Wraps by car

Great Wall Steed wrap

The Great Wall Steed wrap page covers two generations of this pickup and the film a full wrap takes. The catalog lists the first generation from 2006 to 2011 and the second from 2011 to 2016. A vinyl wrap of the newest body uses about 66 ft (20 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds roughly 6 ft (2 m) to that estimate.

2generations20 mof film for a full wrap

Great Wall Steed, second generation, factory photo
Great Wall Steed, second generation. Factory color shown.

Great Wall Steed wrap colors and ideas

  • Steed black wrap
  • Steed white wrap
  • Steed gray wrap
  • Steed silver wrap
  • Steed red wrap
  • Steed blue wrap
  • Steed green wrap
  • Steed yellow wrap
  • Steed orange wrap
  • Steed purple wrap
  • Steed pink wrap
  • Steed teal wrap
  • Steed brown wrap
  • Steed gold wrap
  • Steed chrome wrap
  • Steed color shift wrap
  • Steed carbon fiber wrap
  • Steed camo and patterned wrap

How much vinyl to wrap a Great Wall Steed

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2011–2016pickup (4 doors)199.2 in (5,060 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)
2006–2011pickup (4 doors)198.4 in (5,040 mm)about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m)

Steed wrap cost factors

Steed wrap cost depends on the size of the pickup and the film type. The second generation is 199.2 in (5,060 mm) long and the first is 198.4 in (5,040 mm), so material use is nearly the same. Chrome or patterned film requires about 72 ft (22 m), while standard cast film needs 66 ft (20 m) for the newest body. Labor is higher when the cab and bed are wrapped as two bodies.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).
  • Body: pickup (4 doors).
  • A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Steed wraps by generation

Swipe sideways. Tap a card for the full description.

Great Wall Steed, second generation, factory photo
Factory color shown

2011–2016 Steed pickup (second generation)

2011–2016pickup (4 doors)199.2 in (5,060 mm)

The second generation Steed, produced from 2011 to 2016, has a pickup bed that changes the wrap process. The cab and the bed are wrapped as two bodies, and the inside of the bed is never covered. Every trim of this generation has fog lamps in the front bumper, so the film needs cut-outs there. The length of 199.2 in (5,060 mm) sets the material estimate.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Great Wall Steed, first generation, factory photo
Factory color shown

2006–2011 Steed pickup (first generation)

2006–2011pickup (4 doors)198.4 in (5,040 mm)

The first generation Steed, built from 2006 to 2011, is a pickup where paint age matters before wrapping. Panels on a car of these years may be original or repainted, and a test spot confirms adhesion before a full wrap. The cab and the bed are wrapped as two bodies, with the bed interior left bare. This generation is 198.4 in (5,040 mm) long.

A pickup bed: the cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped.

Film: about 64 ft (19.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 72 ft (22 m).

Roof, hood, chrome delete and PPF on a Steed

Steed chrome delete covers the window trim and badges with black film. A partial wrap can include the roof, hood, or mirror caps. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These jobs use less material than a full wrap and can be done separately.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Great Wall Steed: body, cut-outs and film

A Great Wall Steed vinyl wrap treats the cab and the bed as two separate bodies. The second generation is 199.2 in (5,060 mm) long and the first is 198.4 in (5,040 mm), so the film is cut for each section. The pickup has four doors, which means the door handles and mirrors need careful trimming. The inside of the bed is left unwrapped.

Steed wrap ideas start with the parts that need cut-outs or removal. Every trim of the second generation has fog lamps in the front bumper, so the installer cuts openings in the bumper film. The cab and the bed are wrapped as two bodies, and the bed interior stays bare. Door handles and mirrors come off for a clean edge on all Steed years.

How much vinyl to wrap a Steed changes between the two generations. The second generation needs about 66 ft (20 m) of 60-inch (1.52 m) cast film, while the first generation uses about 64 ft (19.5 m). The difference is small because both are four-door pickups with similar lengths. Chrome or patterned film raises the total to about 72 ft (22 m) for either generation.

Questions about wrapping a Great Wall Steed

How much vinyl does it take to wrap a Great Wall Steed?

A full wrap of a Great Wall Steed takes about 66 ft (20 m) of 60-inch (1.52 m) cast film. That figure is for the second generation, the newest body in the catalog. Chrome or patterned film raises the amount to about 72 ft (22 m).

Is the bed of a Steed wrapped?

The bed of a Steed is not wrapped on the inside. The cab and the bed are wrapped as two bodies, but the bed interior stays bare. Only the exterior panels of the bed are covered.

Can I wrap only the hood or the roof of a Steed?

Yes, you can wrap only the hood or the roof of a Steed. A partial wrap lists the roof, hood, and mirror caps as separate jobs. Chrome delete and paint protection film (PPF) are also done without wrapping the whole pickup.

Is a Steed hard to wrap?

A Steed adds work because of its pickup bed and size. The cab and the bed are wrapped as two bodies, and the inside of the bed is not wrapped. The second generation has fog lamps in the front bumper, so cut-outs are needed. The length of 199.2 in (5,060 mm) or 198.4 in (5,040 mm) also increases material handling.