Wraps by car

Great Wall Hover H5 wrap

This page covers the Great Wall Hover H5 wrap, a large five-door SUV produced from 2011 to 2016. The catalog has one generation of this model. A full color change wrap of the body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast vinyl film.

1generations18.5 mof film for a full wrap

Great Wall Hover H5, first generation, factory photo
Great Wall Hover H5, first generation. Factory color shown.

Great Wall Hover H5 wrap colors and ideas

  • Hover H5 black wrap
  • Hover H5 white wrap
  • Hover H5 gray wrap
  • Hover H5 silver wrap
  • Hover H5 red wrap
  • Hover H5 blue wrap
  • Hover H5 green wrap
  • Hover H5 yellow wrap
  • Hover H5 orange wrap
  • Hover H5 purple wrap
  • Hover H5 pink wrap
  • Hover H5 teal wrap
  • Hover H5 brown wrap
  • Hover H5 gold wrap
  • Hover H5 chrome wrap
  • Hover H5 color shift wrap
  • Hover H5 carbon fiber wrap
  • Hover H5 camo and patterned wrap

How much vinyl to wrap a Great Wall Hover H5

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2016SUV (5 doors)183.0 in (4,649 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Hover H5 wrap cost factors

The Hover H5 wrap cost depends on the film area and the details you choose. A full color change wrap uses about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, while chrome or patterned film uses about 72 ft (22 m). Roof rails, parking sensors, cameras and fog lamps add time for removal or cut-outs.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Hover H5 wraps by generation

Swipe sideways. Tap a card for the full description.

Great Wall Hover H5, first generation, factory photo
Factory color shown

2011–2016 Hover H5 SUV (first generation)

2011–2016SUV (5 doors)183.0 in (4,649 mm)

The first generation of the Hover H5, built from 2011 to 2016, has roof rails on every trim. The installer removes the roof rails before wrapping the roof, or cuts the film along them if you prefer not to remove them. This choice affects how the roof film is finished.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Hover H5

For owners who do not want a full wrap, the Hover H5 offers smaller jobs: wrap the roof, hood or mirror caps. A chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to protect the paint from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Great Wall Hover H5: body, cut-outs and film

A Great Wall Hover H5 vinyl wrap is a single body style, a five-door SUV that is 183.0 in (4,649 mm) long. The tall sides and flat roof make the Hover H5 a straightforward shape for film. The length means the installer works around the vehicle several times to keep the film aligned.

Hover H5 wrap ideas start with planning the cut-outs and removals on this SUV. Every trim has roof rails that come off before the roof is wrapped, or the film is cut along them. The bumpers have parking sensors and fog lamps on every trim, so the film is cut around each sensor and lamp. Cameras in the body need a cut-out around each lens.

To work out how much vinyl to wrap a Hover H5, compare the film estimates for the generations in this catalog. There is one generation, listed as 2011–2016, so the figures do not change from year to year. A full wrap uses about 61 ft (18.5 m) of 60-inch film.

Questions about wrapping a Great Wall Hover H5

How much vinyl does it take to wrap a Great Wall Hover H5?

A Great Wall Hover H5 needs about 61 ft (18.5 m) of 60-inch (1.52 m) cast film for a full wrap. For chrome or patterned film, allow about 72 ft (22 m) because the pattern needs to be matched.

Can I wrap only the hood or the roof of a Hover H5?

Yes, you can wrap only the hood or the roof of a Hover H5. Partial wrap options on this model include the roof, hood and mirror caps, and many owners choose one of these panels for a color accent.

Is a Hover H5 hard to wrap?

A Hover H5 is not especially hard to wrap for a professional, but it has details that add time. Roof rails on every trim must be removed or cut around, and the bumpers have parking sensors and fog lamps that need cut-outs. Cameras in the body also need the film cut around each lens.

How many generations of the Hover H5 does this page cover?

This page covers one generation of the Hover H5, the first generation produced from 2011 to 2016.