Wraps by car

Great Wall Hover H3 wrap

This page covers a Great Wall Hover H3 wrap, a vinyl wrap for the SUV built from 2010 to 2016. The catalog has one generation of this vehicle. A full wrap of the newest body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film.

1generations18.5 mof film for a full wrap

Great Wall Hover H3, first generation, factory photo
Great Wall Hover H3, first generation. Factory color shown.

Great Wall Hover H3 wrap colors and ideas

  • Hover H3 black wrap
  • Hover H3 white wrap
  • Hover H3 gray wrap
  • Hover H3 silver wrap
  • Hover H3 red wrap
  • Hover H3 blue wrap
  • Hover H3 green wrap
  • Hover H3 yellow wrap
  • Hover H3 orange wrap
  • Hover H3 purple wrap
  • Hover H3 pink wrap
  • Hover H3 teal wrap
  • Hover H3 brown wrap
  • Hover H3 gold wrap
  • Hover H3 chrome wrap
  • Hover H3 color shift wrap
  • Hover H3 carbon fiber wrap
  • Hover H3 camo and patterned wrap

How much vinyl to wrap a Great Wall Hover H3

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2010–2016SUV (5 doors)181.9 in (4,620 mm) to 183.1 in (4,650 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Hover H3 wrap cost factors

The Hover H3 wrap cost depends on the size of the vehicle and the film you choose. The body needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film takes about 72 ft (22 m). The installer's labor also affects the cost, especially for a tall roof.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (70.9 in (1,800 mm)): the roof is wrapped from a platform.
  • Restyled in 2014: bumpers and lights differ between the versions, and so do the film cuts.

Hover H3 wraps by generation

Swipe sideways. Tap a card for the full description.

Great Wall Hover H3, first generation, factory photo
Factory color shown

2010–2016 Hover H3 SUV (first generation)

2010–2016SUV (5 doors)181.9 in (4,620 mm) to 183.1 in (4,650 mm)

The first generation of the Great Wall Hover H3 was a five-door SUV built from 2010 to 2016. The body was restyled in 2014 with new bumpers and lights. Because of that change, a film pattern cut for an earlier version does not fit the later one. The overall body size stayed near 183 in (4,650 mm) long.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (70.9 in (1,800 mm)): the roof is wrapped from a platform.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Hover H3

Smaller jobs on this SUV include a partial wrap of the roof, hood, or mirror caps. A Hover H3 chrome delete covers the window trim, decorative moldings, and badges with black film. Paint protection film (PPF) can be applied as a clear film on the front end. These options do not require the amount of film for a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Great Wall Hover H3: body, cut-outs and film

A Great Wall Hover H3 vinyl wrap must cover a five-door SUV with a tall body. The body is 70.9 in (1,800 mm) high, so the roof is wrapped from a platform. The length ranges from 181.9 in (4,620 mm) to 183.1 in (4,650 mm). The size means a full wrap uses more film than a small hatchback.

Hover H3 wrap ideas include planning for the parts that need cut-outs or come off. The tailgate has the rear glass in it, so the film ends at the edge of the glass. Every trim has roof rails, and they come off before the roof is wrapped or the film is cut along them. Some trims have a sunroof, and the roof film is cut around its opening.

How much vinyl to wrap a Hover H3 changes little between the years. The first generation ran without major body changes from 2010 to 2016. A restyling in 2014 altered the bumpers and lights. Film cut for one version does not fit the other.

Questions about wrapping a Great Wall Hover H3

How much vinyl does it take to wrap a Great Wall Hover H3?

It takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film to wrap a Great Wall Hover H3. Chrome or patterned film needs about 72 ft (22 m). These figures are for the newest body of the first generation.

Can the roof of a Hover H3 be wrapped?

Yes, the roof of a Hover H3 can be wrapped. The roof is tall, so an installer uses a platform. Every trim has roof rails that come off or the film is cut along them. Some trims have a sunroof, so the film is cut around its opening.

Which years of the Hover H3 take the same film cuts?

The years 2010 to 2013 take the same film cuts, and 2014 to 2016 take the same different cuts. The restyling in 2014 changed the bumpers and lights. Therefore, film cut for one version does not fit the other.

Can I wrap only the hood or the roof of a Hover H3?

Yes, you can wrap only the hood or the roof of a Hover H3. A partial wrap can cover the roof, hood, or mirror caps. A chrome delete covers the window trim, decorative moldings, and badges. Paint protection film (PPF) can also be applied only to the front end.