Wraps by car

Great Wall Hover Pi wrap

This page covers the Great Wall Hover Pi wrap with one generation from 2006 to 2010. The car is a five-door sedan that is 264.6 in (6,720 mm) long. A full vinyl wrap of the newest body takes about 80 ft (24.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film needs about 90 ft (27.5 m).

1generations24.5 mof film for a full wrap

Great Wall Hover Pi, first generation, factory photo
Great Wall Hover Pi, first generation. Factory color shown.

Great Wall Hover Pi wrap colors and ideas

  • Hover Pi black wrap
  • Hover Pi white wrap
  • Hover Pi gray wrap
  • Hover Pi silver wrap
  • Hover Pi red wrap
  • Hover Pi blue wrap
  • Hover Pi green wrap
  • Hover Pi yellow wrap
  • Hover Pi orange wrap
  • Hover Pi purple wrap
  • Hover Pi pink wrap
  • Hover Pi teal wrap
  • Hover Pi brown wrap
  • Hover Pi gold wrap
  • Hover Pi chrome wrap
  • Hover Pi color shift wrap
  • Hover Pi carbon fiber wrap
  • Hover Pi camo and patterned wrap

How much vinyl to wrap a Great Wall Hover Pi

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2006–2010sedan (5 doors)264.6 in (6,720 mm)about 80 ft (24.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m)

Hover Pi wrap cost factors

Hover Pi wrap cost depends on the amount of film and the labor for this long, tall body. The car needs about 80 ft (24.5 m) of 60-inch (1.52 m) film for a standard color change. A chrome or patterned film uses about 90 ft (27.5 m), which raises the material cost. The tall roof adds time because it is wrapped from a platform.

  • Film for a full wrap: about 80 ft (24.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m).
  • Body: sedan (5 doors).
  • A tall body (69.5 in (1,765 mm)): the roof is wrapped from a platform.

Hover Pi wraps by generation

Swipe sideways. Tap a card for the full description.

Great Wall Hover Pi, first generation, factory photo
Factory color shown

2006–2010 Hover Pi sedan (first generation)

2006–2010sedan (5 doors)264.6 in (6,720 mm)

The first generation Hover Pi (2006–2010) is a sedan with a tall body at 69.5 in (1,765 mm). The roof height means a wrap installer works from a platform, which adds time. The panels are large and flat, so the main challenge is the height and the length of the roof.

A tall body (69.5 in (1,765 mm)): the roof is wrapped from a platform.

Film: about 80 ft (24.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 90 ft (27.5 m).

Roof, hood, chrome delete and PPF on a Hover Pi

A partial wrap on the Hover Pi can cover the roof, hood, or mirror caps with less film. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to guard against stone chips. These smaller jobs let you change the look without a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Great Wall Hover Pi: body, cut-outs and film

A Great Wall Hover Pi vinyl wrap has to cover a very long sedan body at 264.6 in (6,720 mm). The body style is a five-door sedan, so the four side doors and the tailgate add seams and edges. The roof is tall at 69.5 in (1,765 mm) and adds surface area. This size means a full wrap is a big job that uses most of a standard roll.

Hover Pi wrap ideas need to include the tall roof, which is wrapped from a platform. The door handles, badges, and trim should come off for a clean install. Cut-outs are needed around the mirrors, lights, and door edges. The height of the body makes the roof the most time-consuming panel.

How much vinyl to wrap a Hover Pi depends on the film width and the pattern. The estimate is about 80 ft (24.5 m) of 60-inch (1.52 m) cast film for a full wrap. A chrome or patterned film takes about 90 ft (27.5 m) because the pattern must match. The catalog has one generation, so the amount is the same for all years 2006–2010.

Questions about wrapping a Great Wall Hover Pi

How much vinyl does it take to wrap a Great Wall Hover Pi?

A full wrap of a Great Wall Hover Pi takes about 80 ft (24.5 m) of 60-inch (1.52 m) cast film. For chrome or patterned film, the amount is about 90 ft (27.5 m). The tall body and long sedan shape cause the higher film use.

Can I wrap only the hood or the roof of a Hover Pi?

Yes, you can wrap only the hood or the roof of a Hover Pi. A partial wrap often covers the roof, hood, or mirror caps. The tall roof is wrapped from a platform and takes more time. A hood-only wrap is a smaller job that changes the front look.

Is a Hover Pi hard to wrap?

A Hover Pi is not the easiest car to wrap because of its tall body. The roof is at 69.5 in (1,765 mm) and must be wrapped from a platform. The sedan is very long at 264.6 in (6,720 mm), which adds film and seams. These factors add time and labor to a full wrap.

How many generations of the Hover Pi does this page cover?

This page covers one generation of the Hover Pi, from 2006 to 2010. The catalog has no other generations of this car. All information here applies to that single generation.