Wraps by car

Great Wall Hover M4 wrap

A Great Wall Hover M4 wrap covers this compact SUV with vinyl film on every painted panel. The catalog lists one generation of the Hover M4, produced from 2013 to 2016. A full wrap of the newest body takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. Chrome or patterned film raises the amount to about 61 ft (18.5 m).

1generations16.5 mof film for a full wrap

Great Wall Hover M4, first generation, factory photo
Great Wall Hover M4, first generation. Factory color shown.

Great Wall Hover M4 wrap colors and ideas

  • Hover M4 black wrap
  • Hover M4 white wrap
  • Hover M4 gray wrap
  • Hover M4 silver wrap
  • Hover M4 red wrap
  • Hover M4 blue wrap
  • Hover M4 green wrap
  • Hover M4 yellow wrap
  • Hover M4 orange wrap
  • Hover M4 purple wrap
  • Hover M4 pink wrap
  • Hover M4 teal wrap
  • Hover M4 brown wrap
  • Hover M4 gold wrap
  • Hover M4 chrome wrap
  • Hover M4 color shift wrap
  • Hover M4 carbon fiber wrap
  • Hover M4 camo and patterned wrap

How much vinyl to wrap a Great Wall Hover M4

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–2016SUV (5 doors)155.9 in (3,961 mm)about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m)

Hover M4 wrap cost factors

Hover M4 wrap cost depends on the film type, the amount of vinyl needed and the labor for the body details. The compact SUV takes about 54 ft (16.5 m) of cast film for a standard color change wrap. Chrome or patterned film raises the amount to about 61 ft (18.5 m), and textured films add installation time. Cut-outs for a sunroof, sensors, cameras and fog lamps add labor.

  • Film for a full wrap: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Hover M4 wraps by generation

Swipe sideways. Tap a card for the full description.

Great Wall Hover M4, first generation, factory photo
Factory color shown

2013–2016 Hover M4 SUV (first generation)

2013–2016SUV (5 doors)155.9 in (3,961 mm)

The first generation Great Wall Hover M4 has roof rails on some trims, and they affect the roof wrap. The rails come off before the roof is wrapped, or the film is cut along them. Leaving the rails in place makes the roof film fit around each mount. Removing them gives a cleaner edge but adds time to the job.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 54 ft (16.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 61 ft (18.5 m).

Roof, hood, chrome delete and PPF on a Hover M4

The Hover M4 chrome delete covers the bright window trim, decorative moldings and badges with black film. A partial wrap can cover just the roof, hood and mirror caps. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. These smaller jobs use less vinyl than a full wrap.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film for the front end, which can also go over a wrap.

Wrapping a Great Wall Hover M4: body, cut-outs and film

A Great Wall Hover M4 vinyl wrap has to fit one body style: a five-door SUV. The body length is 155.9 in (3,961 mm), which makes it a compact vehicle for vinyl work. The roof, hood, doors, fenders, bumpers and tailgate are the main surfaces to cover. The tailgate includes the rear glass, so the film stops at its edge.

Hover M4 wrap ideas begin with the parts that need extra attention during the job. Some trims have a sunroof, so the roof film is cut around its opening. Roof rails on some trims come off before the roof is wrapped, or the film is cut along them. Bright decorative moldings stay bright next to the film unless a chrome delete covers them. Parking sensors and cameras in the bumpers and body need cut-outs in the film.

How much vinyl to wrap a Hover M4 stays the same across the years because there is one generation in the catalog. The production run from 2013 to 2016 kept the same five-door SUV body style. The film estimate for a full wrap is about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. With chrome or patterned film, the estimate is about 61 ft (18.5 m).

Questions about wrapping a Great Wall Hover M4

How much vinyl does it take to wrap a Great Wall Hover M4?

A full Great Wall Hover M4 wrap takes about 54 ft (16.5 m) of 60-inch (1.52 m) cast film. That figure covers the SUV body without chrome or patterned film. With chrome or patterned film, the amount is about 61 ft (18.5 m).

Can the roof of a Hover M4 be wrapped?

Yes, the roof of a Hover M4 can be wrapped on its own or as part of a full wrap. Some trims have a sunroof, so the roof film is cut around its opening. Roof rails on some trims come off before the roof is wrapped, or the film is cut along them.

Can I wrap only the hood or the roof of a Hover M4?

Yes, you can wrap only the hood or the roof of a Hover M4. A partial wrap job for this SUV covers the roof, hood and mirror caps. You can also choose a smaller job like a chrome delete or paint protection film on the front end.

Is a Hover M4 hard to wrap?

A Hover M4 is not the hardest SUV to wrap, but some details add work. The rear tailgate has the glass in it, so the film ends at the edge of the glass. Cut-outs are needed for parking sensors, cameras, fog lamps and a sunroof on some trims. The 155.9 in (3,961 mm) body length is compact, which keeps the main panels manageable.