Wraps by car

Great Wall Hover M1 (Peri 4x4) wrap

The Great Wall Hover M1 (Peri 4x4) wrap is a vinyl wrap applied to a small first-generation SUV offered from 2008 to 2010. This page covers one generation and the film needed for a full wrap of the newest body. A full wrap takes about 49 ft (15 m) of 60-inch (1.52 m) cast film.

1generations15 mof film for a full wrap

Great Wall Hover M1 (Peri 4x4), first generation, factory photo
Great Wall Hover M1 (Peri 4x4), first generation. Factory color shown.

Great Wall Hover M1 (Peri 4x4) wrap colors and ideas

  • Hover M1 (Peri 4x4) black wrap
  • Hover M1 (Peri 4x4) white wrap
  • Hover M1 (Peri 4x4) gray wrap
  • Hover M1 (Peri 4x4) silver wrap
  • Hover M1 (Peri 4x4) red wrap
  • Hover M1 (Peri 4x4) blue wrap
  • Hover M1 (Peri 4x4) green wrap
  • Hover M1 (Peri 4x4) yellow wrap
  • Hover M1 (Peri 4x4) orange wrap
  • Hover M1 (Peri 4x4) purple wrap
  • Hover M1 (Peri 4x4) pink wrap
  • Hover M1 (Peri 4x4) teal wrap
  • Hover M1 (Peri 4x4) brown wrap
  • Hover M1 (Peri 4x4) gold wrap
  • Hover M1 (Peri 4x4) chrome wrap
  • Hover M1 (Peri 4x4) color shift wrap
  • Hover M1 (Peri 4x4) carbon fiber wrap
  • Hover M1 (Peri 4x4) camo and patterned wrap

How much vinyl to wrap a Great Wall Hover M1 (Peri 4x4)

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2008–2010SUV (5 doors)143.5 in (3,645 mm)about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m)

Hover M1 (Peri 4x4) wrap cost factors

The Hover M1 (Peri 4x4) wrap cost depends on the film amount and the bodywork. One generation with one body style keeps the film estimate stable at about 49 ft (15 m) for standard film. Paint condition matters on a car from 2008–2010 because panels may be original or repainted. A test spot before the full wrap adds a step but not a large cost.

  • Film for a full wrap: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.

Hover M1 (Peri 4x4) wraps by generation

Swipe sideways. Tap a card for the full description.

Great Wall Hover M1 (Peri 4x4), first generation, factory photo
Factory color shown

2008–2010 Hover M1 (Peri 4x4) SUV (first generation)

2008–2010SUV (5 doors)143.5 in (3,645 mm)

The first generation Great Wall Hover M1 (Peri 4x4) was built from 2008 to 2010 as a five-door SUV. On a car of these years, panels may be original or repainted. A test spot comes before a full wrap to check how the vinyl adheres. This step is important because paint age varies on this generation.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Film: about 49 ft (15 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 57 ft (17.5 m).

Roof, hood, chrome delete and PPF on a Hover M1 (Peri 4x4)

The Hover M1 (Peri 4x4) takes several partial wrap jobs for smaller coverage. A partial wrap can cover the roof, hood, or mirror caps. A chrome delete wraps the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end of this SUV.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Great Wall Hover M1 (Peri 4x4): body, cut-outs and film

The body styles and size of the Great Wall Hover M1 (Peri 4x4) vinyl wrap are straightforward. It is a five-door SUV with a length of 143.5 in (3,645 mm). This compact footprint means fewer panels than a larger truck, so less film is used. The tailgate includes the rear glass, so the film stops at its edge.

Hover M1 (Peri 4x4) wrap ideas focus on one detail. The tailgate with the rear glass in it needs the film trimmed at the edge of the glass. Wrapping around the glass edge is not done on this car, so the installer must cut cleanly. This keeps the film from lifting at the glass.

How much vinyl to wrap a Hover M1 (Peri 4x4) depends on the film type and the generation. The first generation is the only one, so the figures stay the same for every year. A standard cast film needs about 49 ft (15 m), while chrome or patterned film needs about 57 ft (17.5 m).

Questions about wrapping a Great Wall Hover M1 (Peri 4x4)

How much vinyl does it take to wrap a Great Wall Hover M1 (Peri 4x4)?

About 49 ft (15 m) of 60-inch (1.52 m) cast film is needed to wrap a Great Wall Hover M1 (Peri 4x4). For chrome or patterned film, the estimate is about 57 ft (17.5 m). These figures come from the newest body, which is the only generation in the catalog.

Can I wrap only the hood or the roof of a Hover M1 (Peri 4x4)?

Yes, you can wrap only the hood or the roof of a Hover M1 (Peri 4x4). The partial wrap listed for this car includes the roof, hood, and mirror caps. You can choose just one of those panels for a smaller job.

Is a Hover M1 (Peri 4x4) hard to wrap?

A Hover M1 (Peri 4x4) is not very hard to wrap because it is a small five-door SUV. The tailgate with the rear glass in it adds work because the film must be trimmed at the edge of the glass. The length of 143.5 in (3,645 mm) means fewer panels compared to larger vehicles.

How many generations of the Hover M1 (Peri 4x4) does this page cover?

This page covers one generation of the Hover M1 (Peri 4x4). The first generation was produced from 2008 to 2010 and is the only one in the catalog.