and film

The Great Wall Florid vinyl wrap benefits from the car's single 5-door hatchback body style. Its compact length of 153.8 in (3,907 mm) keeps the wrap area smaller than on longer vehicles. Installers can work around the tailgate as one large rear panel.

Florid wrap ideas often focus on the tailgate, where the rear glass is integrated. The film ends neatly at the edge of the glass, leaving the glass clear. This allows a color change on the metal tailgate without overlaying the window.

When estimating how much vinyl to wrap a Florid, count only the one body style made in these years. No extended-roof or sedan variant exists, so the film amount stays the same for this generation. The car's small size keeps the total material requirement low.

Questions about wrapping a Great Wall Florid

How much vinyl does it take to wrap a Great Wall Florid?

It takes about 51 ft (15.5 m) of 60-inch (1.52 m) cast film to wrap a Great Wall Florid. If you use chrome or patterned film, plan for about 59 ft (18 m). The larger figure accounts for pattern matching and extra waste on the curves.

Can I wrap only the hood or the roof of a Florid?

Yes, you can wrap only the hood or the roof of a Florid. Installers also do mirror caps as a small partial wrap. A chrome delete on the window trim and badges is another smaller job.

Is a Florid hard to wrap?

A Florid is not especially hard to wrap, but the tailgate adds a step. The rear glass is set into the tailgate, so the film must be trimmed precisely at the glass edge. The car's short length and simple hatch shape keep the rest of the job straightforward.

How many generations of the Florid does this page cover?

This page covers one generation of the Great Wall Florid. It is the only generation listed in the catalog, produced from 2010 to 2012.