Wraps by car

Infiniti QX70 wrap

The Infiniti QX70 wrap needs about 66 ft (20 m) of 60-inch (1.52 m) cast film for the single 2013–2019 generation. A vinyl wrap in chrome or patterned film covers the same body in about 74 ft (22.5 m). The QX70 is a five-door SUV with only one body style in the catalog.

1generations20 mof film for a full wrap

Infiniti QX70, first generation, factory photo
Infiniti QX70, first generation. Factory color shown.

Infiniti QX70 wrap colors and ideas

  • Infiniti QX70 black wrap
  • Infiniti QX70 white wrap
  • Infiniti QX70 gray wrap
  • Infiniti QX70 silver wrap
  • Infiniti QX70 red wrap
  • Infiniti QX70 blue wrap
  • Infiniti QX70 green wrap
  • Infiniti QX70 yellow wrap
  • Infiniti QX70 orange wrap
  • Infiniti QX70 purple wrap
  • Infiniti QX70 pink wrap
  • Infiniti QX70 teal wrap
  • Infiniti QX70 brown wrap
  • Infiniti QX70 gold wrap
  • Infiniti QX70 chrome wrap
  • Infiniti QX70 color shift wrap
  • Infiniti QX70 carbon fiber wrap
  • Infiniti QX70 camo and patterned wrap

How much vinyl to wrap an Infiniti QX70

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2013–2019SUV (5 doors)191.5 in (4,865 mm)about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m)

Infiniti QX70 wrap cost factors

Infiniti QX70 wrap cost depends on film choice, labor for cut-outs, and whether the roof rails come off. The body length of 191.5 in (4,865 mm) and five-door shape add time to trim around panels, glass, sensors, cameras, and fog lamps. A chrome delete adds work on bright moldings, window trim, and badges. The amount of film stays at about 66 ft (20 m) for cast or about 74 ft (22.5 m) for chrome or patterned film.

  • Film for a full wrap: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Every trim has a sunroof: the roof film is cut around its opening.
  • Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.
  • Every trim has parking sensors in the bumpers: the film is cut around each sensor.
  • Every trim has cameras in the body: the film is cut around each lens.
  • Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Infiniti QX70 wraps by generation

Swipe sideways. Tap a card for the full description.

Infiniti QX70, first generation, factory photo
Factory color shown

2013–2019 Infiniti QX70 SUV (first generation)

2013–2019SUV (5 doors)191.5 in (4,865 mm)

The first generation Infiniti QX70 from 2013–2019 has roof rails that are removed before the roof is wrapped. If the rails stay on, the film is cut along them to keep a clean edge. The roof also has a sunroof on every trim, so the film is cut around its opening. This model uses the S51 body code in the catalog.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has a sunroof: the roof film is cut around its opening.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 66 ft (20 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 74 ft (22.5 m).

Roof, hood, chrome delete and PPF on an Infiniti QX70

An Infiniti QX70 chrome delete covers window trim, decorative moldings, and badges with black film. A partial wrap is a smaller job on the roof, hood, mirror caps, or any combination of those panels. Paint protection film (PPF) is clear film applied to the front end to guard against stone chips. Each option uses less film than a full wrap and can be limited to the areas you choose.

  • Partial wrap: roof, hood, mirror caps.
  • Chrome delete: window trim, decorative moldings and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Infiniti QX70: body, cut-outs and film

The Infiniti QX70 vinyl wrap covers the 191.5 in (4,865 mm) SUV body in one continuous job from panel to panel. A five-door shape adds doors and a tailgate, so installers cut film for every shut line and edge. The roof area is large enough that film must be laid in one wide piece from a 60-inch (1.52 m) roll. The body length means a full wrap uses close to the complete length of cast film estimated for this vehicle.

Infiniti QX70 wrap ideas should account for the tailgate with glass in it, where film ends at the edge of the glass. Every trim has a sunroof, so roof film is cut around its opening after the roof rails come off. Parking sensors in the bumpers and cameras in the body need cut-outs around each sensor and lens. Fog lamps in the front bumper also require cut-outs in the bumper film, and some bright moldings stay bright unless a chrome delete covers them.

How much vinyl to wrap an Infiniti QX70 stays the same because the catalog holds one generation from 2013–2019. The body size, 191.5 in (4,865 mm) long, sets the film estimate of about 66 ft (20 m) of 60-inch (1.52 m) cast film. Chrome or patterned film adds more for matching, totaling about 74 ft (22.5 m). With no second generation, there is no smaller or larger body to compare for film usage.

Questions about wrapping an Infiniti QX70

How much vinyl does it take to wrap an Infiniti QX70?

It takes about 66 ft (20 m) of 60-inch (1.52 m) cast film to wrap an Infiniti QX70. If you choose chrome or patterned film, the estimate rises to about 74 ft (22.5 m). Those figures cover the single 2013–2019 generation with its 191.5 in (4,865 mm) body length.

Can the roof of an Infiniti QX70 be wrapped?

Yes, the roof of an Infiniti QX70 can be wrapped, but the roof rails come off or the film is cut along them. Every trim has a sunroof, so the film is cut around its opening as well. A roof wrap is a common partial job on this SUV.

Can I wrap only the hood or the roof of an Infiniti QX70?

Yes, you can wrap only the hood or the roof of an Infiniti QX70. A partial wrap on this car typically covers the roof, hood, mirror caps, or a combination of those panels. Chrome delete is another partial option for window trim, decorative moldings, and badges.

Is an Infiniti QX70 hard to wrap?

Infiniti QX70 is not the hardest SUV to wrap, but it adds work with cut-outs for parking sensors, cameras, and fog lamps. The tailgate glass must be edged cleanly, and roof rails need removal or cutting along them. At 191.5 in (4,865 mm) long, it uses about 66 ft (20 m) of film, so planning panel order matters.