Wraps by car

Great Wall Safe wrap

The Great Wall Safe wrap guide covers the first-generation SUV made from 2001 to 2009. A full wrap of this body takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast vinyl wrap. Using chrome or patterned film raises the amount to about 77 ft (23.5 m).

1generations18.5 mof film for a full wrap

Great Wall Safe, first generation, factory photo
Great Wall Safe, first generation. Factory color shown.

Great Wall Safe wrap colors and ideas

  • Safe black wrap
  • Safe white wrap
  • Safe gray wrap
  • Safe silver wrap
  • Safe red wrap
  • Safe blue wrap
  • Safe green wrap
  • Safe yellow wrap
  • Safe orange wrap
  • Safe purple wrap
  • Safe pink wrap
  • Safe teal wrap
  • Safe brown wrap
  • Safe gold wrap
  • Safe chrome wrap
  • Safe color shift wrap
  • Safe carbon fiber wrap
  • Safe camo and patterned wrap

How much vinyl to wrap a Great Wall Safe

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2001–2009SUV (5 doors)179.5 in (4,560 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m)

Safe wrap cost factors

Safe wrap cost depends on the size of the SUV and the film you choose. A standard color change wrap uses about 61 ft (18.5 m) of film, while chrome or patterned film needs about 77 ft (23.5 m). The tall body at 71.7 in (1,820 mm) adds labor because the roof is wrapped from a platform.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.
  • A tall body (71.7 in (1,820 mm)): the roof is wrapped from a platform.

Safe wraps by generation

Swipe sideways. Tap a card for the full description.

Great Wall Safe, first generation, factory photo
Factory color shown

2001–2009 Safe SUV (first generation)

2001–2009SUV (5 doors)179.5 in (4,560 mm)

The first generation Great Wall Safe has a tall body, so its roof is wrapped from a platform. This adds time and care compared with a lower vehicle. The height of 71.7 in (1,820 mm) means the installer works above shoulder level.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

A tall body (71.7 in (1,820 mm)): the roof is wrapped from a platform.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 77 ft (23.5 m).

Roof, hood, chrome delete and PPF on a Safe

A partial wrap on a Safe can cover the roof, hood, or mirror caps. Safe chrome delete covers the window trim and badges with black film. Paint protection film (PPF) offers clear film on the front end without changing the color.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Great Wall Safe: body, cut-outs and film

The Great Wall Safe vinyl wrap starts with one five-door SUV body style. Its length of 179.5 in (4,560 mm) and height of 71.7 in (1,820 mm) mean large panels and a roof that needs a platform. No other body style from this generation changes the film estimate.

Safe wrap ideas must account for the tailgate with rear glass in it. The film ends at the edge of that glass rather than wrapping into the frame. Every trim has fog lamps in the front bumper, so the bumper film needs cut-outs.

How much vinyl to wrap a Safe stays the same across the single generation listed here. The catalog only includes the first generation from 2001 to 2009. Someone counting film between generations will not find a second body to compare.

Questions about wrapping a Great Wall Safe

How much vinyl does it take to wrap a Great Wall Safe?

It takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film to wrap a Great Wall Safe. With chrome or patterned film, the estimate rises to about 77 ft (23.5 m).

Can I wrap only the hood or the roof of a Safe?

Yes, you can wrap only the hood or the roof of a Safe. A partial wrap includes the roof, hood, or mirror caps as separate jobs.

Is a Safe hard to wrap?

A Safe is not especially hard to wrap, but a few parts add work. The tailgate has rear glass in it, so the film ends at the edge of the glass. Every trim has fog lamps in the front bumper that require cut-outs in the film. Its roof is tall, so it is wrapped from a platform.

How many generations of the Safe does this page cover?

This page covers one generation of the Safe. The catalog only lists the first generation from 2001 to 2009.