Wraps by car

Infiniti QX50 wrap

An Infiniti QX50 wrap is a color change or protection film on this five-door SUV. The catalog lists two generations of the QX50, and the newest body is the second generation from 2017 onward. A full wrap of the newest body takes about 62 ft (19 m) of 60-inch (1.52 m) cast vinyl wrap.

2generations19 mof film for a full wrap

Infiniti QX50, second generation, factory photo
Infiniti QX50, second generation. Factory color shown.

Infiniti QX50 wrap colors and ideas

  • Infiniti QX50 black wrap
  • Infiniti QX50 white wrap
  • Infiniti QX50 gray wrap
  • Infiniti QX50 silver wrap
  • Infiniti QX50 red wrap
  • Infiniti QX50 blue wrap
  • Infiniti QX50 green wrap
  • Infiniti QX50 yellow wrap
  • Infiniti QX50 orange wrap
  • Infiniti QX50 purple wrap
  • Infiniti QX50 pink wrap
  • Infiniti QX50 teal wrap
  • Infiniti QX50 brown wrap
  • Infiniti QX50 gold wrap
  • Infiniti QX50 chrome wrap
  • Infiniti QX50 color shift wrap
  • Infiniti QX50 carbon fiber wrap
  • Infiniti QX50 camo and patterned wrap

How much vinyl to wrap an Infiniti QX50

Estimates from the body dimensions in the catalog, for a 1.52 m (60 in) roll.

YearsBodyLengthFilm to order
2017–nowSUV (5 doors)184.8 in (4,693 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)
2013–2018SUV (5 doors)182.5 in (4,635 mm) to 186.8 in (4,745 mm)about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m)

Infiniti QX50 wrap cost factors

Infiniti QX50 wrap cost depends on the size of the body and the film you choose. A full wrap of the newest body needs about 62 ft (19 m) of film, and chrome or patterned film takes about 70 ft (21.5 m). The longer first generation is 182.5 in (4,635 mm) to 186.8 in (4,745 mm), so it may use a similar amount. Extra cut-outs for sensors, cameras, and roof rails also add labor time.

  • Film for a full wrap: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).
  • Body: SUV (5 doors).
  • A tailgate with the rear glass in it: the film ends at the edge of the glass.
  • Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.
  • Some trims have a sunroof: the roof film is cut around its opening.
  • Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.
  • Some trims have parking sensors in the bumpers: the film is cut around each sensor.
  • Some trims have cameras in the body: the film is cut around each lens.
  • Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Infiniti QX50 wraps by generation

Swipe sideways. Tap a card for the full description.

Infiniti QX50, second generation, factory photo
Factory color shown

2017–now Infiniti QX50 SUV (second generation)

2017–nowSUV (5 doors)184.8 in (4,693 mm)

The second generation Infiniti QX50 is the current body from 2017 onward. Some trims have a panoramic glass roof, which is not wrapped, so the roof stays dark whatever the color of the film. The glass panel is left exposed, and the film ends at the roof rails or along the glass edge. For a full wrap, the glass roof reduces the amount of film needed on top.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Some trims have a panoramic glass roof: glass is not wrapped, and the film ends at the roof rails.

Some trims have a sunroof: the roof film is cut around its opening.

Some trims have roof rails: they come off before the roof is wrapped, or the film is cut along them.

Some trims have parking sensors in the bumpers: the film is cut around each sensor.

Some trims have cameras in the body: the film is cut around each lens.

Some trims have fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Infiniti QX50, first generation, factory photo
Factory color shown

2013–2018 Infiniti QX50 SUV (first generation)

2013–2018SUV (5 doors)182.5 in (4,635 mm) to 186.8 in (4,745 mm)

The first generation Infiniti QX50 covers the 2013 to 2018 body. Its years overlap with the second generation from 2017 to 2018, so the owner of a car from those years checks which body it is. The first generation was restyled in 2015, with a length from 182.5 in (4,635 mm) to 186.8 in (4,745 mm). Every trim has roof rails and bright decorative moldings that affect the wrap.

A tailgate with the rear glass in it: the film ends at the edge of the glass.

Every trim has roof rails: they come off before the roof is wrapped, or the film is cut along them.

Every trim has bright decorative moldings: they stay bright next to the film unless a chrome delete covers them.

Every trim has parking sensors in the bumpers: the film is cut around each sensor.

Every trim has cameras in the body: the film is cut around each lens.

Every trim has fog lamps in the front bumper: cut-outs in the bumper film.

Film: about 62 ft (19 m) of 60-inch (1.52 m) cast film; chrome or patterned film: about 70 ft (21.5 m).

Roof, hood, chrome delete and PPF on an Infiniti QX50

A partial wrap on an Infiniti QX50 can cover the hood, mirror caps, or roof on cars without the glass panel. An Infiniti QX50 chrome delete covers the window trim and badges with black film. Paint protection film (PPF) is a clear film that protects the front end from stone chips. These smaller jobs use less film than a full wrap and are quicker to install.

  • Partial wrap: hood, mirror caps, roof on cars without the glass panel.
  • Chrome delete: window trim and badges.
  • Paint protection film: clear film on the front end, also over a wrap.

Wrapping an Infiniti QX50: body, cut-outs and film

The Infiniti QX50 vinyl wrap covers a body that is 184.8 in (4,693 mm) long on the newest model. Its five-door SUV shape has a large tailgate and a long roof, so the film estimate is around 62 ft (19 m). Roof rails or a glass roof change how the film is laid on top. Since the doors are tall and the bumpers wrap around, a professional install is easier with two people.

Infiniti QX50 wrap ideas should account for the tailgate glass and the roof details. The rear glass is set into the tailgate, so the film ends at the edge of the glass. On some trims, roof rails and a panoramic glass roof or sunroof sit on top, and the film is either cut around them or the rails are removed first. The bumpers may have parking sensors, cameras, and fog lamps, so the installer cuts the film around each one.

How much vinyl to wrap an Infiniti QX50 depends on the generation you have. The first generation is 182.5 in (4,635 mm) to 186.8 in (4,745 mm) long, while the second generation is 184.8 in (4,693 mm). Both bodies use about 62 ft (19 m) of 60-inch (1.52 m) film for a full wrap. If you add chrome or patterned film, plan for about 70 ft (21.5 m).

Questions about wrapping an Infiniti QX50

How much vinyl does it take to wrap an Infiniti QX50?

It takes about 62 ft (19 m) of 60-inch (1.52 m) cast vinyl to wrap an Infiniti QX50 fully. That is the estimate for the newest body, the second generation from 2017 onward. If you use chrome or patterned film, the amount rises to about 70 ft (21.5 m). The first generation is similar in size, so it needs roughly the same material.

Can the roof of an Infiniti QX50 be wrapped?

Yes, the roof of an Infiniti QX50 can be wrapped, but the glass parts are not covered. On some trims, a panoramic glass roof or sunroof is left unwrapped, so the film ends at the edge of the glass. If the car has roof rails, they are either removed before the roof is wrapped or the film is cut along them. The roof is a smaller area, so it is a common partial wrap option.

Can I wrap only the hood or the roof of an Infiniti QX50?

Yes, you can wrap only the hood or the roof of an Infiniti QX50. A partial wrap can cover the hood, mirror caps, or the roof on cars without a glass panel. The hood is a single large panel that is easy to wrap, and the roof is a simple rectangle between the rails. These jobs use less film than a full wrap and are a good way to change the look without covering the whole car.

Is an Infiniti QX50 hard to wrap?

An Infiniti QX50 is not especially hard to wrap, but it has details that add work. The tailgate glass and any roof glass mean the film must be cut precisely at the edges. Some trims have roof rails that come off before the roof is wrapped, and the bumpers may have sensors, cameras, and fog lamps that need cut-outs. The size of the SUV also means you need about 62 ft (19 m) of film and a second pair of hands.