Wraps by car

Infiniti EX wrap

This page covers the Infiniti EX, a first-generation SUV produced from 2007 to 2013. A full wrap of this vehicle takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film. The wrap details below help you plan the job accurately.

1generations18.5 mof film for a full wrap

Infiniti EX, first generation, factory photo
Infiniti EX, first generation. Factory color shown.

Infiniti EX wrap colors and ideas

  • Infiniti EX black wrap
  • Infiniti EX white wrap
  • Infiniti EX gray wrap
  • Infiniti EX silver wrap
  • Infiniti EX red wrap
  • Infiniti EX blue wrap
  • Infiniti EX green wrap
  • Infiniti EX yellow wrap
  • Infiniti EX orange wrap
  • Infiniti EX purple wrap
  • Infiniti EX pink wrap
  • Infiniti EX teal wrap
  • Infiniti EX brown wrap
  • Infiniti EX gold wrap
  • Infiniti EX chrome wrap
  • Infiniti EX color shift wrap
  • Infiniti EX carbon fiber wrap
  • Infiniti EX camo and patterned wrap

How much vinyl to wrap an Infiniti EX

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2007–2013SUV (5 doors)182.5 in (4,635 mm)about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Infiniti EX wrap cost factors

The Infiniti EX wrap cost is set by the size of the job, the film type, and the parts that need extra work. A full wrap uses about 61 ft (18.5 m) of 60-inch (1.52 m) cast film, or about 69 ft (21 m) for chrome or patterned film. Cut-outs around parking sensors, cameras, and fog lamps add labor, and roof rails may need removal or careful trimming.

  • Film for a full wrap: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Infiniti EX wraps by generation

Swipe sideways. Tap a card for the full description.

Infiniti EX, first generation, factory photo
Factory color shown

2007–2013 Infiniti EX SUV (first generation)

2007–2013SUV (5 doors)182.5 in (4,635 mm)

The first-generation Infiniti EX, built from 2007 to 2013 as the J50, has roof rails on every trim. For a wrap, the roof rails either come off before the roof film is applied, or the film is cut along them. This choice affects how the roof area is finished and how much time the job takes.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 61 ft (18.5 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on an Infiniti EX

For a smaller Infiniti EX chrome delete, the window trim, decorative moldings, and badges can be covered with black film. A partial wrap of the roof, hood, and mirror caps is another way to change the look without a full wrap. Paint protection film (PPF) in clear film on the front end shields the nose from stone chips.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Infiniti EX: body, cut-outs and film

The Infiniti EX is a five-door SUV with a body length of 182.5 in (4,635 mm). A single body style means the Infiniti EX vinyl wrap uses the same film amount for every car of this generation. The roof rails and tailgate glass are the main areas that shape how the vinyl is cut.

Infiniti EX wrap ideas must account for the tailgate with its rear glass, where the film ends at the edge of the glass. The roof rails are present on every trim and either come off for the wrap or have the film cut along them. Some trims have a sunroof, so the roof film is cut around its opening, and some trims have bright decorative moldings that stay bright unless a chrome delete is planned. Parking sensors, body cameras, and fog lamps all require precise cut-outs in the film.

Knowing how much vinyl to wrap an Infiniti EX depends on the generation, but only one exists for this model. First-generation cars from 2007 to 2013 all share the same body and wrap film estimate of about 61 ft (18.5 m). If chrome or patterned film is chosen, plan for about 69 ft (21 m) of 60-inch (1.52 m) film.

Questions about wrapping an Infiniti EX

How much vinyl does it take to wrap an Infiniti EX?

It takes about 61 ft (18.5 m) of 60-inch (1.52 m) cast film to wrap an Infiniti EX. For chrome or patterned film, the estimate is about 69 ft (21 m). These figures apply to the only generation of the Infiniti EX, produced from 2007 to 2013.

Can the roof of an Infiniti EX be wrapped?

Yes, the roof of an Infiniti EX can be wrapped. The roof rails are on every trim, so they are removed before the wrap or the film is cut along them. Some trims also have a sunroof, and the film is cut around its opening.

Can I wrap only the hood or the roof of an Infiniti EX?

Yes, you can wrap only the hood or the roof of an Infiniti EX as a partial wrap. A partial wrap can also cover the mirror caps. A chrome delete on the window trim, decorative moldings, and badges is another targeted option.

Is an Infiniti EX hard to wrap?

An Infiniti EX adds work to a wrap because of its size and details. The body is 182.5 in (4,635 mm) long and takes about 61 ft (18.5 m) of film. Cut-outs are needed for parking sensors, cameras, and fog lamps, and the roof rails must be handled carefully.