Wraps by car

Infiniti Q50 wrap

This page covers the Infiniti Q50 in its single generation, the V37 sedan made since 2014. A full Infiniti Q50 wrap takes about 59 ft (18 m) of 60-inch (1.52 m) cast film for a standard color change. Choosing chrome or patterned vinyl wrap raises the amount to about 69 ft (21 m). The figures include the whole body, with cut-outs for lights, sensors and cameras.

1generations18 mof film for a full wrap

Infiniti Q50, first generation, factory photo
Infiniti Q50, first generation. Factory color shown.

Infiniti Q50 wrap colors and ideas

  • Infiniti Q50 black wrap
  • Infiniti Q50 white wrap
  • Infiniti Q50 gray wrap
  • Infiniti Q50 silver wrap
  • Infiniti Q50 red wrap
  • Infiniti Q50 blue wrap
  • Infiniti Q50 green wrap
  • Infiniti Q50 yellow wrap
  • Infiniti Q50 orange wrap
  • Infiniti Q50 purple wrap
  • Infiniti Q50 pink wrap
  • Infiniti Q50 teal wrap
  • Infiniti Q50 brown wrap
  • Infiniti Q50 gold wrap
  • Infiniti Q50 chrome wrap
  • Infiniti Q50 color shift wrap
  • Infiniti Q50 carbon fiber wrap
  • Infiniti Q50 camo and patterned wrap

How much vinyl to wrap an Infiniti Q50

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2014–nowsedan (4 doors)188.6 in (4,790 mm) to 189.4 in (4,810 mm)about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m)

Infiniti Q50 wrap cost factors

Infiniti Q50 wrap cost depends on the amount and type of film, the number of cut-outs and the pieces of the car that must be removed. A full color change uses 59 ft (18 m) of standard cast film or 69 ft (21 m) of chrome or patterned film. Some trims add a styling kit, fog lamps or parking sensors, which means more separate pieces and more labor. The cost changes with the film brand and the shop, not with the year of the car.

  • Film for a full wrap: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).
  • Body: sedan (4 doors).
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.
  • Restyled in 2017: bumpers and lights differ between the versions, and so do the film cuts.

Infiniti Q50 wraps by generation

Swipe sideways. Tap a card for the full description.

Infiniti Q50, first generation, factory photo
Factory color shown

2014–now Infiniti Q50 sedan (first generation)

2014–nowsedan (4 doors)188.6 in (4,790 mm) to 189.4 in (4,810 mm)

The first generation Infiniti Q50 ran from 2014 to now as the V37 sedan, with a restyling in 2017. The restyling changed only the bumpers and lights, not the body sides, roof or doors. Film cut for a 2014–2016 front bumper will not fit a 2017-and-newer car, and the reverse is true. A shop must use the right pattern for the car's production year.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have a styling kit on the bumpers and sills: more separate pieces to wrap.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 59 ft (18 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 69 ft (21 m).

Roof, hood, chrome delete and PPF on an Infiniti Q50

Partial wrap jobs suit the Infiniti Q50 chrome delete and smaller changes without covering the whole car. You can wrap just the roof, hood or mirror caps to change one area. Chrome delete covers the window trim, decorative moldings and badges with black film. Paint protection film (PPF) is a clear film applied to the front end to protect the paint.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Infiniti Q50: body, cut-outs and film

The Infiniti Q50 vinyl wrap follows a mid-size four-door sedan shape from 188.6 in (4,790 mm) to 189.4 in (4,810 mm) long. One size fits every year, because the body style stays the same set of panels. The car has no extra roof or trunk shapes to add film beyond the listed estimate. Flat body sides make the vinyl go on with fewer relief cuts than a car with deep creases.

Infiniti Q50 wrap ideas start with the openings every trim carries in its bumpers and body. Cameras in the body and parking sensors in some trims need the film cut around each lens or dot. A sunroof on some trims means the roof film stops at its opening rather than covering the whole panel. Fog lamps on some trims add two more cut-outs in the front bumper film.

How much vinyl to wrap an Infiniti Q50 stays the same for every year of this generation. The only factory change came in 2017, a restyling of the bumpers and lights. That does not alter the total film amount, since the panel sizes are nearly identical. A wrap shop will use one film estimate for a 2014 and one for a 2024 car.

Questions about wrapping an Infiniti Q50

How much vinyl does it take to wrap an Infiniti Q50?

A full Infiniti Q50 wrap takes about 59 ft (18 m) of 60-inch (1.52 m) cast film. That figure covers a complete color change with no extra chrome or patterned material. If you choose chrome or patterned vinyl, the amount goes up to about 69 ft (21 m). The estimate includes the whole body and the film lost to cut-outs and trimming.

Can the roof of an Infiniti Q50 be wrapped?

Yes, the roof of an Infiniti Q50 can be wrapped. On some trims with a sunroof, the film is cut around its opening rather than laid over the glass. The roof is a flat panel, so a specialist can wrap it in one piece. A roof wrap is a partial job that leaves the rest of the paint unchanged.

Which years of the Infiniti Q50 take the same film cuts?

For the Infiniti Q50, every year from 2014 to now takes the same film cuts on the body except the bumpers and lights. The 2017 restyling changed those front and rear parts, so a 2014–2016 car and a 2017-and-newer car use different patterns for them. The doors, roof, hood and trunk are unchanged. A wrap shop will match the cut file to the car's production date.

Can I wrap only the hood or the roof of an Infiniti Q50?

Yes, you can wrap only the hood or the roof of an Infiniti Q50. Those panels are common partial wrap choices, along with the mirror caps. A shop can cut film for just one panel without buying material for the whole car. The same applies to chrome delete on the window trim and badges.